• 대한정형외과스포츠의학회지
• /
• 제3권1호
• /
• pp.22-24
• /
• 2004

Snowboarding has become one of the premier alpine sports. The past decade has seen the popularity of snowboarding increase dramatically and the recent Winter Olympic Game showcased the strong visual appeal of the sport and the youth-oriented lifestyle and culture that accompanies it. The injury profile of the sport has also undergone change along with technological advances in boot and binding systems and the changing demographics of the sports participants. Central to the development of injury-prevention strategies is knowledge of the profile of injuries that occur, understanding those who are at particular risk and, if possible, the biomechanical factors involved in each injury type. Snowboarding was initially considered a dangerous, uncontrolled, alpine sport - an opinion based on little or no scientific evidence. That evidence has rapidly grown over the past decade and we now know that snowboard injury rates are no different to those in skiing; however, the injury profile is different. The purpose of this review is to give some perspective to the current snowboard injury literature. It discusses not only the demographic profile of those injured and the type of injuries that occur, but also gives some insight into the progress that has occurred in determining the impact of specific prevention strategies, such as splints to prevent injuries to the wrist/forearm. As the literature indicates, however, some things will not change, e.g. injuries are more likely to occur in beginners and lessons need to be reinforced as a fundamental aspect of any injury-prevention strategy.

• Annals of Clinical Neurophysiology
• /
• 제19권1호
• /
• pp.28-33
• /
• 2017

Background: Previous studies of radial nerve conduction study (NCS) did not present how to measure the length of the radial nerve across the elbow, and did not even mention how to manage the spiral course of the nerve. This study aimed to applicate the most reliable method to measure the length of the radial nerve during NCS. Methods: Three points (A, B, and C) were determined along the relatively straight course of the radial nerve. The distance was measured using three different methods: L1) straight distance corresponding to the A-C distance, L2) sum of the distances corresponding to the A-B-C distance, L3) based on the L2, but the elbow is flexed at a $45^{\circ}$ angle. We compared the three methods of distance measurement and the calculated nerve conduction velocities (V1, V2, and V3) in normal healthy subjects. Results: 19 normal participants were enrolled. The mean value for method L1, L2 and L3 were $22.5{\pm}1.8cm$, $24.0{\pm}2.1cm$, and $23.2{\pm}2.1cm$ (p < 0.001). Calculated conduction velocities using those distance measurement methods as follows (p < 0.001): V1 ($60.9{\pm}2.7m/s$), V2 ($64.6{\pm}3.3m/s$), and V3 ($63.4{\pm}3.9m/s$). V2 was significantly greater than V1 and V3 (p < 0.001, p = 0.010, respectively). Conclusions: The distance measurement using a stopover point near the lateral epicondyle between two stimulus points in position of a fully extended elbow with forearm pronation is the most appropriate posture for radial motor NCS.

• 한국안전학회지
• /
• 제20권2호
• /
• pp.169-174
• /
• 2005

최근 산업현장 전반에 걸쳐 작업관련성 근골격계질환의 발생이 증가하고 있으며 그 피해의 규모도 점점 확대되어 가고 있다. 뿐만 아니라, 과거에는 주로 중량물 취급 또는 단순반복적인 작업등에 의해서 발생하였지만 최근에는 대부분의 생산현장에서 컴퓨터를 이용한 자동화가 이루어지고 가정용 PC가 널리 보급됨에 따라 컴퓨터의 사용과 관련한 근골격계질환의 발생이 증가하고 있다. 많은 사람들이 컴퓨터의 사용과 관련한 불편함 및 통증을 호소하면서 각종 보조도구들이 개발 및 판매되고 있으나 대부분 그 효과가 입증되지 않은 상태로 사용되고 있어서 오히려 이러한 보조도구의 사용이 근골격계질환의 발생위험성을 더 높아지게 할 수도 있다. 본 연구에서는 마우스 사용 시 보조도구로 이용되는 전완 지지대의 사용에 대하여 그 효과를 실험을 통하여 평가하였다. 본 실험에서는 Borg's scale과 근전도(Electromyography : EMC)를 이용하여 측정하였으며 분산분석(Analysis of Variance : ANOVA)을 통해 유의성을 검증하였다. 측정자료를 분석한 결과 전완지지대'의 사용이 오히려 작업의 효율을 떨어뜨리고 작업자가 느끼는 불편함 및 통증의 정도와 근육의 활동량을 증가시킴을 알 수 있었다.

• 한국정보전자통신기술학회논문지
• /
• 제12권5호
• /
• pp.475-481
• /
• 2019

스플린트는 마비, 구축 등이 나타난 환측에 적용하는 대표적인 보조기로서 전통적으로 숙련된 전문가의 수작업을 통해 제작된다. 제작과정은 열가소성 소재를 가열한 후 부드러워진 소재를 환측 부위에 접촉하며 해당 부위의 표면에 피팅시키는 과정을 반복하여 이루어진다. 이러한 전통적 방식은 저온화상의 위험, 제작자의 숙련도에 따른 완성도의 차이 등 여러 문제점을 가지고 있다. 이러한 단점을 보완하기 위하여 3D 프린팅 기술을 이용한 다양한 접근이 시도되고 있으나 3D 스캐너를 이용하는 경우 고비용의 문제, 수작업 측정의 경우 정확도의 문제 등의 단점을 나타내고 있다. 본 연구는 인체의 좌우 대칭성에 착안하여 건측 아래팔의 기하 특징을 이용하여 환측 스플린트를 3D 프린팅 기술로 제작하는 가능성에 관한 사전 연구이다. 디지털 사진과 사진측량기법을 이용하여 건강한 성인 남성으로부터 양측 아래팔의 3차원 가상 모델을 생성하고, 매 20mm 위치마다 둘레 길이 및 단면적을 측정하였다. 동일한 피험자네서 우세측과 비우세측 사이의 둘레 길이 및 단면적은 허용할 만한 수준의 차이를 나타냈으며, 우세측과 비우세측 사이에서 동일한 변수들 간에 높은 수준의 양의 상관관계를 나타냈다. 이러한 결과로부터 건측 아래팔의 기하 특징을 이용하여 3D 프린팅 기술의 적용을 통해 환측 스플린트 제작 가능성을 확인하였다.

