• Journal of Periodontal and Implant Science
• /
• v.29 no.3
• /
• pp.483-509
• /
• 1999

Biodegradable barrier membrane has been demonstrated to have guided bone regeneration capacity on the animal study. The purpose of this study is to evaluate the effects of cultured calvarial cell inoculated on the biodegradable barrier membrane for the regeneration of the artificial bone defect. In this experiment 35 Sprague-Dawley male rats(mean BW 150gm) were used. 30 rats were divided into 3 groups. In group I, defects were covered periosteum without membrane. In group II, defects were repaired using biodegradable barrier membrane. In group III, the defects were repaired using biodegradable barrier membrane seeded with cultured calvarial cell. Every surgical procedure were performed under the general anesthesia by using with intravenous injection of Pentobarbital sodium(30mg/Kg). After anesthesia, 5 rats were sacrificed by decapitation to obtain the calvaria for bone cell culture. Calvarial cells were cultured with Dulbecco's Modified Essential Medium contained with 10% Fetal Bovine Serum under the conventional conditions. The number of cell inoculated on the membrane were $1{\times}10^6$ Cells/ml. The membrane were inserted on the artificial bone defect after 3 days of culture. A single 3-mm diameter full-thickness artificial calvarial defect was made in each animal by using with bone trephine drill. After the every surgical intervention of animal, all of the animals were sacrificed at 1, 2, 3 weeks after surgery by using of perfusion technique. For obtaining histological section, tissues were fixed in 2.5% Glutaraldehyde (0.1M cacodylate buffer, pH 7.2) and Karnovsky's fixative solution, and decalcified with 0.1M disodium ethylene diaminetetraacetate for 3 weeks. Tissue embeding was performed in paraffin and cut parallel to the surface of calvaria. Section in 7${\mu}m$ thickness of tissue was done and stained with Hematoxylin-Eosin. All the specimens were observed under the light microscopy. The following results were obtained. 1 . During the whole period of experiment, fibrous connective tissue was revealed at 1week after surgery which meant rapid soft tissue recovery. The healing rate of defected area into new bone formation of the test group was observed more rapid tendency than other two groups. 2 . The sequence of healing rate of bone defected area was as follows ； test group, positive control, negative control group. 3 . During the experiment, an osteoclastic cell around preexisted bone was not found. New bone formation was originated from the periphery of the remaing bone wall, and gradually extended into central portion of the bone defect. 4 . The biodegradable barrier membrane was observed favorable biocompatibility during this experimental period without any other noticeable foreign body reaction. And mineralization in the newly formed osteoid tissue revealed relatively more rapid than other group since early stage of the healing process. Conclusively, the cultured bone cell inoculated onto the biodegradable barrier membrane may have an important role of regeneration of artificial bone defects of alveolar bone. This study thus demonstrates a tissue-engineering the approach to the repair of bone defects, which may have clinical applications in clinical fields of the dentistry including periodontics.

• Journal of International Area Studies (JIAS)
• /
• v.14 no.2
• /
• pp.499-524
• /
• 2010

The purpose of this study is to based on review of theoretical and empirical studies to assess the independence of central banks - the former Socialist republics, including the Russian Federation and Czech, Poland. In addition, the work is expected to clarify whether a link exists between independence and the most important economic indicators such as inflation, economic activity, the budget deficit. And The subject of this study are the formal and actual independence of national banks, as well as limiting factors: political and economic. Background investigation of the problem of independence of central banks from the fact that, according to many economists, it is essential to the successful development of a market economy. The effectiveness of any country's economy due to currency volatility, low inflation, high reliability of the banking system, etc. As far as the independence of monetary regulation contributes to these goals - one of the most actively debated issues in the world of economic theory and practice for a long time. The issue of central bank independence is extremely important for Russia, Czech, Poland. In the near future to the central bank has important tasks, among which are the transition to inflation targeting in the rejection of significant intervention in the foreign exchange market, as well as improving the sustainability of the national banking system. Transparency and independence of the Bank of Russia, Czech Republic, Poland, in my view, should be an important factor in achieving these goals. The countries of Czech Republic, Poland have already made a number of steps to bring the status of their banks to the European standards. Many other developing countries are also in the process of reforming their central banks and the improving conditions of their functioning. However, despite the fact that as a model for reform used by the central banks of countries with developed market economies, central banks in developing countries are still yet deprived of the legal, economic and political independence. A different situation exists in transition space. Because of significant differences in the views of the authorities in transition republics at the necessary level of independence of central banks and the exchange rate and monetary policy reform of monetary management in these countries led to different results.

