• Smart Structures and Systems
• /
• 제31권1호
• /
• pp.69-78
• /
• 2023

The purpose of this paper is to develop a scalable grey predictive controller with unavoidable random delays. Grey prediction is proposed to solve problems caused by incorrect parameter selection and to eliminate the effects of dynamic coupling between degrees of freedom (DOFs) in nonlinear systems. To address the stability problem, this study develops an improved gray-predictive adaptive fuzzy controller, which can not only solve the implementation problem by determining the stability of the system, but also apply the Linear Matrix Inequality (LMI) law to calculate Fuzzy change parameters. Fuzzy logic controllers manipulate robotic systems to improve their control performance. The stability is proved using Lyapunov stability theorem. In this article, the authors compare different controllers and the proposed predictive controller can significantly reduce the vibration of offshore platforms while keeping the required control force within an ideal small range. This paper presents a robust fuzzy control design that uses a model-based approach to overcome the effects of modeling errors. To guarantee the asymptotic stability of large nonlinear systems with multiple lags, the stability criterion is derived from the direct Lyapunov method. Based on this criterion and a distributed control system, a set of model-based fuzzy controllers is synthesized to stabilize large-scale nonlinear systems with multiple delays.

• 무역상무연구
• /
• 제60권
• /
• pp.3-26
• /
• 2013

Seller's obligation on the Delivery of Goods and Handing over the Documents are key elements in Contracts for the International Sale of Goods. The United Nations Convention on Contracts for the International Sale of Goods(CISG) has been entered into force on 1 January 1988 to create international certainty and uniformity in the law and to govern issues that arise in an international sale of goods transaction. The Incoterms were first published by the ICC in 1936 and were most recently revised in 2010. Incoterms 2010 are entering into force on 1 January 2011. The Incoterms focus on the seller's delivery obligations and reflect the principle that the risk of loss or damage to the goods passes from the seller to the buyer when the seller has fulfilled its obligations to deliver the goods. This study highlights basic rules covering seller's obligation of delivery of goods and handing over the documents under the Incoterms 2010 and the United Nations Convention and Contracts for the International Sale of Goods. In the second chapter, this study will provide analyses and compare these two legal systems in relation to the basic rules governing delivery of goods and passing of risks in contract of sale. This chapter evaluates the meaning of Article 31 and Article 67(1) and FOB, CFR, CIF & FCA, CPT, CIP terms of Incoterms 2010. Chapter Three will focus on handing over the documents. Article 30 CISG imposes the seller's primary obligations to deliver the goods and to hand over documents relating to them. Article 34 CISG supplements the seller's obligation in relation to documents by providing that the seller must hand over documents relating to the goods. In contrast, Article 58(1) CISG imposes on the buyer the obligation to pay only when it has received the goods or documents controlling their disposition. I reviewed only some of the documents relating to the goods are documents controlling their disposition. This chapter considers the meaning of the phrase "documents that control the disposition of the goods and do not control disposition of the goods." Finally, the fourth chapter will assess the meaning of rules of CISG and Incoterms 2010.

• 항공우주시스템공학회지
• /
• 제3권1호
• /
• pp.36-41
• /
• 2009

Quad-rotor is one kind of a rotorcraft in Unmanned Aerial Vehicle (UAV), which consists of four rotors in total and fixed-pitch blades located at the four corners. This vehicle is emerging as popular platform for UAV research due to the simplicity of its construction, the ability of hovering and the vertical take-off and landing (VTOL) capability, etc. Because of those specific capabilities, this vehicle can be applied to many fields: search and rescue, mobile sensor networks, fire observation, etc. However a quad-rotor is much affected by the disturbance due to the characteristics of structure. So this vehicle needs attitude control for stabilizing. In this paper, we design the control law for automatic stabilization. The PID controller is used to control a brushless DC motor. And an accelerometer is used to measure the roll and pitch angles of a quad-rotor.

• Structural Engineering and Mechanics
• /
• 제89권4호
• /
• pp.383-397
• /
• 2024

To improve the vibration control performance and applicability of traditional particle tuned mass damper (PTMD) and realize the significant characteristic of lightweight design, this study proposes a novel particle tuned mass inerter system (PTMIS) by introducing inerter system (IS) to the PTMD. In the study, the motion equation of single degree of freedom (SDOF) structure attached with PTMIS is established first, then the variation law of the system's vibration reduction performance (VRP) is discussed through parameter analysis, and it is compared with the PTMD to analyze its VRP advantages. Finally, its vibration reduction (VR) mechanism from the perspective of core control force and energy analysis is explored, and its cavity relative displacement from the application perspective is analyzed. The results show that the PTMIS can remarkably improve the vibration control effectiveness of the PTMD. The reason is that the inerter can store energy and transfer the energy to the cavity and particles, which further stimulates the interaction between the two parts, thereby improving the nonlinear energy consumption effectiveness. Also, the IS can amplify the damping element's energy dissipation efficiency. In addition, the PTMIS can effectively reduce the working stroke of the PTMD, and through the analysis of the lightweight characteristics of the PTMIS, it is found that its lightweight advantage can reach nearly 100%.

