• Journal of Climate Change Research
• /
• v.6 no.3
• /
• pp.185-191
• /
• 2015

This study presents an estimate of on-site surface fuel loadings composed of coarse woody debris (CWD) using $5^{th}$ National Forest Inventory (NFI) data in South Korea. We classified CWD data into forest type, region and decay class, and used conversion factors by decay class and tonne of oil equivalent developed in the country. In 2010, the total wildfire fuel load of CWD was estimated as 8.9 million TOE; those of coniferous, deciduous and mixed forests were 3.5 million TOE, 2.8 million TOE and 2.6 million TOE, respectively. Gangwon Province had the highest wildfire fuel load of CWD (2.3 million TOE), whereas Seoul exhibited the lowest wildfire fuel load of CWD (0.02 million TOE). Wildfire fuel loads of CWD were estimated as 2.9 million TOE, 1.9 million TOE, 2.4 million TOE and 1.7 million TOE for decay classes I, II, III and IV, respectively. The total wildfire fuel load of CWD corresponded to the calorific value of 8.2 million tons crude oil, 2.46% of that of living trees. Proportionate to the growing stock, total wildfire fuel load of CWD was in a broad distinction by region, while its TOE $ha^{-1}$ was not. This implies that there is no need to establish different guidelines by region for management of CWD. The results of this work provide a baseline study for scientific policy guidelines on preventing wildfires by proposing CWD as wildfire fuel load.

• Journal of Korean Society of Forest Science
• /
• v.109 no.4
• /
• pp.454-460
• /
• 2020

The goal of this study was to classify the area of Larix kaempferi forest available for timber production, considering the legal, physical, environmental, and technical constraints, and to optimize the forest resources and the potential of timber production in South Korea for 50 years. The results showed that the area of Larix kaempferi forest available for timber production is limited to 124,000 ha, 48% of the total area. Without further efforts in resource management, sustainable timber production of Larix kaempferi cannot be guaranteed even at the current level of timber supply. To enhance the potential of timber production for this species, two alternatives were considered: a 705-km annual increment of forest roads (alternative 1) and a 1,000-kmannual increment of forest roads (alternative 2) to enlarge forest areas available for timber production. The results showed that alternative 1 is feasiblefor sustainable timber production both at the current level and with a 5% increment of timber supply. However, alternative 1 is not sufficient in the case of a 10% increment of timber supply with a low growing stock, whereas alternative 2 is sufficient. Therefore, an increase in forests roads as well as regeneration efforts are required to improve the timber production potential of Larix kaempferi in South Korea.

• Journal of Korean Society of Forest Science
• /
• v.96 no.3
• /
• pp.259-268
• /
• 2007

This study was conducted to produce forest thematic maps and estimate forest statistics for Pyeongchang Gun using the kNN technique, which has been applied to produce thematic maps of variables of interest including unobserved plots by combining field plot data, remotely sensed data and other digital map data in forest inventories. The estimation errors for three horizontal reference areas (HRAs), whose radii are 20, 40 and 60 km respectively, were compared. Although the precision for the 40 km radius was lower compared to that for the 60 km radius, the 40 km radius was found to be an efficient HRA because their difference in precision was modest. At a value of k=5 nearest neighbors for the selected HRA, the overall accuracy was high. As a result, using the k=5 neighbors within the HRA of 40 km radius, thematic maps of number of trees, basal area, and growing stock per hectare were generated. As compared to the forest statistics based on field sample plots, the estimated means of each parameter from the produced maps were underestimated.

• Journal of Forest and Environmental Science
• /
• v.30 no.2
• /
• pp.218-225
• /
• 2014

