• Speech Sciences
• /
• v.11 no.1
• /
• pp.65-72
• /
• 2004

The force of articulation is different between voiced and voiceless consonants in the binary opposition system. However, the Korean voiceless stop consonants have a triple opposition system: lenis, aspirated, and glottalized. The aim of this study is to find the primary distinctive feature between the force of articulation and the aspiration for the three different types of Korean stops. Two native speakers of the Seoul dialect participated to this study. The corpus was composed of less than eight syllabic words containing consonants in word-initial position and intervocalic position. Radiocinematography and Mingography were used to analyze the articulatory tension and acoustic characteristics. Korean stops have independent features of articulatory tension and aspiration, in which the indices are different according to position. However, in this system which does not have the opposition of sonority, the force of articulation is the primary distinctive feature and the feature of aspiration is subsidiary.

• The Journal of Advanced Prosthodontics
• /
• v.4 no.1
• /
• pp.7-12
• /
• 2012

PURPOSE. Articulation paper mark size is widely accepted as an indicator of forceful tooth contacts. However, mark size is indicative of contact location and surface area only, and does not quantify occlusal force. The purpose of this study is to determine if a relationship exists between the size of paper marks and the percentage of force applied to the same tooth. MATERIALS AND METHODS. Thirty dentate female subjects intercuspated into articulation paper strips to mark occlusal contacts on their maxillary posterior teeth, followed by taking photographs. Then each subject made a multi-bite digital occlusal force percentage recording. The surface area of the largest and darkest articulation paper mark (n = 240 marks) in each quadrant (n = 60 quadrants) was calculated in photographic pixels, and compared with the force percentage present on the same tooth. RESULTS. Regression analysis shows a bi-variant fit of force % on tooth (P<.05). The correlation coefficient between the mark area and the percentage of force indicated a low positive correlation. The coefficient of determination showed a low causative relationship between mark area and force ($r^2$ = 0.067). The largest paper mark in each quadrant was matched with the most forceful tooth in that same quadrant only 38.3% of time. Only 6 2/3% of mark surface area could be explained by applied occlusal force, while most of the mark area results from other factors unrelated to the applied occlusal force. CONCLUSION. The findings of this study indicate that size of articulation paper mark is an unreliable indicator of applied occlusal force, to guide treatment occlusal adjustments.

• Archives of Plastic Surgery
• /
• v.51 no.3
• /
• pp.275-283
• /
• 2024

Background Shortage of speech and language therapists results in lack of speech services. The aims of this study were to find the effectiveness of a combination speech therapy model at Level IV: General speech and language pathologist (GSLP) and Level V: Specific speech and language pathologist (SSLP) in reduction of the number of articulation errors and promotion the quality of life (QoL) for children with cleft palate with or without cleft lip (CP ± L). Methods Fifteen children with CP ± L, aged 4 years 1 month to 10 years 9 months (median = 76 months; minimum:maximum = 49:129 months) were enrolled in this study. Pre- and post-assessment included oral peripheral examination; articulation tests via Articulation Screening Test, Thai Universal Parameters of Speech Outcomes for People with Cleft Palate, Hearing Evaluation, The World Health Organization Quality of Life Brief_Thai (WHOQOL-BRIEF-THAI) version questionnaire for QoL were performed. Speech therapy included a 3-day intensive speech camp by SSLP, five 30-minute speech therapy sessions by a GSLP, and five 1-day follow-up speech camps by SSLP that provided four 45-minute speech therapy sessions for each child. Results Post-articulation revealed statistically significant reduction of the numbers of articulation errors at word, sentence, and screening levels (median difference [MD] = 3, 95% confidence interval [CI] = 2-5; MD = 6, 95% CI = 4.5-8; MD = 2.25, 95% CI = 1.5-3, respectively) and improvement of QoL. Conclusion A speech task force consisting of a combination of Level IV: GSLP and Level V: SSLP could significantly reduce the number of articulation errors and promote QoL.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.838-841
• /
• 2005

This study was carried out to analyze the effect of wind load on the structural stability of a 50ton articulation type container crane using wind tunnel test and provide a container crane designer with data which can be used in a wind resistance design of an articulation type container crane assuming that a wind load 75m/s wind velocity is applied in an articulation type container crane. Data acquisition conditions for this experiment were established in accordance with the similarity. The scale of an articulation type container crane dimension, wind velocity and time were chosen as 1/200, 1/13.3 and 1/15. And this experiment was implemented in an Eiffel type atmospheric boundary layer wind tunnel with $11.52m^2$ cross-section area. Each directional drag and overturning moment coefficients were investigated and uplift forces at each supporting point due to the wind load were analyzed.