• 대한인간공학회지
• /
• 제16권1호
• /
• pp.73-83
• /
• 1997

It is improtant to get accurate information about the grip strength for designing ergonomic grips and handles. It has been known that the excessive and repetitive use of grip force and unnatural posture of the wrist may cause cumulative trauma disorders (CTDs) such as carpal tunnel syndrome, tendrome, tendonitis, DeQuervan's disease, etc. In this paper we have measured the grip strength for sitting and standing posture for Korean adults ; 114 males and 105 females aged from the 20's to above the 50's. And this paper performed statistical analysis for deriving characteristics between grip strength and anthropometric data. The results are as follows ; (1) The maximum grip strength posture is exerted under standing posture with the elbow in full extension (180 .deg. ) for both males and females (2) There is significant difference among posture, sex and right and/or left handedness (3) Grip strength decreases with age for male, but it traces an inverted U curve for female (4) Grip strength has corre- lations with the age, weight, height, BSA, forearm length, hand length, thickness of wrist, circumference of wrist, and breadth of wrist for males.

• 대한물리의학회지
• /
• 제3권4호
• /
• pp.293-299
• /
• 2008

Purpose : The purpose of this study was to investigate the effect of color stimuli on the grip power and the pinch power. Methods : For this experimental study, total 59 healthy college students, who were divided into Red color group and Green color group. Each group was assessed before and after color stimuli(10minutes). Subjects were for using standardized positioning with shoulder adducted and neutrally rotated, elbow flexed at 90 degree and the forearm and wrist in neutral position. Results : All the two groups showed significant differences in the variation of grip power and pinch power under color stimuli(P>.05) but there was no significant variation in grip power and pinch power among groups. Conclusion : This study precedes following study which is focused on the proposal of suitable or appropriate color circumstance for treatment room. Further studies are need with more subjects on long-term outcome.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1996년도 추계학술대회논문집
• /
• pp.238-243
• /
• 1996

Grip strength is a very important basic data for ergonomic design of hand tools, grips, handles and etc.. Excessive grip strength is contineously exerted to handle the machines or tools, it might cause a musculoskeletal disorder such as cumulative trauma disorders. Capal tunnel syndrome is a typical nerve disorder anomg CTDs. In this paper we have measured the grip strength under sitting and standing posture for Korean adults ; 113 male and 105 female aged from 20' to the above 50' . And this paper performed statistical analysis for driving out characteristics between grip strength and anthropometric data. The results are as follows ; (1) The maximum girp strength is exerted under standing posture with the elbow in full extension(180 .deg. ) for both of male and female (2) There is significant difference in posture, sex and right left hand (3) Grip strength decreases with age for male, but it traces an inverted U curve for female (4) Grip strength has a correlation with age, weight, height, BSA, forearm length, hand length, thickness of wrist, circumference of wrist and breadth of wrist for male

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 A
• /
• pp.468-472
• /
• 1992

In this paper, we classified electromyographic(EMG) signal for prothesis control using neural network. For this study fast Fourier transform(FFT) with ensemble averaged spectrum is applied to two-channeI EMG signal for biceps and triceps. We used the three layer network. And a cumulative back-propagation algorithm is used for classification of six arm functions, flexion and extension of elbow and pronation and supination of the forearm and abduction and adduction of wrist.

• Earthquakes and Structures
• /
• 제23권6호
• /
• pp.535-547
• /
• 2022

Handball sport, as its name postulates, is a team sport which highly physical workout. During a handball play, several ball impacts are applied on the hands resulting vibration in the forearm, upper arm, shoulders and in general in whole body. Hand has important role in the handball's game. So, understanding about the dynamics and some issues that improve the stability of the hand is important in the sport engineering field. Ulna and radius are two parallel bones in lower arm of human hand which their ends are located in elbow and wrist joint. The type of the joint provides the capability of rotation of the lower arm. These two bones with their ends conditions in the joints constructs a 4-link frame. The ulna is slightly thinner than radius. So, understanding about hand kinematics in handball's game is an important thing in the engineering field. So, in the current work with the aid of a multi-physics simulation, dynamic stability analysis of the ulna and radius bones will be presented in detail.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1944-1947
• /
• 2005

In this paper, the control of a prosthetic arm using the flex sensor signal is described. The flex sensors are attached to the biceps and triceps brchii muscle. The signals are passed a differential amplifier and noise filter. And then the signals are converted to digital data by PCI 6036E ADC. From the data, position and velocity of arm joint are obtained. Also motion of the forearm - flexion and extension, the pronation and supination are abstracted from the data by proposed algorithm. A two D.O.F arm with RC servo-motor is designed for experiment. The arm length is 200 mm, weight is 4.5 N. The rotation angle of elbow joint is $120^{\circ}$. Also the rotation angle of the wrist is $180^{\circ}$. Through the experiment, we verified the possibility of the prosthetic arm control using the flex sensor signal. We will try to improve the control accuracy of the prosthetic arm continuously.