Studies were carried out to standardize and develop a suitable macro-propagation technology for large scale production of superior clonal stock through stem cuttings in Commiphora wightii Arnott (Bhandari), a data deficient medicinal plant of arid region. For the purpose, three experiments were conducted. The first experiment was tried to elucidate the impact of various cutting diameters (0.50-0.75 cm, 0.75-1.00 cm, 1.00-1.50 cm, and >1.50 cm) in combination with varying growing conditions (sunlight, shade house and mist chamber) on shoot sprouting and rooting without using exogenous plant growth regulators. Cutting diameter (size 0.75-1.00 cm) in mist chamber has shown maximum sprouting (90.00%) and rooting (73.33%), primary root (6.67) and secondary root (16.67) followed by 1.00-1.51 cm in mist chamber. Minimum sprouting (40.00%), rooting (33.33%), number of shoot (1.33), primary root (1.00) and number of secondary root (1.00) was recorded in cutting diameter (size >1.50 cm) in sunlight. Second experiment was performed to find out optimum growth regulator concentration of rooting hormone (100, 200, 500 and 1000 ppm) of Indole-3-acetic acid (IAA) and Indole-3-butyric Acid (IBA) on adventitious root formation on cuttings diameter (size 0.25-0.50 cm) in comparison to control. Maximum rooting percentage (93.33%) was recorded in 200 ppm followed by 500 ppm (86.66%) of IBA as compared to control, which showed only 60 per cent sprouting. Third experiment was performed with newly formed juvenile micro-cuttings treated with varying concentrations of IAA and IBA. The juvenile cuttings (size 6-10 cm, basal dia <0.25 cm) were selected as micro-cuttings. The cuttings treated with IBA (500 ppm) showed 64.30% rooting as compared to other treatments. Results of above experiments indicate that cuttings (size 0.75-1.00 cm dia) may be developed in mist chamber for better performance. While using heavier cuttings, no growth promoting hormones is required however; growth regulator 200 ppm concentration of IBA rooting hormone was observed optimum for promoting macro-propagation in stem cuttings of lower diameter class (0.25-0.50 cm).

• Journal of Korean Society of Forest Science
• /
• v.85 no.3
• /
• pp.381-395
• /
• 1996

This study examines the nature of policies of the national forest in the colonial Korea during the period 1926-36. The contents of Choson Forestry Policy Plan announced in 1926 by the colonial government were compared with the actual accomplishments appearing in the historical records. The Plan is believed to have two-fold objectives : that is, the attainment of sustainable profits from the management of national forests and the restructuring of the national forest management organizations for the minimization of administration costs of the colonial government. The objectives of the Plan was framed by the influence of the Imperial Japanese Government. The analysis reveals that the timber supply from national forests was increased by two folds during the period of 10 years resulting an enormous decrease in the growing stock of national forests. The number of national forest management stations was decreased steadily while the regeneration of forest logged relied mainly on the natural regeneration, with artificial regeneration ratio of 13% by acreage. Based on the result of analysis, it is concluded that the national forest policy during the period 1926-36 is a resource exploiting policy for the benefit of the Imperial Japan.

• Journal of Korean Society of Forest Science
• /
• v.101 no.2
• /
• pp.266-278
• /
• 2012

The objective of this study was developing dynamic stand growth model to predict diameter at breast height (DBH) growth by thinning intensity and cycle for major tree species of South Korea. The yield table, one of static stand growth models, constructed by Korea Forest Service was employed to prepare dynamic stand growth models for 8 tree species. In the process of model development, the thinning type was designated to thinning from below and equations for predicting the DBH change after thinning by different intensities was generated. In addition, stand density (N/ha), age and site index were adopted as explanatory variables for DBH prediction model. Thereafter, using the model, DBH growth under various silvicuture through integrating such equations considering thinning intensities, and cycles. The dynamic stand growth model of DBH developed in this study can provide understanding of effectiveness in forest growth and growing stock when thinning practice is performed in forest. Furthermore, results of this study is also applicable to quantitatively assess the carbon storage sequestration capability.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.18 no.4
• /
• pp.81-99
• /
• 2015

The acceleration of global warming has required better understanding of carbon cycles over local and regional areas such as the Korean peninsula. Since forests serve as a carbon sink, which stores a large amount of terrestrial carbon, there has been a demand to accurately estimate such forest carbon sequestration. In Korea, the National Forest Inventory(NFI) has been used to estimate the forest carbon stocks based on the amount of growing stocks per hectare measured at sampled location. However, as such data are based on point(i.e., plot) measurements, it is difficult to identify spatial distribution of forest carbon stocks. This study focuses on urban areas, which have limited number of NFI samples and have shown rapid land cover change, to estimate grid-based forest carbon stocks based on UNFCCC Approach 3 and Tier 3. Land cover change and forest carbon stocks were estimated using Landsat 5 TM data acquired in 1991, 1992, 2010, and 2011, high resolution airborne images, and the 3rd, 5th~6th NFI data. Machine learning techniques(i.e., random forest and support vector machines/regression) were used for land cover change classification and forest carbon stock estimation. Forest carbon stocks were estimated using reflectance, band ratios, vegetation indices, and topographical indices. Results showed that 33.23tonC/ha of carbon was sequestrated on the unchanged forest areas between 1991 and 2010, while 36.83 tonC/ha of carbon was sequestrated on the areas changed from other land-use types to forests. A total of 7.35 tonC/ha of carbon was released on the areas changed from forests to other land-use types. This study was a good chance to understand the quantitative forest carbon stock change according to the land cover change. Moreover the result of this study can contribute to the effective forest management.

