• Korean Journal of Applied Biomechanics
• /
• v.24 no.1
• /
• pp.51-57
• /
• 2014

The purpose of this study was to compare and analyze kinetic variables of lower limbs according to types of ankle taping in drop landing. For this, targeting seven male basketball players (average age: $20.8{\pm}0.74yrs$, average height: $187.4{\pm}3.92cm$, average weight: $79.8{\pm}7.62kg$) with no instability of ankle joints, the drop landing motion was conducted according to three types of inelastic taping (C-type), elastic taping (K-type), and no treatment (N-taping). Based on the result, the next conclusion was reached. First, the effect of taping for the players with stable ankles was minimal and the high load on ankle joints offset the fixing effect of inelastic taping. Thus the inelastic taping for the players with stable ankles did not have an effect on the control of dorsal flexion during one-foot landing. Second, increasing angular velocity by increasing the movable range of knee joints disperses impact forces, yet inelastic taping restricted the range of knee joint motion and at the same time increased angular velocity, adding to a negative effect on knee joints. Third, inelastic taping induced inefficient motion of Lower limbs and unstable impact force control of ankle joints at the moment of landing and produced maximum vertical ground reaction force, which led to an increase of load. Therefore, inelastic ankle taping of players whose jump actions occur very often should be reconsidered. Also, it is thought that this study has a great meaning in proving the problem of inelastic taping related to knee pain with unknown causes.

• The Journal of the Korea Contents Association
• /
• v.9 no.12
• /
• pp.364-375
• /
• 2009

The purpose of this study is to offer basic data for the fall prevention by analyzing the kinematic difference between the lower limb joints and the lower extremities in elderly people's walking given the lower-limb resistance exercises. For this, three-dimensional image analysis was carried out by selecting 7 elderly women from over 70s to under 80 years old. To obtain the three-dimensional location coordinates in the lower limb joints and the lower extremities, it shot with 100Hz/s by using MCU(Qualisys, Sweden) camera. The shot image gained raw data on the location coordinates by using QTM(Qualisys, Sweden). As a result of calculating three-dimensional angle by using program of Matlab 6.5, the following conclusions were obtained. Flexion and extension in the thigh and the lower-leg extremities were indicated to be big in motion of flexion after exercising at E5. Foot segment indicated statistical difference while showing eversion at E4. Knee joints showed flexion at E4 after exercising. Ankle joints showed statistical difference while indicating motion in inversion at E3 and in eversion at E4(p<.05).

• Korean Journal of Applied Biomechanics
• /
• v.13 no.2
• /
• pp.49-63
• /
• 2003

For this study, four male university Taekwondo players were randomly chosen, between the weight categories of 60Kg and 80Kg. Their side kicks (yeop chagi), which are part of foot techniques, were kinematically analyzed in terms of the time, angle, and angular velocity factors involved with the kicks through the three-dimensional imaging. The results of the analysis are as fellows. 1. Time factor The first phase(preparation) was 0.48sec on average, accounting for 60% of the entire time spent; the second phase(the minimum angle of the knee joint) was 0.21sec on average, taking up 26% of the whole time spent; and the third phase(hitting) was 0.11sec on average, representing 14% of the entire time spent. 2. Angle factor In the first phase(preparation), rotating their bodies along the long axis, the players bended their hip and knee joints a lot, by moving fast in the vertical and horizontal directions, in the second phase(the minimum angle of the knee joint), the players continued to extend their bodies along the vertical axis, while pronating their lower legs and bending their hip and knee joints a lot to reduce the radius of gyration, and in the third phase(hitting), they extended their knee joints greatly so that the angle movements of their lower bodies shifted to circle movements. 3. Angular velocity factor In the first phase(preparation), the angular velocity of the hip and knee joints increased. while moving horizontally and rotating the body along the long axis; in the second phase(the minimum angle of the knee joint), the angular velocity increased by bending the hip and knee joints fast to reduce the rotation radios; and in the third phase(hitting), the angular velocity was found to have increased, by rotating the body along the long axis to increase the angular velocity and shifting the angular momentum of the pronated knee joint to the circular momentum.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.9
• /
• pp.136-143
• /
• 2013