• Journal of the Society of Disaster Information
• /
• v.19 no.2
• /
• pp.439-450
• /
• 2023

Purpose: When conducting fire inspections in Korea, there are objects that violate the fire protection regulations that require a straight line distance of more than 5m between the air inlet and the discharge section if the floor area is less than 400m2, and this paper analyzes the reasons and conducts a model experimental study to support the need for related fire protection regulations. Method: Domestic firefighting objects were investigated and confirmed, domestic and foreign papers, policies, and laws and regulations were examined, and spaces with a straight line distance of less than 5m and more than 5m between the air inlet and discharge section were selected and analyzed through model experiments in a living room of less than 400m² . Result: When examining the domestic fire protection regulations (NFPCNational Fire Perpormance Code), the separation distance between the air inlet and the outlet is more than 5m when the floor area is less than 400m² , but as a result of the actual investigation, it was confirmed that there are firefighting objects that cannot keep the separation distance. In addition, when a paper review of overseas fire protection regulations for a straight line distance of more than 5m showed that there was no regulation on the straight line distance between the air inlet and the discharge section, the model experiment showed that the discharge speed was better when the straight line distance between the air inlet and the discharge section was more than 5m than when it was less than 5m. Conclusions: In this study, when examining overseas fire laws and regulations by comparing the performance of the fire protection ratio for the straight line distance between the air inlet and the exhaust section, there is no mandatory regulation for the straight line distance, but the domestic fire protection regulations (NFPCNational Fire Perpormance Code) require more than 5m. It is hoped that this will be reflected in the design stage in the future, and a foundation will be laid to reduce the responsibility and burden of fire superintendents.

• Korean Journal of Plant Taxonomy
• /
• v.52 no.1
• /
• pp.54-63
• /
• 2022

Prunus subg. Cerasus is the most planted street and landscaping tree in South Korea, but it is difficult to identify species according to their macro-morphologies, leading to problems when attempting properly to manage species quantities. The purpose of this study is to understand the current status of plant types and species compositions in Bundang Central Park in Bundang-gu of Seongnam City and to discuss the necessity of the management of landscaping tree planting. In April of 2021, during the cherry blossom season, a total of 5,866 planted cherry trees were investigated within an area of 6 km² of Bundang-gu in Seongnam City. As a result, 5,744 trees were sorted into eleven taxa, but the remaining 122 trees were not determined due to their complex morphologies. Prunus ×yedoensis Matsum. accounted for the highest proportion (52.1%), followed by P. serrulata Lindl. var. pubescens Nakai and P. jamasakura Siebold ex Koidz. P. ×nudiflora (Koehne) Koidz., a plant native to Jejudo Island, was not found in this survey. In order to help identify cherry trees based on micro-morphologies, an identification key was presented for the eleven taxa planted as major landscaping trees. It is known that cherry trees frequently form interspecific hybrids in nature. In order to prevent a loss of the genetic originality of native species due to hybridization and gene introgression from foreign cherry trees, it is necessary to manage planting species near the habitats of native taxa and track their origins.

• The Journal of Fisheries Business Administration
• /
• v.4 no.1_2
• /
• pp.19-57
• /
• 1973