• Journal of Oral Medicine and Pain
• /
• v.47 no.4
• /
• pp.206-211
• /
• 2022

Purpose: The purpose of this study is to develop a reproducible and reliable method for evaluating the masseter's functional state by measuring the masseter muscle with ultrasonography (US). Methods: Nineteen healthy adults (9 males, 10 females) were the subjects of this study. During US scanning, the image was taken from the thickest part of the masseter muscle in the image. To evaluate changes in thickness during masseter function, US images were taken of the participant's masseter muscle at rest and during clenching. In this study, US scanning was conducted using two approaches to compare the difference in masseter muscle thickness determined when inducing maximum bite force (MBF). Results: All 19 subjects completed US scanning of the masseter muscle at rest and during clenching under the conventional method and the articulation paper method. There was no difference in masseter muscle thickness measured at rest. However, the thickness of the masseter muscles determined by the articulation paper during jaw clenching was greater than that measured by the conventional method. Conclusions: In conclusion, using the US for masseter muscle evaluation can offer objective and functional information on the masseter muscle. A standardized US scanning method needs to be developed to obtain reproducible and reliable information on the masseter muscle at rest and during clenching. In particular, generating MBF using an articulation paper can be a reproducible and reliable method of measuring the functional state of the masseter muscle.

• Journal of Power System Engineering
• /
• v.11 no.2
• /
• pp.58-63
• /
• 2007

Vehicular safety and occupant injury have been of considerable interest to the public. The dynamic response of an articulated vehicle is different from that of single body vehicle due to its geometric and inertia properties. Articulated vehicles have the tendency to jackknife if they lose driving safety. Influence of factors for driving safety of an articulated vehicle(Tractor-Semitrailers) has been analysed by the EDVTS, a kinetic analysis program for an articulated vehicle. EDVTS permits an analyst to investigate the effect of many variables in a short period of time, and enables to obtain an accurate explanation of driving safety. The factors used in the analysis include the load, friction coefficient, tire flat, increase of braking force, and trailer geometry. Based on the results, the articulation angle and driving safety were influenced remarkably by the load, coefficient of friction, increase of braking force. However, trailer geometry, such as length and width, did not affect articulation angle and driving safety

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2005.10a
• /
• pp.235-240
• /
• 2005

Articulation type container cranes are the boom forms an inverted L shape when raise. The inner boom section is nearly vertical when raise and the outer boom section is nearly horizontal. Articulation type container cranes were developed as a lower height crane to meet aircraft clearance requirements. Because the height of an Articulation type container crane is about 70m, the crane is subjected to the effect of Wind load. Therefore, the problem on the effect of Wind load is receiving carefully study. The researches for the effect of wind load on the structural stability of a conventional container crane are conducted. In this study, we carried out the investigation for an articulation type container crane. When a wind load is applied to a container crane, we analyzed the reaction force distribution at each supporting point of a crane with respect to a wind load direction and the effect of the change of the machinery house location on the structural stability rf a crane by carrying out Finite Element Analysis.

• Korean Institute of Interior Design Journal
• /
• v.21 no.3
• /
• pp.40-49
• /
• 2012

The purpose of this study is to look into an articulation between architecture and site of Le Corbusier's works. The first of his principals, "piloti" shown in "5 principals in new architecture" represents the articulated relationship between architecture and site. It certainly works as a driving force of new architecture Le Corbusier pursued. The study presumed that this is the constructive application of "Modernity" with new technology and materials during the turn of century. It also seems to be a tool for visual presentation of implied "Will of Form" for his paintings and architecture as well. In this perspective, this study suggests an assumption of a certain connection between the principal of spatial articulation on his purism paintings and the architectural spaces created by piloti. The study finds evidences that supports the above mentioned assumption; first, the inter-relationship between the interval spaces on his paintings and lifted box, second, the movement of space as overlapped spaces, and finally, overlapped volume which is represented by intersection.

• The Journal of Churna Manual Medicine for Spine and Nerves
• /
• v.5 no.2
• /
• pp.49-55
• /
• 2010

This study was performed to report the effect of oriental medical treatment and general biomechanic manipulation on a patient with upper limb palsy caused by postural brachial plexus injury. The patient was treated with acupuncture, herb medicine and general biomechanic manipulation. The effectiveness of treatment was evaluated with range of motion, visual analogue scale and manual muscle test. After 11 times treatment, motion and muscular force were progressed, pain was decreased. This result suggests that oriental medical treatment and general coordinative manipulation are effective to care the postural brachial plexus injury.

• Journal of the Ergonomics Society of Korea
• /
• v.15 no.2
• /
• pp.165-176
• /
• 1996

Hand posture and force, which define aspects of the way an object is grasped, are features of robotic manipulation. A means for specifying these grasping "flavors" has been developed that uses an instrumented glove equipped with joint and force sensors. The new grasp specification system is being used at the Pennsylvania State University (Penn State) in a Virtual Reality based Point-and-Direct (VR-PAD) robotics implementation. In the Computer Integrated Manufacturing (CIM) Laboratory at Penn State, hand posture and force data were collected for manipulating bricks and other items that require varying amounts of force at multiple pressure points. The feasibility of measuring desired grasp characteristics was demonstrated for a modified Cyberglove impregnated with FSR (Force Sensitive Resistor) pressure sensors in the fingertips. A joint/force model relating the parameters of finger articulation and pressure to various lifting tasks was validated for the instrumented "wired" glove. Operators using such a modified glove may ultimately be able to configure robot grasping tasks in environments involving hazardous waste remediation, flexible manufactruing, space operations and other flexible robotics applications. In each case, the VR-PAD approach improved the computational and delay problems of real-time multiple- degree-of-freedom force feedback telemanipulation.