• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.50 no.3
• /
• pp.130-135
• /
• 2001

In this paper, an observer-based adaptive controller is proposed to control the longitudinal motion of vehicles. The standard gradient method will be used to estimate the vehicle parameters, mass, time constant, etc. The nonlinear model between the driving force and the vehicle acceleration will be chosen to design the state observer for the vehicle velocity and acceleration. It will be shown that the proposed observer is exponentially stable, and that the adaptive controller proposed on this paper is stable. It will be proved that the errors of the relative distance, velocity and acceleration converge to zero asymptotically fast, and that the overall system is also asymptotically stable. The simulation results are presented to investigate the effectiveness of the proposed method.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.52 no.6
• /
• pp.342-350
• /
• 2003

In this paper, a levitation controller for a magnetic levitation(MagLev) system is designed and implemented. The target to be controlled is PEM(permanent and electromagnet) type with 4-corners levitation which is open-loop unstable, highly non-linear and time-varying system. The digital control system consists of a VME-based CPU board, AD board, PU board, 4-Quadrant chopper, and gap sensor, accelerometer as feedback sensors. In order to estimate the velocity of the magnet, we used 2nd-order state observer with acceleration and gap signal as input and output, respectively. Using the estimated states, a state feedback control law for the plant is designed and the feedback gains are selected by using the pole-placement method. The designed controller is experimentally validated by step-type gap reference change and force disturbance test.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.6
• /
• pp.486-494
• /
• 2004

This paper addresses the dynamic modeling and closed-loop eigenvibration analysis of composite rotating pretwisted fan blade modeled as non-uniform thin-walled beam with bi-convex cross-section fixed at the certain presetting angle and incorporating piezoelectric induced damping capabilities. The blade model incorporates non-classical features such as transverse shear, rotary inertia and includes the centrifugal and Coriolis force field. A velocity feedback control law relating the piezoelectiriccally induced transversal bending moment at the beam tip with the appropriately selected kinematical response quantity is used and the beneficial effects upon the closed loop eigenvibration of the blade are highlighted.

• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.596-599
• /
• 2000

A natural admittance control system design is presented for a particular type of interaction controller that achieve high-performance and guarantees stability. The admittance control Significantly improves performance when Coulomb friction is present in the one link robot system. The technique requires a careful choice of the target impedance. Experimental performance results are presented for a two-mass system with internal Coulomb friction. Results demonstrate that the admittance control law is successful in rejecting internal Coulomb friction force disturbances. The controller was designed and implemented on our system that we set up one link robot system and hardware configuration system, and performance results are presented.

• Smart Structures and Systems
• /
• v.10 no.6
• /
• pp.573-591
• /
• 2012

In this study, a procedure to design an optimal LCVA that maximizes the equivalent damping ratio added to the primary structure subjected to along-wind excitation is proposed. That design procedure does not only consider the natural frequency and damping ratio of the LCVA, but also the proportion of the U-shaped liquid, which is closely related to the participation ratio of the liquid mass in inertial force. In addition, constraints to ensure the U-shape of the liquid are considered in the design process, so that suboptimal solutions that violate the optimal tuning law partly are adopted as a candidate of the optimal LCVA. The proposed design procedure of the LCVA is applied to the control of the 76-story benchmark building, and the optimal proportions of the liquid shape under various design conditions are compared.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.3
• /
• pp.275-284
• /
• 2012

This paper proposes an attitude and direction control of a single wheel balanced robot. A unicycle robot is controlled by two independent control laws: the mobile inverted pendulum control method for pitch axis and the reaction wheel pendulum control method for roll axis. It is assumed that both roll dynamics and pitch dynamics are decoupled. Therefore the roll and pitch dynamics are obtained independently considering the interaction as disturbances to each other. Each control law is implemented by a controller separately. The unicycle robot has two DC motors to drive the disk for roll and to drive the wheel for pitch. Since there is no force to change the yaw direction, the present paper proposes a method for changing the yaw direction. The angle data are obtained by a fusion of a gyro sensor and an accelerometer. Experimental results show the performance of the controller and verify the effectiveness of the proposed control algorithm.

