• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.14-19
• /
• 2000

A machine tool has some serous stability problem in the from of tool chatter during the cutting process. Chatter vibration deteriorates the surface finish, reduce tool and machine life, accelerate machine tool system component wear, and may lead to an unacceptable noise sound in the working environment. In this study, in order to moni색 of the chatter vibration on the cutting process, the behavior of spectral density of AE signal and principal cutting force signal has been investigated. Furthermore, its reliability from obtained the results has been studied to evaluate and confirm the proposed method with the application procedure and the experimental results.

• 한국생산제조학회지
• /
• 제7권2호
• /
• pp.91-99
• /
• 1998

This paper presents a methodology for identifying the cutter runout geometry in end milling process. Cutter runout is common but undesirable phenomenon in multi-tooth machining because it introduces variable chip loading to insert which results in a accelerated tool wear. amplification of force variation and hence enlargement vibration amplitude From understanding of chip load change kinematics, the analytical cutting force convolution model was formulated as the angular domain convolution model was formulated as the angular domain convolution of three dynamic cutting force component functions. By virtue of the convolution integration property, the frequency domain expression of the local cutting forces and the chip width density of the cutter. Experimental study is presented to validate the analytical model. This study provides the in-process monitoring and compensation of dynamic cutter runout to improve machining tolerance and surface quality for industrial application.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.318-321
• /
• 2005

The shell part is made of 2-layered blank because of functional requirements. To investigate the draw formability in this kind of part, the 2-layered sheet metal forming analysis process should be stipulated. First of all, treatment of contact with each blank must be considered to prevent the penetration on the each blank. Subsequently, applying the draw bead force is considered carefully because application of drawbead force for analysis is different with equivalent drawbead force. Formability as like crack, neck and wrinkles is estimated by FLD(Forming Limit Diagram) and thinning. A feasibility of the 2-layered sheet metal forming analysis process study is verified compare 2-layered sheet metal forming analysis with experimental results.

• 대한기계학회논문집A
• /
• 제20권12호
• /
• pp.3899-3908
• /
• 1996

In order to clarify the effects of nonmetallic inclusion contents insteels (SM45C & SCM440) on the tool life, cutting experiment was performed under various cutting conditions. Tool life, cutting force, roughness of machined surface and cutting mechanism are examined on these two kinds of steel. The following conclusions were obtained from the analysis (1) Cutting force of the steels was not affected by chemical component and nonmetallic inclusion. (2) If the rate of amount, Ca/S has a value grater than about 0.2 and addition of less amount of Al, Mn, tool wear of tips decreasesinturning. (3) It is also proved that higher contents of nonmetallic inclusion improve roughness of the surface. (4) Less amount of Ca, higher amount of S, Mn and Al improve the chip breakability.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.775-779
• /
• 2001

In optical disk drive (ODD), disk rotation speed has been increasing rapidly to achieve high data transfer rate. High servo bandwidths for focusing and tracking actuator are required to follow dynamic disturbance by high rotation speed in ODD. However, the servo bandwidth is significantly limited by some vibration modes which are induced by the flexibility of moving part. In this work, the vibration modes affecting bandwidth of actuators are suppressed by modifying actuating force by VCM. For this, the relation between the horizontal component of the actuating force and vibration mode is analyzed and force characteristic affecting to vibration mode is obtained through electromagnetic and structural analysis using simulation program.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제3권3호
• /
• pp.201-207
• /
• 2011

In this paper, we focused on computing the higher-harmonic components of the transmitted wave passing over a submerged circular cylinder to show that it is causing a horizontal negative drift force. As numerical models, a circular cylinder held fixed under free surface in deep water is adopted. As the submergence of a circular cylinder decreases and the incident wavelength becomes longer, the higher-harmonic components of the transmitted wave starts to increase. An increase of the higher-harmonic components of the transmitted wave makes the horizontal drift force be negative. It is also found that the higher-harmonic amplitudes averaged over the transmitted wave region become larger with the increase of wave steepness and wavelength as well as the decrease of submergence depth.

• Design & Manufacturing
• /
• 제13권1호
• /
• pp.36-41
• /
• 2019

A large plastic molding requires an injection molding with a large clamping force. However, it could not be prepared in the manufacturing at any time. In order to solve the problem, the injection molding analysis study was conducted on the back cover of 55 inch LED TV. The study compared the case of applying the existing flow system such as hot runner, the improvement of the hot runner lay-out and the precise control of the gate operation time, From the results of using the improved flow system, it was found that the welding and the clamping force were considerably improved as compared with before the improvement. In particular, the clamping force was reduced by 50% compared with before the improvement.