Laver io one of the most necessary and seasonal items in Korean food from oldtimes. Laver is lagely eaten in dried form, and its supply depends entirely upon culture weeds. The history of laver culture in Korea about sixty or seventy years is older than in Japan. Significance of laver culture is divided into two aspects, one is food supply in the nation, and the other is export to other countries. Houses engaged in laver culture are about foully thousands, and laver production in 1972 is estimated as 1, 3 bitten sheets. (1 sheet is a dried laver of 20 cm sq, in the shape of paper) Especcially meaning of layer production is the concentration of labour input, and systematic management of labour. From around 1920, the method of laver culture was introduced by Japanese Imperialism for mono culture in shallow seas, and mass products of laver is provided to Japan market, DOMESTIC MARKET Fundamental consume function calculates at below, $D_{(68_71)}$=16354 $Y^{0.471}$ $P^{-1.0662}$ where D is total layer demand, Y income variable, P price variable. It means income elasticity is 476. in the whole country, and price elasticity is 1, 07. But generally income elasticity is higher in urban area than in rural area, as shown at 1, 3 in Seoul city. Expence of laver in house expenditure is mutually correlated with another expence, See Table 12 about the relative function. See Table 14 and 16 about the relation between the gathering and the changes of price in auction, wholesale and retail price support system is for two effects, one of which is constraint of the upper price, the other is rise of the lower price. Before the system control, the equation in three year average calculated as below, $Y_{b}$ ＝18, 907.7455＋15435.9364 t (r=0.89) where the origin t＝0 is the November and the units are month. Post the system control, $Y_{p}$ =30, 047.9636+1, 631.1721t (r＝0.97) therefore, this system has an effect only on the rise of lower price, Average annual margins of laver products at four market levels according to the consumer spent is below. EXPORTING MARKET Japanese demand function of laver products is, Log D=5, 289+1, 108 Log Y-1, 395 Log P (r=0.987) where D is Japanese laver demand, Y income variable, P price variable. according to which income elasticity is 1. 1 and price elasticity is 1.4. Laver production in 1970 tile highest record till then, is estimated as six billion sheets. But the recent improvement of laver culture techniques, the production of seeds and freezing storage of seeds has been stabilized. Futher new culture farms have been developed by means of break- water fences or by floating culture method. These improvements have been backed up with increased demand of laver products. Import quantity and price of Korean laver products are restrained by three organizations, that is producer, distributor and consumer. This relationship calculated by regression equation shows that import is influenced only producer organization, at the sacrifice of consumer profit. For increase to export of laver products, we urgently require to open foreign trade of laver products for Japanese consumer, .and Japan has political responsibility to solve Korean laver structure. But with long run timeseries, as regards Japanese production and import quantity, importing function shows increasing trend as below, 250 million sheets ＜3, 947.1674+0.005 $L_{g}$ ＞) 600 million sheets where $L_{q}$ is relative production quantity of laver in Japan. (unit; 100 thousand sheets) Our Export effort should be put on the highly processed products whithin the restraind quote.ote.

• Journal of Periodontal and Implant Science
• /
• v.26 no.1
• /
• pp.1-26
• /
• 1996

