• Journal of Animal Environmental Science
• /
• v.18 no.3
• /
• pp.257-266
• /
• 2012

Near infrared reflectance spectroscopy (NIRS) has become increasingly used as a rapid, accurate method of evaluating some chemical constituents in cereal and dired animal forages. Analysis of forage quality by NIRS usually involves dry grinding samples. Costs might be reduced if samples could be analyzed without drying or grinding. The objective of this study was to investigate effect of sample preparations on prediction ability of chemical composition and fermentation parameter for Italian ryegrass silages by NIRS. A population of 147 Italian ryegrass silages representing a wide range in chemical parameters were used in this investigation. Samples were scanned at 1nm intervals over the wavelength range 680-2500 nm and the optical data recorded as log 1/Reflectance (log 1/R) and scanned in oven-dried grinding and fresh ungrinding condition. The spectral data were regressed against a range of chemical parameters using partial least squares (PLS) multivariate analysis in conjunction with four spectral math treatments to reduced the effect of extraneous noise. The optimum calibrations were selected on the basis of minimizing the standard error of cross validation (SECV) and maximizing the correlation coefficient of cross validation (${R^2}_{CV}$). The results of this study show that NIRS predicted the chemical parameters with high degree of accuracy in oven-dried grinding treatment except for moisture contents. Prediction accuracy of the moisture contents was better for fresh ungrinding treatment (SECV 1.37%, $R^2$ 0.96) than for oven-dried grinding treatments (SECV 4.31%, $R^2$ 0.68). Although the statistical indexes for accuracy of the prediction were the lower in fresh ungrinding treatment, fresh treatment may be acceptable when processing is costly or when some changes in component due to the processing are expected. Results of this experiment showed the possibility of NIRS method to predict the chemical composition and fermentation parameter of Italian ryegrass silages as routine analysis method in feeding value evaluation and for farmer advice.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.31 no.1
• /
• pp.75-84
• /
• 2011

This study was conducted to investigate the effect of harvest stage of corn on the quality of square baled corn silage manufactured with corn grown in paddy land of Department of Animal Resources Development, National Institute of Animal Science, RDA from 2009 to 2010. Corn "Kwangpyungok" was harvested at three different growth stages (milk, yellow ripen and ripen stage) and ensiled at each harvest time. Square baled corn silage was manufactured by use of square silage wrapping compressor. Each treatment was replicated three times. The content of crude protein (CP) of corn in square baled corn silage decreased with delayed maturity, but the content of ADF (acid detergent fiber), NDF (neutral detergent fiber), TDN (total digestible nutrient) and in vitro dry matter digestibility (IVDMD) were not changed. The content of moisture, pH and the nutritive values at three different harvest stages were not influenced by the method of silage manufacture and inoculant. The content of lactate of square baled corn silage harvested in milk stage of corn was significantly increased, as compared with that of round baled corn silage (P<0.05), but in stage of yellow ripen was significantly decreased (P<0.05). The content of acetate in square baled corn silage significantly decreased with delayed harvest maturity, as compared with that of round baled corn silage (P<0.05). Flieg's score of square baled corn silage harvested in milk stage of corn was slightly higher than that of round baled corn silage, but Flieg's scores in yellow ripen stage and ripen stage were not influenced by the method of silage manufacture. Flieg's score with delayed maturity was not influenced by the method of silage manufacture and inoculant. The manufacture of square baled corn silage was proved to be suitable for the fermentation of corn silage. Therefore, this study suggest that square baled corn silage can be a way of new silage manufacture technique.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.25 no.1
• /
• pp.43-50
• /
• 2005