• 동의생리병리학회지
• /
• 제19권2호
• /
• pp.490-494
• /
• 2005

The purpose of this was investigate the possibility of medicinal plants application as an edible functional food resources. We arried out to develop a beverage by using Nelumbo nucifera and we examined the nutritional characterics. Also we examined the effects of drink on physiological function in aorta relation. Thus, the effect of developed beverage on phenylephrine induced contraction of isolated rat thoracic aorta. Contractile force was measured with force displacement thansducer under 1.5g loading tension. Brix, pH and titratable acidity of developed drink were 12.25%, 4.5 and 0.092%. The approximate nutritional composition of beverage was carbohydrate, 9.40%, crude protein, 0.30%, crude fat, 0.25% and ash, 0.15%. Also insoluble fiber and soluble fiber were 1.30%, 0.80%. Developed beverage contained Na(11.45 mg%), K(6.87 mg%), Ca(2.53 mg%). The contraction forces by injection of phenylephrine in isolated thoracic aorta were significantly law in each beverage treatment groups compared with control group. These results that developed drink with medicinal plants can be used as a functional material to decrease aorta contraction.

• 한국산학기술학회논문지
• /
• 제5권3호
• /
• pp.266-272
• /
• 2004

본 논문에서는 주행 차량의 직진운동 제어를 위하여 관측자를 이용한 적응제어기를 제안한다. 차체중량, 시정수 등의 차량 파라미터들을 추정하기 위해 표준형 적응칙을 이용한다. 차량의 구동력 입력에서 가속도 까지의 비선형 모델을 이용하여 차량주행 속도 및 가속도 관측자를 설계한다. 제안한 관측자의 지수함수적인 안정도 및 관측자에 의거하여 설계한 적응제어기의 안정도를 리아프노브 함수 후보에 의해 입증한다. 전체 시스템의 안정도 및 차차간 상대거리/속도/가속도 오차들의 점근적인 수렴성도 수학적으로 입증하며, 제안한 방법의 타당성 및 효율성을 시뮬레이션을 통해 검증한다.

• 보건행정학회지
• /
• 제26권4호
• /
• pp.279-288
• /
• 2016

Graphic health warning on the tobacco product package is a cost-effective tobacco control policy to convey information on harmful effect of tobacco use to health, and it is known not only to motivate smokers to quit but also to deter adolescents from start smoking. In case of Korea, amendments to National Health Promotion Act requiring implementation of graphic health warning had been submitted 13 times, from 2002 to May 2015. In May 2015, the amendment had been approved by the National Assembly and it enters into force on December 23, 2016. This research analyzed the discussions from Health and Welfare Committee of the National Assembly during the implementation of the graphic health warning in order to study decision making process of legislators. Study found that there was a shift from a general opposition on implementing graphic health warning at first to a harsh conflict over relaxation of the regulation once discussing the implementation in earnest. Particularly, while the group supporting the implementation of the graphic health warning or opposing relaxation advocated the amendment with scientific and knowledge-based evidences including the World Health Organization Framework Convention on Tobacco Control, the group opposing the adoption of the amendment itself or suggesting relaxation tended to defend their position with empathy on smokers or tobacco industries.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회논문집(II)
• /
• pp.525-530
• /
• 1998

The objective of this experiment is to observe the elastic and inelastic behaviors of high-rise reinforced concrete frames with nonseimic details. To do this, a building frame designed according to Korean seismic code and detailed in the Korean conventional manner was selected. An 1:12 scale plane frame model was manufactured according law. Reversed lateral load tests and monotonic push-over test were performed under the displacement control. To simulate the earthquake effect, the lateral force distribution was maintained to be an inversed triangular by using whiffle tree. From the tests, story displacements, lateral story forces, local plastic rotations and the relations between inter-story drift versus story shear are obtained. Based on the test results, conclusions on the characteristics of the elastic and behaviors of a high-rise reinforced concrete frame with nonseismic details are drawn.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.513-518
• /
• 1999

The objective of this experiment is to observe the elastic and inelastic behaviors of high-rise reinforced concrete frame with infilled masonry. To do this a building frame designed according to Korean seismic code and detailed in the Korean conventional manner was selected. An 1:12 scale plane masonry-infilled frame model was manufactured according to similitude law. Push-over test were performed under the roof displacement control. To simulate the earthquake effect, the lateral force distribution was maintained to be an inversed triangular by using whiffle tree. From the tests, story displacements, lateral story forces, local plastic rotations and the relations between inter-story drift versus story shear are obtained. Based on the test results, conclusions on the characteristics of the elastic and inelastic behaviors of a high-rise reinforced concrete frame with infilled masonry are drawn.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.87-90
• /
• 2002

Computational study has been undertaken to investigate the aerodynamic influence of side jet on a supersonic missile and to find a similarity condition between the flight condition and the wind tunnel testing. Tasks were performed to validate the existing Raytheon test body with side jet, to simulate the flow inside the supersonic wind tunnel, and to compare the flow fields between the missile in free flight and that in the wind tunnel. Then sub-scale model of body-tail configuration was analyzed to estimate the influence of the side jet on the missile components. It Is found that the influence of side Jet is not as significant on the tail region as on the body surface and a simple algebraic formula for aerodynamic coefficients accounting for the side jet as a point force may be cautiously utilized in setting up control logic.