This study was performed to estimate the effects of cultured bone cell inoculated on porous type hydroxyaptite for the regeneration of the artificial alveolar bone defect. In this experiment 3 beagle dogs were used, and each of them were divided into right and left mandible. Every surgical intervention were performed under the general anesthesia by using with intravenous injection of Pentobarbital sodium(30mg/Kg). To reduce the gingival bleeding during surgery, operative site was injected with Lidocaine hydrochloride(l:80,000 Epinephrine) as local anesthesia. After surgery experimental animal were feeded with soft dietl Mighty dog, Frisies Co., U.S.A.) for 1 weeks to avoid irritaion to soft tissue by food. 2 months before surgery both side of mandibular 1st premolar were extracted and bone chips from mandibular body were obtained from all animals. Bone cells were cultured from bone chips obtained from mandible with Dulbecco's Modified Essential Medium contained with 10% Fetal Bovine Serum under the conventional conditions. Porous type hydroxyapatite were immerse into the high concentrated cell suspension solution, and put 4 hours for attachin the cells on the surface of hydroxyapatite. Graft material were inserted on the artificial bone defect after 3 days of culture. Before insertion of cellinoculated graft material, scanning electronic microscopic observation were performed to confirm the attachment and spreading of cell on the hydroxyapatite surface. 3 artificial bone defects were made with bone trephine drill on the both side of mandible of the experimental animal. First defect was designed without insertion of graft material as negative control, second was filled with porous replamineform hydroxyapatite inoculated with cultured bone marrow cells as expermiental site, and third was filled with graft materials only as positive control. The size of every artificial bone defect was 3mm in diameter and 3mm in depth. After the every surgical intervention of animals, oral hygiene program were performed with 1.0% chlorhexidine digluconate. All of the animals were sacrificed at 2, 4, 6 weeks after surgery. For obtaining histological section, tissus were fixed in 10% Buffered formalin and decalcified with Planko - Rycho Solution for 72hr. Tissue embeding was performed in paraffin and cut parallel to the surface of mandibular body. Section in 8um thickness of tissue was done and stained with Hematoxylin - Eosin. All the specimens were observed under the light microscopy. The following results were obtained : 1. In the case of control site which has no graft material, less inflammatory cell infiltration and rapid new bone forming tendency were revealed compared with experimental groups. But bone surface were observed depression pattern on defect area because of soft tissue invasion into the artificial bone defect during the experimental period. 2. In the porous hydroxyapatite only group, inflammatory cell infiltration was prominet and dense connective tissue were encapsulated around grafted materials. osteoblastic activity in the early stage after surgery was low to compared with grafted with bone cells. 3. In the case of porous hydroxyapatite inoculated with bone cell, less inflammatory cell infiltration and rapid new bone formation activity was revealed than hydroxyapatite only group. Active new bone formation were observed in the early stage of control group. 4. The origin of new bone forming was revealed not from the center of defected area but from the surface of preexisting bony wall on every specimen. 5. In this experiment, osteoclastic cell was not found around grafted materials, and fibrovascular invasion into regions with no noticeable foreign body reaction. Conclusively, the cultured bone cell inoculated onto the porous hydroxyapatite may have an important role of regeneration of artificial bone defects of alveolar bone.

• Journal of Global Scholars of Marketing Science
• /
• v.19 no.1
• /
• pp.23-35
• /
• 2009