• Journal of Korean Society of Forest Science
• /
• v.107 no.3
• /
• pp.266-277
• /
• 2018

This study was conducted in clear cutting stands. For the whole-tree yarding operation, a tower-yarder based on excavator with a radio-controlled double clamp carriage was applied to analyze yarding productivity and cost. The productivity and cost of yarding operation was $6.2m^3/SMH$(machine utilization rate, 80.4%) and $13,705won/m^3$, respectively. Although the maximum yarding distance was longer than the previous studies, the setting up time of the tower-yarder was decreased as used straw line. The application of the radio-controlled double clamp carriage improved productivity and reduced costs. Based on the fuel log and growing stock($137.0m^3/ha$), the minimum production($m^3$) and area(ha) were $558.3m^3$ and 4.1 ha for Pinus rigida stands and $433.7m^3$ and 3.2 ha for Quercus mongolica stands, respectively. Based on the this study, it will be possible to select an efficient yarding machine by accumulation of data on minimum production and area for many machines in various harvesting sites.

• Journal of Korean Society of Forest Science
• /
• v.104 no.3
• /
• pp.427-433
• /
• 2015

This study was conducted to provide a method of establishing two-storied forests by the adjustment of stand structures in natural deciduous forests of Pyeongchang area. Three permanent sampling plots of 0.09 ha were established in study site and some tree variables were measured in each sampling plot before the treatment of two-storied system. Stand attributes and stand structures before treatment were estimated based on the data measured in sampling plots. The results indicate that the current stand status is different from typical stand structures of two-storied forests. A simulation technique was applied to predict stand attributes and stand structures after the treatment of two-storied system. Results suggest that significant time is required to accomplish target stand structures even after applying the treatment of two-storied system. Number of trees in the upper canopy class after treatment was predicted to be 170 trees/ha, which adequately meets the target of two-storied forests. It was predicted, however, that the lower canopy class trees has much less trees compared with the typical stand structures of two-storied forests. This problem could be solved with ingrowth of infant trees over time or by under-planting of tolerant species. It is confirmed that the target growing stock volumes of the upper canopy class should be approximately $150m^3/ha$ considering stand status after treatment. It is predicted that twenty years of conversion period is required to accomplish this goal. The changes in stand structures over time should be assessed based on stand inventory carried out every five years, and additional treatments for inducing two-storied forests should be applied if necessary.

• Journal of Korean Society of Forest Science
• /
• v.112 no.1
• /
• pp.32-39
• /
• 2023

Using the logarithmic methods and the generalized method of moments (GMM), this study developed carbon storage equations for maple trees (Acer palmatum Thunb.) planted in an urban settlement area. A total of 20 maple trees of various ages and diameters were destructively harvested to determine their dry weight and carbon concentration by component. The allometric equations with DBH and DBH²×H as independent variables were developed to estimate the carbon storage for each tree component. The carbon concentration of tree components was the highest in stem wood (49.8%) and lowest in stem bark (46.5%). Allometric equations to estimate the carbon storage of tree components (stem, root, aboveground, and total) showed a similar coefficient of determinations (R²) between the allometric equations of the logarithmic method (0.7494-0.9036) and the GMM (0.7085-0.8847). However, the R² values of the leaves and branches were in the range of 0.3027 to 0.6380, lower than those of the R² of the other tree components. These results indicate that the carbon storage of maple trees growing in urban settlement areas can be efficiently predicted from the equations of GMM methods in the case of a small sample size or the heteroscedasticity of logarithmic equations.