• Smart Structures and Systems
• /
• v.8 no.5
• /
• pp.501-524
• /
• 2011

Recent studies have discovered that a conventional passive isolation system may suffer from an excessive isolator displacement when subjected to a near-fault earthquake that usually has a long-period velocity pulse waveform. Semi-active isolation using variable friction dampers (VFD), which requires a suitable control law, may provide a solution to this problem. To control the VFD in a semi-active isolation system more efficiently, this paper investigates experimentally the possible use of a control law whose control logic is similar to that of the anti-lock braking systems (ABS) widely used in the automobile industry. This ABS-type controller has the advantages of being simple and easily implemented, because it only requires the measurement of the isolation-layer velocity and does not require system modeling for gain design. Most importantly, it does not interfere with the isolation period, which usually decides the isolation efficiency. In order to verify its feasibility and effectiveness, the ABS-type controller was implemented on a variable-friction isolation system whose slip force is regulated by an embedded piezoelectric actuator, and a seismic simulation test was conducted for this isolation system. The experimental results demonstrate that, as compared to a passive isolation system with various levels of added damping, the semi-active isolation system using the ABS-type controller has the better overall performance when both the far-field and the near-fault earthquakes with different PGA levels are considered.

• Korea Trade Review
• /
• v.41 no.3
• /
• pp.157-176
• /
• 2016

This study is to investigate Trademark Prior Use Defence of prior use party under Trademark Law of the People's Republic of China. Chinese Trademark Law was amended for the third time and this Law shall enter into force on 1 May 2014. This third amendment introduced Prior Use Defence Right of Trademark for the first time. Article 59(3) gives the right to the prior use party for the continuous use of such trademark under the condition that first, an identical or similar trademark has been used in connection with the same goods or similar goods by others before the registrant's application, second, such trademark should have a certain influence in certain market, and third, such aforesaid trademark should be used within the original scope continuously. Then the exclusive right holder of said registered trademark shall have no right to prohibit others from continuous use of such trademark. Korean companies should be aware that it is almost impossible to search prior use trademark before a dispute arises, since the prior use trademark has never been registered. The best way to control the prior use trademark is to superintend aforesaid trademark for the use within the original scope.

• Transactions on Control, Automation and Systems Engineering
• /
• v.3 no.2
• /
• pp.117-123
• /
• 2001

To improve control performance of a non-linear system, many other reserches have used the sliding model control algorithm. The sliding mode controller is known to be robust against nonlinear and unmodeled dynamic terms. However, this algorithm raises the inherent chattering caused by excessive switching inputs around the sliding surface. Therefore, in order to solve the chattering problem and improve control performance, this study has developed the sliding mode controller with a perturbation estimator using the observer-based fuzzy adaptive network. The perturbation estimator based on the fuzzy adaptive network generates the control input of compensating unmodeled dynamics terms and disturbance. And the weighting parameters of the fuzzy adaptive network are updated on-line by adaptive law in order to force the estimation errors converge to zero. Therefore, the combination of sliding mode control and fuzzy adaptive network gives rise to the robust and intelligent routine. For evaluation control performance of the proposed approach, tracking control simulation is carried is carried out for the hydraulic motion simulator which is a 6-degree of freedom parallel manipulator.

• Journal of Ocean Engineering and Technology
• /
• v.22 no.3
• /
• pp.34-40
• /
• 2008

his study discusses the design of an automatic berthing control algorithm for ships with a haw thruster and a stern thruster, as well as a rudder. A nonlinear mathematical model for the law speed maneuvering of ships was used to design a MIMO (multi-input multi-output) nonlinear control algorithm. The algorithm consists of two parts, the forward velocity control and heading angle control. The control algorithm was designed based on the longitudinal and yaw dynamic models of ships. The desired heading angle was obtained by the so-called "Line of Sight" method. An optimal control force allocation method forthe rudder and the thrusters is suggested. The nonlinear control algorithm was tested by numerical simulations using MATLAB, and showed good tracking performance.