In this paper, a algorithm to find joints of a small animal like a lizard from the multiple-view silhouette images is presented. The proposed algorithm is able to calculate the 3D coordinates so that the locomotion of the lizard is markerlessly reconstructed. The silhouette images of the lizard was obtained by a adaptive threshold algorithm. The skeleton image of the silhouette image was obtained by Zhang-Suen method. The back-bone line, head and tail point were detected with the A* search algorithm and the elimination of the ortho-diagonal connection algorithm. Shoulder joints and hip joints of a lizard were found by $3{\times}3$ masking of the thicked back-bone line. Foot points were obtained by morphology calculation. Finally elbow and knee joint were calculated by the ortho distance from the lines of foot points and shoulder/hip joint. The performance of the suggested algorithm was evaluated through the experiment of detecting joints of a small lizard.

• Journal of Korean Foot and Ankle Society
• /
• v.11 no.2
• /
• pp.135-140
• /
• 2007

Purpose: To evaluate the incidence and describe radiologic pattern of ankle arthritis following change of mechanical loading axis by total knee arthroplasty. Materials and Methods: We reviewed radiographs of 419 cases, 243 patients underwent total knee arthroplasy from January 2002 to October 2006 retrospectively. We described radiologic parameters around the ankle joint and measured the amount of change of knee varus or valgus angle by comparing preoperative and postoperative anteroposterior standing lower extremities AP X-rays. We divided cases into two groups, one with radiologically arthritic change of the ankle joint and the other one without any radiologic change after surgery. We compared two groups in each parameters and analyzed statistically (SPSS v13.0). Results: Three hundred eighty one cases were divided into varus group and 38 cases in valgus group. 125 cases were divided into ankle arthritic change-positive subgroup among the varus group and 251 cases were in negative subgroup. The amount of varus angle correction by total knee arthroplasty showed significant difference between two subgroups. There was no significant difference in each parameters between subgroups within 38 valgus cases. Conclusion: Ankle arthritis can be aggravated after total knee arthroplasty because of the change of mechanical loading axis onto the ankle joint. Therefore it may be needed to evaluate symptoms and function of ankle joints before performing total knee arthroplasties especially in patients with huge varus deformities of knee joints.

• Journal of Korean Foot and Ankle Society
• /
• v.9 no.1
• /
• pp.47-51
• /
• 2005

Purpose: We reviewed the results of ankle arthritis with advanced deformity treated with open arthrodesis. Materials and Methods: Seventeen patients who had painful ankle arthritis with advanced deformity underwent open arthrodesis using chevron osteotomy or transfibular approach and were followed for an average of 4.2 years (range, 1.5 to 9.7 years). The average age was 51.4 years and the most common cause was traumatic arthritis (13 patients). Postoperative outcome was evaluated using Mazur's grading system for ankle function. we also checked time to union, patient satisfaction, complications, position of arthrodesis and degenerative changes of adjacent joints. Results: Clinical score was improved to 76.4 points from 46.7 points. Average time to union was 4.3 months and the rate of satisfaction was 88%. Complications included 1 nonunion, 2 malunion, 1 superficial infection and 1 combined delayed union and malunion. There were 14 cases within $5^{\circ}$ valgus in frontal plane and 13 cases within neutral to $5^{\circ}$ dorsiflexion in sagittal plane. 3 cases in chevron osteotomy revealed valgus and plantarflexed position over $5^{\circ}$. Degenerative changes of adjacent joints was seen in 2 patients. Conclusion: Open arthrodesis for ankle arthritis with advanced deformity shows favorable clinical outcome. Transfibular approach shows more consistent results than chevron soteotomy for desired position of arthrodesis.

