• Korean Journal of Agricultural Science
• /
• v.42 no.3
• /
• pp.177-181
• /
• 2015

Food waste has been widely considered as a recycling resource to be applied to agricultural lands due to the effects of organic matter and nutrient for plant productivity. but the maturity and salt concentration in the compost produced from food waste processing facilities should be considered firstly, which was little information on compost quality produced from food waste treatment facility. In this study, we examined actual situation of food waste processing facility on the composting of food waste and evaluated the characteristics of composts produced from food waste processing facilities. The quality of composts was analyzed on the basis of the criteria of fertilizer processing manual. The 46% of food waste treatment facility registered composting produced actually the compost mixed with food waste or animal waste. The compost maturity and salt concentration as indicators of the quality of compost were not met 46.8% of composts collected from food waste processing facilities to the criteria of fertilizer processing manual. Also, 15.6%(moisture) were not satisfied with the criteria. In conclusion, the compost produced from food waste processing facilities is firstly required with better compost maturity and reduced salt concentration in order to use to agricultural lands as an amendment.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.3
• /
• pp.157-165
• /
• 2017

Being a staple food for more than half of the population of the world and South Korea, rice is an important crop. For the past 20 years, global paddy rice cultivation area and production have shown an annual growth of 0.46% and 1.61%, respectively. Global rice consumption for food and processing has increased by 1.37% and 3.68%, respectively. Due to the main reason for such increasing human population, it is expected that from 439 million tons in 2010, additional 116 million tons will be needed in 2035. Global rice imports and exports have doubled in the last 20 years. However, in spite of such increment, global rice exports in 2013 were 8.4% of the total production. It is thought that rice protection policies in the producing countries are the main reason for such small scale of rice trading. In the past 5 years, India recorded the largest growth rate in rice exports (51.4%), whereas China showed the largest growth rate in imports (61.0%). For global utilization of milled rice during the same period, approximately 79.4% was used as food, 7.2% as animal feeds, and 1.4% for processing. Regionally, Asia has shown a similar pattern to the global rice usage, whereas utilization for processing in America, for food in Africa, and for animal feed in Europe was relatively higher than the global rice usage. Korea's cultivation area and production since the last 5 years, are 0.5% and 0.8% of those of the world, respectively. Its annual rice export is approximately 3,000 tons, which is 0.01% of the global rice export. Korea's rice utilization is high for food and low for feed and for processing relative to global rice utilization. Therefore, a review must be conducted to increase Korea's utilization of rice for processing and for feed production.

• Journal of the Korean Society of Industry Convergence
• /
• v.21 no.6
• /
• pp.301-307
• /
• 2018

This paper deals with the development of the high frequency thawing machine. The fishery products caught over the world are kept frozen to maintain freshness. These fishery products require thawing before they are sold to customers as food. However, the thawing process can cause freshness reduction, drip coming out, quality deterioration, discharging polluted water, as well as a lot of space and time. The high frequency thawing machine developed to solve this problem has a narrow space, a short thawing time and a small drip. The developed high frequency thawing machine can be used in many fields such as fish processing plant, livestock processing plant. This paper describes the design of the high frequency thawing machine by developing the high frequency generator, development of the controller, and the design of mechanism, and shows the superiority of the high frequency thawing machine by the performance evaluation.

• The Korean Journal of Pesticide Science
• /
• v.13 no.2
• /
• pp.70-78
• /
• 2009

Processing factors of pesticides in milling process of wheat grain, which are consumed and imported at large quantity were examined to establish reasonable MRL of the processed food. Azinphos-methyl, chlorpyrifos, chlorpyrifos-methyl, fenitrothion, malathion, and trichlorfon were selected for the study according to annual usage and the previous detection record in wheat grain. Dipping process for pesticide application was performed in laboratory, while milling process was conducted under pilot plant system. Processing factors were calculated by analyzing residual pesticides on wheat grain and processing products as wheat flour, bran and red dog. Processing factors were 0.05 for azinphos-methyl, 0.06 for chlorpyrifos, 0.05 for chlorpyrifos-methyl, 0.07 for fenitrothion, 0.07 for malathion, 0.06 for trichlorfon, respectively. Recovery test was also performed to establish extraction efficiency of analytical procedure. The recovery value ranged from 93.2% to 98.6% with standard deviation of 0.1-0.9%.