The purpose of this study is to discuss the ways to consistently feed high quality corn silage(CS). This study evaluated the effect of the corn silage, after a certain time has elapsed, on the chemical composition and fermentation characteristics after feedout during the winter feeding period of the CS. Six samples of CS from four dairy farms(E1, E2, E3, and L1 ) were taken in order to feed the milking cows over a winter feeding Period from November of 2002 until February of the following year, 2003(six samples were taken at the fellowing dates in the following order: sample one was taken on the 23rd Nov. 2002, sample two on the 5th of Dec. 2002, 3rd sample on the 23rd of Dec. 2002, 4th sample on the 7th of Jan. 2003, 5th sample on the 22nd of Jan. 2003, and the 6th sampling was carried out on the 6th of Feb. 2003) at the three sampling sites after the opening of the trench silos at intervals of 15 days. In the dry matter contents of CS, there wasn't any specific tendency according to the elapsed time in the range of 21.3~$27.3\%$ at all low dairy farm(E1, E2, E3, and L1). And the average dry matter contents were 24.1, 25.9, 23.6, and $20.4\%$. Considering the Proper amount of the dry matter of CS during the ripen yellow stage, the appropriate moisture content was $33\%$ (NRC, 1989), and these dry matter contents were all low. A consistent tendency was not found in the contents of CS. The average of CP contents were 10.2, 8.0, 8.5, and $9.8\%$ at the E1, E2, E3, and L1 farms, and there were significant differences. The TDN contents of CS were not different among forms according to the time elapsed. The pH, according to the time elapsed after opening of the CS, there were no differences at each of E1, E2, E3, md L1 farms. Average pH were 3.5, 3.9, 3.6, and 4.1, md all of them were in normal range. In the lactic acid contents of CS, a consistent tendency was not found among four farms. But according to the time elapsed. there was a goat difference from 1.13~$7.8\%$ The acetate, propionate, and butyrate contents of CS were very low. In this study, there was no significant difference in the CS's chemical composition and fermentation characteristics according to the elapsed time at all four dairy farms. Considering the proper dry matter contents of CS during the ripen yellow stage, the appropriate dry matter content was $33\%$, and dry matter contents of few farms were all low. To enhance the quality of corn silage should be ensiled com at proper dry matter content range from 28 to $35\%$ Therefore, content of the corn plant should be always be closely monitored prior to beginning harvest.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.29 no.1
• /
• pp.73-82
• /
• 2009

The experiment was carried out from January through December in 2008 at Chungnam National University and the Unbong Animal Genetic Resources Station, NIAS. The experimental animals were twelve dairy goats (female, $30{\pm}1.8kg$), twelve Korean native Boats(female, $24{\pm}2.4kg$) and five sika deer(female, $92{\pm}5.2kg$). A total of 11 different types of hay and straw were tested in this study: such straw imported from USA in 2006 as annual ryegrass, perennial ryegrass, tall fescue and Kentucky bluegrass, and such hay imported from USA in 2007 as alfatfa, bermudagrass, timothy, kleingrass, oat and orchardgrass, and such domestic hay as mixed hay There were significant differences in chemical composition and in vitro dry matter digestibility (IVDMD) among the various types of imported hay and straw (p<0.05). Besides alfalfa hay and orchardpass hay all of the imported hay contained lower crude protein (CP) and IVDMD but contained higher neutral detergent fiber(NDF) and acid detergent fiber (ADF) than the domestic hay. According to the kinds of the imported hay, relative feed value (RFV) made the difference and the hay grades were ranged from 4 to 5, based on the RFV. According to the kinds of the imported hay, there were markedly differences in dry matte. (DM) intake and palatability ranking among dairy goats, Korean native goats, and sika deer. DM intake and palatability ranking were high in common between orchardgrass hay and bermudagrass hay, but Kentucky bluegrass straw, tall fescue straw, perennial ryegrass straw and annual ryegrass straw were proved to be very low in DM intake and palatability ranking. In conclusion, the quality and palatability among the imported hay that was tested in the study were quite variable and lower than expected. It is required to establish a better feed evaluation system for the imported hay.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.37 no.4
• /
• pp.264-270
• /
• 2017

This study was carried out to investigate the optimal harvesting time, feed value and fermentation quality of barley and wheat for the making of chopped whole crop silage substitute for formula feed. As a result, the moisture content of barley and wheat decreased with a late harvest, and barley progressed faster than wheat. The plant height was similar with harvesting time, and the number of spikes decreased with prolonged period after heading. The dry matter yield and TDN yield of barley harvested at 35 and 40 days after heading were significantly higher than those at 30 days after heading and wheat was significantly higher at 40 and 45 days than at 35 day after heading(p<0.05). Crude protein content of barley and wheat were increased with later harvesting time, and crude fiber, crude fat and crude ash were slightly decreased, but not statistically significant. NDF and ADF content of barley decreased with later harvesting time, and those showed similar level in wheat. TDN content of barely was slightly increased but there was no difference in wheat. Comparing the effects of fermentation on feed value of chopped whole crop silage, the approximate compositions were slightly increased after fermentation, but the difference was not significant. Fermentations resulted in increasing the pH value of barley silage with late harvesting time, but decreasing the lactic acid content(p<0.05). A pH value of wheat silage showed similar level in different harvest time, and lactic acid content was decreased. Considering the quantity and quality of fermentation, barley and wheat can be used for making chopped silage of whole crop silage when they were harvested at 35 days and 40~45 days after heading, respectively.

