• Journal of the Korean Wood Science and Technology
• /
• 제42권1호
• /
• pp.20-26
• /
• 2014

본 연구에서는 유한요소해석을 이용하여 응력적층 바닥판의 구조성능을 평가하였다. 바닥판의 구조성능은 처짐과 응력, 압체력의 변화로 평가할 수 있다. 하중 재하 후 바닥판의 처짐 형상을 확인한 결과 하나의 판처럼 거동하는 것을 확인하였다. 이는 압체력에 의해 각 부재 사이에 마찰력이 작용했기 때문이다. 또한 초기 압체력과 산출된 압체력을 비교한 결과 바닥판의 처짐과 함께 압체력이 감소했다. 이는 하중에 의해 바닥판의 변형이 발생하면서 작용하는 힘이 줄어듦에 따라 압체력이 감소한 것으로 판단된다. 그러나 재료의 소성 특성이 제대로 반영되지 않았기 때문에 잔류응력과 잔류변형이 고려되지 않았으므로 추후 이에 대한 연구가 필요하다.

• 대한기계학회논문집A
• /
• 제28권9호
• /
• pp.1352-1358
• /
• 2004

The mechanical spring is one of widely used machine elements. Among various kinds, flat-type spring loaded by a rotating pin was studied. A flat spring was simplified to a cantilever beam, and numerical analysis was attempted. Since the loading pin rotates about a separate axis from the fixed spring or vice versa, the location, direction, and magnitude of the contact force including normal contact and friction loads vary accordingly. Meanwhile, the spring is deformed substantially as the relative motion progresses. Therefore, this problem needs to be formulated taking the follower loading characteristics and geometrical non-linearity into account. Derived nonlinear differential equation was solved to yield the spring deflection, contact force and the torque to rotate the pin, and the result was compared with a finite element solution. Also, the influences of principal design parameters were studied. The proposed methodology is expected to be useful for the design of pin-loaded flat spring and the prevention of mechanical failures in the form of yielding or fatigue failure of spring or severe wear of the components.

• Journal of Mechanical Science and Technology
• /
• 제16권4호
• /
• pp.436-447
• /
• 2002

In this study, the dynamic response of a catenary system that supplies electrical power to high-speed trains is investigated. One of the important problems which is accompanied by increasing the speed of a high-speed rail, is the performance of stable current collection. Another problem which has been encountered, is maintaining continuous contact force between the catenary and the pantograph without loss of panhead. The dynamic analyses of the catenary based on the Finite Element Method (FEM) are performed to develop a pantograph suitable for high speed operation. The static deflection of the catenary, the stiffness variation in contact lines, the dynamic response of the catenary undergoing the force of a constantly moving load and the contact force were calculated. It was confirmed that a catenary model is necessary to study the dynamic characteristics of the pantograph system.

• 한국정밀공학회지
• /
• 제23권2호
• /
• pp.51-56
• /
• 2006

This paper shows the development of flexible force sensor using the fiber Bragg grating. This force sensor consists of a Bragg grating fiber and flexible silicone rubber (DC184, Dow corning co. Ltd). This sensor does not have special structure to maximize the deflection or elongation, but have good sensitivity and very flexible characteristics. In addition, this sensor has the immunity to the electro magnetic field and can be multiplexed easily, which is inherited from the characteristics of fiber Bragg grating sensor. In the future, this sensor can be utilized the tactile sensor system minimizing the sensor size and developing the fabrication method.

• International Journal of Automotive Technology
• /
• 제6권5호
• /
• pp.483-489
• /
• 2005

Based on a two-degree of freedom vehicle model, this paper investigates ride comfort for a heavy off-road vehicle mounted a nonlinear hydropneumatic spring, which is influenced by nonlinear stiffness and damping characteristics of the hydropneumatic spring. Especially, the damping force is derived by applying H. Blasius formula in modeling process according to the real physical structure of the hydropneumatic spring, and the established model of nonlinear stiffness characteristics have been validated by experiments. Furthermore, the effects of parameter variations of the hydropneumatic spring, such as initial charge pressure and damping coefficient, on body acceleration, suspension deflection and dynamic tire deflection are also investigated.