• Proceedings of the Korean Society of Plant Biotechnology Conference
• /
• 2003.10a
• /
• pp.179-179
• /
• 2003

• Journal of Plant Biotechnology
• /
• v.36 no.4
• /
• pp.301-308
• /
• 2009

Higher agricultural commodity prices are a particular concern for food importing countries like Korea that has a very low self-sufficiency ratio. Korean people eat approximately 4.5 million metric tons of rice each year, which is met without a problem by domestic production. The domestic production of corn and soybean which are important raw materials for commercial food processing and livestock feed is only minimal. Demands of corn and soybean in Korea are approximately 7.2 million and 1.3 million metric tons per year, respectively. Since Korean consumers are reluctant to accept biotech (GM) foods, Korean food processors are fighting an up-hill battle in purchasing non-biotech (non- GM) crops which are becoming scarce.

• Food Science and Preservation
• /
• v.16 no.4
• /
• pp.573-578
• /
• 2009

Microbial contamination levels in a fresh-cut leafy vegetable processing plant were evaluated. Total plate counts of samples collected from the walls, equipment, and raw materials ranged from $10^1{\sim}10^2$ CFU/100 $cm^2$, $10^0{\sim}10^4$ CFU/100 $cm^2$, and $10^4{\sim}10^6$ CFU/g, respectively. No coliforms were detected on walls; however, equipment and raw materials contained coliforms in concentrations ranging from ND (not detected)to $10^2$ CFU/100 $cm^2$ and $10^4{\sim}10^5$ CFU/g, respectively. Additionally, total plate counts for falling and floating bacteria in the processing plant were $10^0{\sim}10^1$ CFU/plate and $10^1{\sim}10^3$ $CFU/m^3$, respectively. Pathogenic microorganisms such as Escherichia coli, Salmonella spp, Staphylococcus aureus, or Listeria monocytogenes were not detected on walls, equipment, or raw materials. Overall, the results of this study indicate that hygiene control in the fresh-cut processing plant should be improved.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.50 no.2
• /
• pp.120-129
• /
• 2017

This study assessed the safety of raw oysters Crassostrea gigas for consumption during processing in a processing plant. Bacterial contamination (e.g., viable cell counts, coliform groups, Escherichia. coli and pathogenic bacteria) and chemical contamination (e.g., heavy metals and shellfish toxins) were measured on raw oysters, a processing equipment, employees and work areas. No total mercury, lead, paralytic shellfish poison, diarrheic shellfish poison or norovirus was detected in any post-harvested oyster samples. However, the cadmium level ranged from 0.1-0.2 mg/kg. The viable cell count, E. coli and coliform group levels in post-harvested oysters ranged from 4.00-4.54 log CFU/g, ND-210 MPN/100 g and 110-410 MPN/100 g, respectively. The viable contaminating cell counts on employees, equipment and work areas were in the range of $0.90-3.46log\;CFU/100cm^2$. Airborne bacteria in the work areas ranged from 0.60 to 1.81 log CFU/plate/15 min. Thus, no significant health risks were detected in the processing plant.

• Journal of the Korean Society of Food Culture
• /
• v.24 no.3
• /
• pp.308-314
• /
• 2009

In this study, we examined the composition of catechins, theaflavins and alkaloids in leaves during processing to fermented black tea, which is produced by withering, roll breaking, and fermentation of Korean Yabukida tea plant. In addition, we determined the optimal conditions for the production of fermented black tea. The average moisture content in fresh leaves was 70.85%, which dropped to 3.07% in fermented black tea at the last stage of production. When the leaves were analyzed by HPLC, seven types of catechins, four types of theaflavins and three types of alkaloids were identified. The levels of catechins, theaflavins, and alkaloids were then evaluated after being processed into fermented tea. From these experiments, we found that the level of theaflavins, which determines the property of the tea, increased during fermentation. This effect resulted from the change in EGCG, ECG, EGC, EC during the process of fermentation. We also found that the maximal amount of theaflavins was created after 1-2 hours of fermentation. Thus, our results imply that the best condition for producing fermented black tea would be to ferment for 1-2 hours.

• Journal of Ginseng Research
• /
• v.36 no.4
• /
• pp.442-448
• /
• 2012

Somatic embryogenesis is one of good examples of the basic research for plant embryo development as well as an important technique for plant biotechnology such as medicinally important plants. Single embryos develop into normal plantlets with shoots and roots. Therefore, direct single embryogenesis derived from single cells is highly important for normal plant regeneration. Here we demonstrate that the cyclic secondary somatic embryogenesis in Panax ginseng Meyer is a permanent source of embryogenic material that can be used for genetic manipulations. Secondary somatic embryos were originated directly from the primary somatic embryos on hormone-free Murashige and Skoog medium, and proliferated further in a cyclic manner. EM medium (one third of modified MS medium [MS medium containing half amount of NH4NO3 and KNO3] with 2% to 3% sucrose) favored further development of proliferated secondary somatic embryos into plantlets with root system. The plantlets developed into plants with well-developed taproots in half-strength Schenk and Hildebrandt basal medium supplemented with 0.5% activated charcoal.