• Journal of Animal Science and Technology
• /
• v.55 no.3
• /
• pp.219-227
• /
• 2013

This study was conducted to elucidate the characteristics of equine meat traits and to evaluate the utilization of dried-citrus pulp abundantly produced in Jeju Island as feed ingredient in the diet of finished meat horses. Treatment groups consisted of wheat bran (A) and the dried-pellet mixture of citrus pulp (20%) and wheat bran (80%) (B). Feeding of agricultural by-products were 2 times in a day at the level of 1.5% of body weights. Water and dried-grass forage was not restricted. The average daily gain was similar in both groups. Feed conversion of treatment B showed lower level than that of A. Carcass rate of B was relatively lower than that of A, but meat yield grade of B was higher than that of A. For meat color traits, $L^*$ of B was lighter than that of A, and $b^*$ of group B was lower than that of group A. From the analysis of physical characteristics of equine meats, shearing force had decreased in the treatment B but the levels of drip loss and water holding cavity had increased in the treatment B compared to A. The level of crude fat is lower in the treatment B than the treatment A. For the mineral contents, the treatment B showed higher levels of Ca, K, Mg, Cu and Mn than that of A. For the fatty acid contents, the treatment B showed increased levels of stearic acid, oleic acid, eicosenoic acid, and arachidonic acid compared to A. Consequently, these results suggested that dried-citrus pulp might be utilized as replacement material for equine forage. Please rewrite the whole abstract and should include all required information. Before resubmission, please check it again from a native colleague in your group.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.24 no.2
• /
• pp.145-154
• /
• 2004

The objective of this experiment was to suggest the optimum cutting height for turf type mixtures{Kentucky bluegrass(Newport) 40％ + tall fescue(Rebell Jr) 20％ + perennial ryegrass (Palmer Ⅱ) 10% + redtop(Barricuda) 10％ + red fescue(Salem) 10% + creeping bentgrass(Crenshaw) IO%}. The fields trials were conducted from 1998 to 2001 at Chungnam National University in order to evaluate the dry matter yield and quality on the cutting heights(3, 4, and 5cm). With increasing the cutting height, the average DM yields of turf type mixtures over 3-year significantly increased, therefore the average total DM yields were obtained 11,158, 12,143 and 13,181㎏/ha at cutting height 3, 4 and 5cm(p<0.05), respectively. The CP content and OMO decreased(p<0.05), whereas the fiber contents slightly increased with increasing the cutting height. The average CPDM and DDM yields were obtained 2,012 and 8,621㎏, 2,097 and 9,461㎏, and 2,298 and 9,951㎏ at cutting height 3, 4, and 5㎝(p<0.05), respectively. The botanical compositions of Kentucky bluegrass and tall fescue were maintained high as 30 ∼ 36％, but that of perennial ryegrass was maintained low as 10-15%. Most of other species were low, but redtop and creeping bentgrass among the other species made up 8∼10％ and 7 ∼ 8% of botanical composition at the last 6th cutting time in 2001, respectively. In general, the level of cutting height of turf type mixtures was not more closely associated with botanical composition. The results of this experiment indicated that a 5㎝ of cutting height of turf type mixtures sown by extensive method would seemed adequate.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.5 no.3
• /
• pp.187-194
• /
• 1985