• Asian-Australasian Journal of Animal Sciences
• /
• 제22권4호
• /
• pp.520-527
• /
• 2009

Alfalfa (Medicago sativa L) is a high-quality forage for ruminants and the main stem is the dominant morphological component contributing to the forage nutritive value in mature alfalfa forage. Shearing force, a fracturing property of plant stem, is an important indictor of forage value. The objectives of this study were to investigate the effects of morphological characteristic on shearing force, the relationship between shearing force and chemical composition, and the relationship between shearing force and in situ digestibility of alfalfa stem. The results showed that linear density (weight per unit length of stem) was more important than chemical composition in affecting shearing force. There was a positive relationship between lignin content and shearing force (r = 0.78). Correlations were not found between shearing force and other chemical components such as neutral detergent fiber (NDF), acid detergent fiber (ADF), cellulose and hemicelluloses. In situ digestibility (of dry matter and NDF) was related to shearing force. A negative correlation was found between shearing force and dry matter (DM) digestibility (r = -0.70), and there was also a negative correlation between shearing force and NDF digestibility (r = -0.87). When shearing force was standardized for stem diameter or stem linear density, the relationship between shearing force and digestibility was consistent regardless of stem diameter and stem linear density. Shearing force was significantly correlated with lignin content and in situ digestibility (of DM and NDF), and was a more direct indicator for estimating forage nutritive value related to animal performance, so it can be used to predict the forage value of alfalfa.

• 대한토목학회논문집
• /
• 제29권1A호
• /
• pp.1-8
• /
• 2009

사장교에 사용되는 팽팽한 경사 케이블은 풍우현상에 의하여 진동에 쉽게 노출된다. 더욱이 보편적으로 알려진 풍우현상 이외의 이상현상에 의한 과도한 진동이 발생할 여지도 항상 존재한다. 급증한 동적변위는 케이블과 보호관에 과도한 인장력을 발생시키고 정착구와 댐퍼에 피로손상을 발생시키며 보강형의 설계에서 고려하지 않았던 추가적인 전단력 변화를 발생시킨다. 본 연구는 사장 케이블의 자유장에 발생된 동적변위에 의한 케이블의 동적장력 변화와 보강형의 전단력 변화를 분석 할 수 있는 해석적인 기법을 기술하고, 이로 인해 발생될 수 있는 사장교의 동적문제를 간략히 언급한다. 이것을 실현시키기 위해 사장 케이블이 진동하여 법선방향 변위를 발생시킬 때 나타나는 변화를 현방향 장력과 법선방향 장력으로 분리하여 물리적인 현상을 미분방정식으로 표현한 후 전개한 해를 풍우현상에 적용하여 케이블의 동적장력 변화와 보강형의 전단력 변화를 산정하였다. 주목할 것으로 CIP Recommendations(2002)에서 제시하는 방법론에 본 연구의 일부사항을 반영하여 산정하면 본 연구와 매우 유사한 결과를 제시하지만 CIP Recommendations에서 제시하는 방법론을 그대로 따라서 산정하면 10% 이상의 오차를 제시함을 확인하였다. 이것은 국제적으로 활용도가 매우 높은 설계지침에서 조차도 본 연구에서 논의하는 주제에 관한 조치가 없었음을 의미하는 것이다. 여기에 관한 검증은 사장 케이블의 진동형상을 만족하도록 외적하중을 재하시킨 탄성현수선 요소를 이용한 유한요소해석을 통하여 수행하였다.

• 한국정밀공학회지
• /
• 제30권5호
• /
• pp.520-528
• /
• 2013

A 20 mm diameter of small 5-D.O.F. force sensor has been developed for applications in MR-field Optical intensity modulation was adopted for transducing to miniaturize the sensor structure. For its accurate sensing of 5-D.O.F. force/moment, the elastic detecting module was designed to respond independently to each force or moment component. And for small size, two optical transducing modules of 2-D.O.F. and 3-D.O.F. were designed and integrated with the detecting module where optical fibers were arranged in parallel to make the sensor small. It is confirmed by calibration test that the detecting modules deforms linearly and independently to the input force. The results of evaluating test show that the range and resolution of forces are ${\pm}4$ N and 0.94~7.1 mN and the range and resolution of moments are ${\pm}120N{\cdot}mm$ and $0.023{\sim}0.034N{\cdot}mm$.