A hypermarket as the one of the most globally standardized retailing format is also the type of store among various types of stores that the most active in expanding into other foreign markets. Recently, as several Korean retailing companies start to penetrate into Chinese market they differentiate themselves with modern facilities and customers service oriented high-end concept. China and Korea as Far East Asian countries share many common values, however precise and careful analysis should be carried out since there may also be critical differences in socio-economic aspects as well as in consumption patterns due to the level of development stages of retail industry among two countries. Even though precise and careful study is crucial on Chinese retailing market and consumers, none of researches and studies on 'how the quality of service dimensional structure is different between Korea and China', and 'what will be the most important and influential service dimensional factors for Chinese consuers compared to the hypermarkets customers in Korea' in order to improve the level of Chinese consumers satisfaction' have been fulfilled At this point of view, this study uses KD-SQS (Rho Eun Jung & Sir Yong Gu, 2008) which is a measure of Korean hypermarkets service quality to set up a hypothesis on Korean and Chinese consumers, and an empirical analysis is conducted. We try to get the answers about how the comparative importance of Service quality dimensions which decides the level of customer satisfaction is different depending on the cultural dimensions and socio-economic factors among two countries, Korea and China. Based upon the results, we try to give a valuable suggestion of what service dimensional factors should be reinforced to improve the level of CS in Chinese retailing market. Hypotheses for this study are as follows : H1. Each dimension of Service Quality significantly affects the level of CS H2. The effect of 'Basic Benefit' in service quality dimensions on the level of CS is greater in China than in Korea H3. The effect of 'Promotion' in service quality dimensions on the level of CS is greater in China than in Korea H4. The effect of 'Physical Aspects'in service quality dimensions on the level of CS is greater in Korea than in China. H5. The effect of 'Personal Interaction' in service quality dimensions on the level of CS is greater in China than in Korea H6. The effect of 'Policy' in service quality dimensions on the level of CS will be greater in Korean than in China H7. The effect of additional convenience in service quality dimensions on the level of CS will be greater in Korean than in China. More than 1,100 data were collected directly from the surveys of Chinese and Korean consumers in order to verify the hypotheses above. In Korea, stores which have floor space of over $9,000m^2$and opened later than year 2000 were selected for the samples, and thus Gayang, Wolgye, Sangbong, Eunpyeong, Suh-Suwon, Gojan stores and their customers were surveyed. In China, notable differences in the income levels and consumer behaviors between cities and regions were considered, and thus the research area was limited to the stores only in Shanghai. 6 stores which have the size of over $6,000m^2$ and opened later than 2000, such as Ruihong, Intu, Mudanjang, Sanrin, Raosimon, and Ranchao stores were selected for the survey. SPSS 12.0 and AMOS 7.0 were used as statistical tools, and exploratory factor analysis, confirmatory factor analysis, and multi-group analysis were conducted. In order to carry out a multi group analysis that decides whether the structure variables which shows the different effects of 6 service dimensions in Korean and Chinese groups is statistically valid, configural invariance, metric invariance, and structural invariance are tested in order. At the results of the tests, 3 out of 7 hypotheses were supported and other 4 hypotheses were denied. According to the study, 4 dimensions (Basic Benefit, Physical Environment, Policy, and additional convenience) were positively correlated with CS in Korea, and 3 dimensions (i.e. basic benefit, policy, additional convenience) were significant in China. However, the significance of the service-dimensions was turned out to be partially different in Korea and China. The Basic Benefit is more influential in deciding the level of CS in china than Korea, however Physical Aspect is more important factor in Korea. 'Policy dimension' did not make significant difference between two countries. In the 'additional convenience dimension', the differences in 'socio-economic factors' than in'cultural background' were considered as more important in Chinese consumers than Korean. Overall, the improvement of Service quality will be crucial factors to increase the level of CS in Chinese market same as Korean market. In addition, more emphases need to be placed on the service qualities of 'Basic Benefit' and 'additional convenience' dimensions in China. In particular, 'low price' and 'product diversity' that constitute 'Basic Benefit' are proved to be comparatively disadvantageous and weak points of Korean companies compared to global players, and thus the prompt strengthening those dimensions would be urgent for Korean retailers. Moreover, additional conveniences such as various tenants and complex service and entertaining area will be more important in China than in Korea. Besides, Applying advanced Korean Hypermaret`s customer policy to Chinese consumers will help to get higher reliability and to differentiate themselves to other competitors. However, as personal interaction, physical aspect, promotions were proved as not significant for the level of CS in China, Korean companies need to reconsider the priority order of resource allocations when they tap into Chinese market.

• International Commerce and Information Review
• /
• v.10 no.4
• /
• pp.457-491
• /
• 2008

As stage equipment export markets along with special lighting service lack the attraction for already globally established businesses, such markets can be viewed as an advantageous opportunity for SMEs as in general. In reality, global businesses tend to focus on large construction projects and this indicates relatively less substantial markets such as stage equipment and special lighting service export are more suitable for SME businesses. However, possible problems may be recognized as following; doubtful capabilities by such businesses to join in the vast and competitive global market and pursue manufacturing and service based export. This point is also supported by the fact that such in general SME businesses have substantially less experience in exporting products and services abroad. Realizing the distinctive features of the Korean economy, it is unarguable that every sector and area of global market must be regarded and monitored closely. Hence, it can be argued that there is an imminent need for establishment of supportive institution to assist export process of combination of stage equipments and special lighting service. This study emphasizes the need to improve export process of stage equipments, special lighting services as well as other related products and services which have been focused in domestic market only until now. Further, it also analyzed the potential prospect of such direction reconciling current crisis our manufacturing industry is facing. Even though it maybe regarded as one of the niche market for export of Korea in the short term view, stage equipment and special lighting service industry may rapidly grow as the global cultural industries have grown along with the increase of national income earnings overall. Due to such advantageous features, it can be expected that such industries will show strong growth in the near future. After analyzing the fact that Korea's plants (eg. powerplants) export sector is at its boom, there is a need to transform stage equipment and special lighting service export market into a primary market from a secondary(niche) market for SMEs. This study is viewed from the Korean economic and export sector aspect in the aim of seeking a solution to conquest our realistic limit in our export sector by developing a suitable export model. There have been cases of very few attempts to expand abroad by SMEs who have failed miserably due to their failure to adapt to foreign culture, practice and languages as well as substantial lack in experience in export marketing. Despite this, neglecting our manufacturing industry as it is which is showing its limit and problems is out of option therefore, it is imminent that we come up with an effective measure to address this problem and service export can be suggested as one of them. This study reveals manufacturing-service export model of stage equipment and special lighting service and its related areas is recognized as a field with a very strong future and furthermore, it is expected to bring synergy effects in manufacturing and services sector as well. Further, the operation strategy contains combination, composition and fusion(convergence) of manufacturing and service sectors which could derive various of export products which displays greater success probability or this export model. The outcome of this research is expected to become a useful source for enterprises related to such industry which are seeking a possible global expansion. Furthermore, it is also expected to become a catalyst which fastens the process of global expansion and not only that, we are firmly assured that this study will become an opportunity to improve our current policies and institutions related to this area's export market.