• 한국정밀공학회지
• /
• 제12권5호
• /
• pp.88-97
• /
• 1995

The leaf spring is used in the suspension of most buses and trucks due to its compactness, which reduces the shock-force and the vibration from the road, and increases passenger comfortability and carlife. Of the various kinds of leaf springs, the leaf spring without eyes can be found easily in the heavy duty truck, and has different characteristics to the leaf spring with eyes in the case of large free camber. Because of radius change, the leaf without eyes slips on the supports, which makes the deflection. The difference is due to this deflection. In this paper, we show the general method of characteristic analysis, for example, Pandan method, can be no more applicable to these springs. Thus considering the geometry deflection by slip, we have developed the equation of the characteristic of the leaf spring without eyes and prove the effectiveness of this equation by experiment. From the result, at large camber the slip deflection is large and as camber smaller, this is smaller. At the camber behind some value, the effect of slip no longer influence to the characteristic of leaf springs.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1997년도 추계학술대회 논문집
• /
• pp.88-93
• /
• 1997

Ball-end milling process is widely used in the die and mold manufacturing because of suitable for the machining of free-form surface. Pencil cutting can eliminate overload in uncut area caused by large diameter of ball-end mill before finish cutting. As the ball-end mill for pencil cutting is long and thin, it is easily deflected by cutting force. The tool deflection when pencil cutting is one of the main reason of the machining errors on a free-from surface. The purpose of the research is to find out the characteristics of deflected cutter trajectory by eddy-current sensor.

• Smart Structures and Systems
• /
• 제19권4호
• /
• pp.431-439
• /
• 2017

This investigation is aimed to develop a model of experimental-computation determination of a support moment of a cantilever beam loaded with concentrated force at its end including the optimal choice of coordinates of deflection data points and parameters of transformation of deflection data in case of insufficient accuracy of the assignment of initial parameters (support settlement, angle of rotation of the bearing section) and cantilever beam length. The influence of distribution and characteristics of sensors on the cantilever beam on the accuracy of determining the support moment which improves in the course of transition from the uniform distribution of sensors to optimal non-uniform distribution is shown. On the basis of the theory of inverse problems the method of transformation reduction at numerical differentiation of deflection functions has been studied. For engineering evaluation formulae of uncertainty estimate to determine a support moment of a cantilever beam at predetermined uncertainty of measurements using sensors have been obtained.

• International Journal of Aeronautical and Space Sciences
• /
• 제7권1호
• /
• pp.99-105
• /
• 2006

In this study, nonlinear static and dynamic aeroelastic analyses for a high-aspect-ratio wing have been performed. To achieve these aims, the transonic small disturbance (TSD) theory for the aerodynamic analysis and the large deflection beam theory considering a geometrical nonlinearity for the structural analysis are applied, respectively. For the coupling between fluid and structure, the transformation of a displacement from the structural mesh to the aerodynamic grid is performed by a shape function which is used for the finite element and the inverse transformation of force by work equivalent load method. To validate the current method, the present analysis results of a high-aspect-ratio wing are compared with the experimental results. Static deformations in the vertical and torsional directions caused by an angle of attack and gravity loading are compared with experimental results. Also, static and dynamic aeroelastic characteristics are investigated. The comparisons of the flutter speed and frequency between a linear and nonlinear analysis are presented.

• 한국전산구조공학회논문집
• /
• 제34권6호
• /
• pp.371-383
• /
• 2021

강-콘크리트 편개형 방폭문은 외피 구조로서의 강박스 내에 콘크리트 슬래브가 채워진 구조로서 힌지 및 렛치와 같은 지지부재에 의해 벽체에 고정되어 설치된다. 폭압이 작용하는 방향과 같은 정방향으로의 처짐 거동에 대해서는 많은 연구가 되어 왔으나, 부방향 처짐 거동에 대한 연구는 상대적으로 미흡한 수준이다. 본 연구에서는 폭압을 받는 편개형 방폭문의 부방향 처짐 단계에서 발생하는 반발 거동(rebound behavior)에 대해 유한요소해석으로 변수 분석을 하였다. 분석결과에 따르면 방폭문의 소성변형 내지는 파괴 정도, 반발작용 전후의 운동량 및 운동에너지 변화가 반발거동에 영향을 미치는 주요 요소로 분석되었다. 또한, 방폭문의 거동 특성이 준정적 영역에 속하는 경우에 비해 충격영역에 속하는 경우에서 더 큰 반발력이 발생하는 것으로 나타났는데, 이와 같은 결과는 변형에너지 보다 운동에너지가 상대적으로 더 크게 증가하는 충격영역에서의 거동 특성이 원인인 것으로 사료된다. 반발작용의 결과로 인해 지지부재에 과도한 변형이 발생할 수 있으므로 성능분석 및 설계 과정에서 이에 대한 고려가 필요하다. 또한, 부압이 미치는 영향을 검토한 결과에 따르면 강-콘크리트 방폭문의 경우에서도 반발에 의한 영향 및 부압 모두가 방폭문의 부방향 처짐에 기여할 때 반발력이 상대적으로 더 크게 증가하는 것으로 나타났다. 이와 같은 중첩 효과의 발생조건은 구조체 특성 및 폭발조건 등에 따라 다를 수 있으므로 이에 대해서는 더 많은 연구가 필요할 것으로 판단된다.