• 소성∙가공
• /
• 제8권2호
• /
• pp.135-142
• /
• 1999

Tube Process(TP) is one of the processes to produce permanent magnets. Advantage claimed for this process is that it can accmplish both densification and anisotropication in one step forming. This process is distinguished from other processes since it uses deformable tube for densification of powder magnets. TP has, however, difficulties in manufacturing permanent magnets from Nd-Fe-B green powder due to folding resulted from large height reduction and localized densification. Therefore, an adequate preform is necessary to reduce folding resulted from large height reduction and localized densification. Therefore, an adequate preform is necessary to reduce folding, lead magnets into almost desired final shape and get uniform densification. In this paper, preform design for TP is carried out without a deformable tube to investigate the behaviour of magnet sinter-forging. Preform design is accomplished to increase the effective magnet area with a near net shape and uniform densification.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1994년도 추계학술대회 논문집
• /
• pp.118-132
• /
• 1994

This paper investigates a new method to design blocker geometry in rib-web type closed die forging. By examining various forging and blocker geometries, it was found that blocker geometry can be generated by eliminating high frequency mode from finisher geometry. In order to formalize the procedure, low pass filters, which can convert finisher to blocker geometry, are proposed. Also discrete Fourier transform is used for computational efficiency. The blocker geometry designed by the present method are compared with the one by an experienced designer. The blocker geometries are also validated by using FEM simulation. Present results shows that the frequency approach may offer a promising method to design blocker automatically.

• 한국정밀공학회지
• /
• 제19권1호
• /
• pp.180-185
• /
• 2002

Aluminum casting/forging process is used to produce an aluminum tie-rod end for the steering system of automobiles. Firstly, casting experiments were carried out to get a good preform for forging the tie-rod end. In the casting experiment, the effects of additives, Ti+B, Zr, Sr, and Mg, on the mechanical properties and the microstructure of a cast preform were investigated. And a finite element analysis was performed to determine an optimal configuration of the cast preform. Lastly, a forging experiment was carried out to make the final product of aluminum tie-rod end by using the above cast preform. In the casting experiments, when 0.2% Ti+B and 0.25% Zr were simultaneously added into molten Al-Si alloy, the highest values of tensile strength and elongation of the cast preform were obtained. When 0.04% Sr were added into the molten aluminum alloy, the finest silicon-structure was observed in the cast preform. The highest hardness was obtained when 0.2% Mg was added. In the forging experiment, It was confirmed that the optimal configuration of a cast preform predicted by FE analysis was very useful. The hardness of a cast/forged product using designed preform was superior to that of required specification.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 추계학술대회 논문집
• /
• pp.15-16
• /
• 2007

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.249-250
• /
• 2013

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.249-250
• /
• 2010

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.113-116
• /
• 1995

In this experimental study,aluminum hotforging was conduct to get superior pistion to cast piston. Cast structure of billet is destroyed, harmful defects is removed by forging process. We proposed the direction od die design by observing formability of product according to die shape. The microstructure of forged products with different preform was investigated to determine inital billet shape. We proposed appropriate heat treatment condition for improvement of mechanical properties.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 추계학술대회 논문집
• /
• pp.255-256
• /
• 2006

• 한국산학기술학회논문지
• /
• 제15권7호
• /
• pp.4057-4064
• /
• 2014

본 연구는 본 연구에서 제안하는 근사 최적화 방법(메타모델 기반의 시뮬레이션 최적화)을 사용하여 저렴한 해석 비용으로 펀치 단조품의 예비성형체(preform)를 설계한다. 본 연구에서 사용한 설계목표는 유효변형률의 균일한 분포이고 설계변수는 예비성형체 치수이며, 구속조건으로 최대 미충진 비율을 사용한다. 이를 위해 먼저 예비성형펀치(반재), 마스터펀치(상부다이) 및 하부다이로 구성되는 단조성형 공정을 DEFORM 시뮬레이션에 의해 모사하고, 이 시뮬레이션 결과가 실제 단조 공정을 모사하고 있는지 확인하는 검증 방법에 관해 소개한다. 또한 본 연구에서 수행한 설계 최적화 과정, 즉 (i) 초기 메타모델의 생성, (ii) 메타모델의 최적화 수행, (iii) 메타모델 최적해의 검증, (iv) 메타모델의 개선에 관하여 상세히 기술한다.

• 한국기계가공학회지
• /
• 제12권6호
• /
• pp.142-151
• /
• 2013

This study develops an automation system for metallic mold design that is applicable in forging non-axial symmetric parts. The metallic mold design program is used to design the metallic mold using two-dimensional axial symmetric metallic molds and to predict the stress concentration using finite element analyses. Then, the program redesigns the metallic mold using variables such as the optimal split diameter, maximum allowable inner pressure, fit tolerance, and stress distribution, which are calculated using the metallic mold design program. When the involute spur gear is forged, stress concentration occurs on the tooth root bounded at the symmetric surface. The SCM4 material is suitable for metallic molds because the stress is less than the yield strength of the insert and it acts on the tooth root regardless of the inner pressure. The metallic mold for forging non-axial symmetric parts can be designed through adjusting the magnitude of the contact pressure. The program developed in this study can be applied to metallic mold designs in involute spur gears of forging, which is an ordinary non-axial symmetric part.