• 대한공업교육학회지
• /
• v.36 no.1
• /
• pp.149-166
• /
• 2011

The purpose of this study was to develop a creative problem-solving competition program in order to provide an opportunity for junior high schoolers to solve problems on the basis of technological hands-on activities by deploying their creative problem-solving skills and to foster their cooperative and challenging spirits by tackling the given problems in group. Relevant literature and competition programs were analyzed to develop a junior high school competition program for creative problem solving on the basis of technological hands-on activities. This study was implemented in three stages: preparing, developing and applying. In the preparation stage, the content structure of technology and the fields of corresponding hands-on activities were investigated, and creativity theories were analyzed. Besides, domestic and foreign creativity-related competition programs were checked. In the development stage, an overview of the nature, object, question making and evaluation of a competition program for creative problem solving on the basis of technological hands-on activities was presented, and a program was developed, which consisted of three stages: planning, operating and evaluating. In the application stage, every student in a selected junior high school participated in the competition program. The findings of the study were as follows: First, the competition program developed in this study intended to offer a chance for every junior high schooler to solve problems on the basis of technological hands-on activities to display their creative problem-solving skills. Second, the program was designed to include planning, operating and evaluation stages, after the nature and object of the competition program and in which way question making and evaluation should be fulfilled were determined. Third, the competition program dealt with five areas according to the content structure of technology: manufacturing technology, construction technology, transportation technology, communication technology and biotechnology. And questions for each area and student worksheets were developed. Fourth, the program was utilized in a junior high school to give an example.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.1
• /
• pp.64-81
• /
• 2019

Jeju Island is located at a strategic position, making it an important waypoint on the sea routes of East Asia. As a result, the island suffered many foreign invasions throughout history. Especially, it is widely known that Japanese pirates frequently invaded the island as the island was located on their way as they were sailing to China. Therefore, they built various defensive structures across the island. Fortresses, where a small number of defenders may fend off an enemy, were built in multiple places on the island. This was a strategy for the island to defend itself, as it was almost impossible to get prompt support in an emergency from the mainland due to the long distance. Fortresses, or walled cities, were the center of politics, culture, and economy of many areas. Therefore, they are a valuable resource to study the history and geographical characteristics of a place. For this reason, studies on fortresses started quite early on. However, studies on such relics in Jeju Island began very late. The research on fortresses was launched during the Japanese occupation for most mainland areas. However, studies on the relics on Jeju Island began as late as the 1970s. This was because scholars did not understand the importance of the city walls and fortresses on Jeju Island, and there were no researchers who specialized in city walls or fortresses on the island, as well. As archeological research on Jeju Island began to gain momentum, the studies on city walls and fortresses saw progress; however, these studies are still of an elementary level. In this study, the author summarized the status of studies on the city walls and fortress relics in Jeju Island and their preservation/maintenance status by era. According to the findings of this study, there were two Corean-era city wall/fortress relics and thirteen from the Chosun era., The researcher analyzed and presented the status of studies and the current condition of the relics. The status of attached structures was also documented.Furthermore, a short review of the maintenance work performed so far was provided. Also, the researcher mentioned the problems that accompanied the maintenance process of these relics, along with suggestions for improvement that could be referred to in future restoration/maintenance projects.