This field experiment was carried out to determine the effects of thirteen different fertilizer levels of nitrogen(N), phosphorus($P_2O_5$) and potassium($K_2O$) on the content of crude protein, crude fiber, mineral constituents of product and tree growth forest pasture with 40-50% shading. The experiment was arranged as a randomized block design and performed in the suburban forest of Suweon in 1984. The results obtained are summarized as follows: 1. Crude protein content and total protein yield were higher in the plot of 28 and 42kg $N/_{10a}$, regardless of $P_2O_5\;and\;K_2O$ level, while those were the lowest in zero fertilizer and N-zero fertilizer plots. 2. The contents of lignin and silica were significantly low in the high N fertilizer level, and the contents of NDF, ADF, cellulose and hemicellulose were not affected by different fertilizer levels. However, the content of crude fiber tended to be low with high N, regardless of $P_2O_5\;and\;K_2O$. 3. The contents of N,K and $SiO_2$ of grasses were influenced by different fertilizer levels. However, those of P,Ca,Ma and Na showed little differences. 4. The recovery percentage of NPK was higher in the plot of standard fertilizer level with 28-20-24 kg/10a, and higher recovery percentage was observed in $K_2O$, followed by N and $P_2O_5$ in that order. 5. The growth of tree was increased as the level of N fertilizer was increased, but no such trend was noted by $P_2O_5\;and\;K_2O$ levels. 6. Crude protein, crude fiber, some mineral contituents of grasses, and growth of tree were influenced by N level, regardless of $P_2O_5\;and\;K_2O$. And the optimum fertilizer level of $N-P_2O_5-K_2O$ seemed to be 28-20-24 kg/10a for the production of grasses with higher quality and more yield in the forest.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.36 no.1
• /
• pp.50-57
• /
• 2016

This study was conducted to determine the effect of mathematical transformation on near infrared spectroscopy (NIRS) calibrations for the prediction of chemical composition and fermentation parameters in corn silage. Corn silage samples (n=407) were collected from cattle farms and feed companies in Korea between 2014 and 2015. Samples of silage were scanned at 1 nm intervals over the wavelength range of 680~2,500 nm. The optical data were recorded as log 1/Reflectance (log 1/R) and scanned in intact fresh condition. The spectral data were regressed against a range of chemical parameters using partial least squares (PLS) multivariate analysis in conjunction with several spectral math treatments to reduce the effect of extraneous noise. The optimum calibrations were selected based on the highest coefficients of determination in cross validation ($R^2{_{cv}}$) and the lowest standard error of cross validation (SECV). Results of this study revealed that the NIRS method could be used to predict chemical constituents accurately (correlation coefficient of cross validation, $R^2{_{cv}}$, ranging from 0.77 to 0.91). The best mathematical treatment for moisture and crude protein (CP) was first-order derivatives (1, 16, 16, and 1, 4, 4), whereas the best mathematical treatment for neutral detergent fiber (NDF) and acid detergent fiber (ADF) was 2, 16, 16. The calibration models for fermentation parameters had lower predictive accuracy than chemical constituents. However, pH and lactic acids were predicted with considerable accuracy ($R^2{_{cv}}$ 0.74 to 0.77). The best mathematical treatment for them was 1, 8, 8 and 2, 16, 16, respectively. Results of this experiment demonstrate that it is possible to use NIRS method to predict the chemical composition and fermentation quality of fresh corn silages as a routine analysis method for feeding value evaluation to give advice to farmers.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.36 no.1
• /
• pp.7-14
• /
• 2016

The objective of this study was to determine the effect of bacterial inoculation (Lactobacillus plantarum or combo inoculant mixed with Lactobacillus plantarum and Lactobacillus buchneri) and addition of fibrolytic enzyme on chemical compositions and fermentation characteristics of whole crop barley (WCB) and triticale (TRT) silage, their ruminal in vitro fermentation, and digestibility. In TRT silage, enzyme addition significantly (p<0.01) decreased NDF content compared to no enzyme addition treatment. Organic acids such as lactate and acetate contents in WCB and TRT silages were significantly (p<0.01) higher compared to those in the control. Particularly, lactate content was the highest in L. plantarum treatment. Fibrolytic enzyme treatment on both silages had relatively higher lactic acid bacteria content, while mold content was lower in both treatments compared to that in the control. In vitro dry matter digestibility was generally improved in WCB silages. It was higher (p<0.01) in TRT with mixed treatment of L. plantarum, L. buchneri, and enzyme compared to others. In vitro ruminal acetate production was relatively higher in treatments with both enzyme and inoculant additions compared to that in the control. Therefore, the quality of silage and rumen fermentation could be improved by inoculants (L. plantarum and L. buchneri) regardless whether whole crop barley (WCB) or triticale (TRT) silage was used. Although it was found that fibrolytic enzyme addition to both silages had various quality and rumen fermentation values, further study is needed.