• Korean Journal of Applied Biomechanics
• /
• v.18 no.1
• /
• pp.1-10
• /
• 2008

This study analyzed the rear foot angle of the supporting leg and the anatomical rotation angle of the kicking angle in soccer instep kick and drew conclusions as follows. When the supporting leg was landing on the ground, the valgus angle of the ankle joint reached the maximum peak, and plantar flexion was slightly different in the timing of the maximum peak between the two groups. The flexion angle of the rear foot was statistically significantly different between the two groups, and the movement of the crus on the landing of the supporting foot did not show a statistically significant difference between the groups. The crus leaned backward most before the impact, and the side to side gradient of the crus on impact was $22^{\circ}$. The flexion/extension of the hip joint of the kicking leg reached the maximum peak when the supporting foot was landing on the ground, and at the moment, the maximum extension angle of the hip joint was over $30^{\circ}$. The flexion angle of the knee joint of the kicking leg was largest after landing. While the maximum plantar flexion angle and maximum valgus angle of the ankle joint were not significantly different between the two groups, the maximum external rotation angle was significantly different.

• Korean Journal of Applied Biomechanics
• /
• v.30 no.1
• /
• pp.51-61
• /
• 2020

Objective: The purpose of this study is to analyse and comparison the differences of kinematic variables for Fente skill in Fencing. Method: For this, 15 people were selected as 5 beginners with less than 2 years of experience, 5 intermediate-class people with more than 2 years and less than 4 years, and 5 experts-class people with more than 4 years. Through the comparison of Marche Fente motion according to proficiency, for the necessary time, travel distance, the kinematical factor of joint angle, oneway ANOVA was performed in order to identify differences according to variables by phase. Results: The time required for each phase was shown to be shorter for all phases experts than for beginners and intermediates. At the horizontal displacement of the foot, the right foot left out the last phase and the experts appeared long. The left foot showed short beginners in all phases. The angle of forward lean showed that the angle of forward lean was tilted forward by the experts of all phases. There was a difference between the left and right joint angles of the lower limb, both of the ankle, knee and hip joints. Conclusion: In overall, Beginners should quickly widen the distance of their feet when they make a Fente movement. The beginner shall tilt the upper body forward in order to increase the angle of forward lean. The beginner shall, in the last phase, have a smaller angle on the hip joint.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.8 no.3
• /
• pp.177-185
• /
• 2014

In this study, the exoskeleton orthosis for the assistance of dorsiflexion torque in ankle joint to prevent foot-drop was developed. It was consist of three part; 1) the power part using artificial pneumatic actuator, 2) wearing part of ankle and knee joints to fix the orthosis, and 3) control part to detect the gait phase using physiological signal. The dorsiflexion torque was generated by the artificial pneumatic actuator connected with wearing part between ankle and knee joint. The accurate timing to assist dorsiflexion torque is made up of physiological signal in foot sole part that detect the gait phase, that is, stance and swing phase in each foot. We conduct the experiment to investigate the effect of exoskeleton orthosis to the 7 elderly people and 10 healthy people. The result showed that the muscular activities in tibialis anterior muscle were reduced because of the assistance of dorsiflexion torque in ankle joint using the exoskeleton orthosis.

• Journal of Korean Foot and Ankle Society
• /
• v.5 no.1
• /
• pp.55-61
• /
• 2001

Purpose: To evaluate the clinical and functional results of ankle arthroplasty and to analyze the complications in total ankle arthroplasty. Materials and Methods: Between October 1988 and October 1991, the total ankle arthroplasty had been performed in eight ankle joints of seven patients.. There were five patients with rheumatoid arthritis, one with osteoarthritis and one with traumatic arthritis. One patient had bilateral replacement. New Jersey type of prosthesis was used in six patients and one patient was performed with Odland type of prosthesis. The average age at surgery was 42.3 years (range, 33-54 years). The average follow-up period was 8.2 years (range, 6-10.5 years). Clinical evaluation was assessed according to the Ankle-Hind Foot Scale of American Orthopedic Foot and Ankle Society. Results: The average score was 81.4 (range, 76 - 90) at the most recent follow-up. All patients were satisfied with their clinical results. Relief of pain was excellent in most patients, but postoperatively there was no significant improvement in range of motion. One patient had arthrodesis at three year six months after total ankle arthroplasty due to deep infection. Conclusion: This study shows total ankle arthroplasty is a good alternative treatment in selected cases of osteoarthritis and rheumatoid arthritis.