• 한국식품위생안전성학회지
• /
• 제32권2호
• /
• pp.114-122
• /
• 2017

본 연구에서는 식품을 용기 포장 채로 조리하는 경우 니트로사민의 함량이 증가하는 사례에서 용기 포장에서의 니트로사민이 용출되는지 확인하였다. 조리를 할 수 있는 용기 포장 31종에 대해 각 식품 유형별로 침출용매를 선택하여 단면용출시험을 진행하였다. 용출 시험을 진행한 결과, 용기 포장에서는 NDMA, NDEA, NDBA가 모두 정량 한계 미만으로만 검출되었다. 따라서 용기 포장물질에서 침출용매로의 용출은 미미하였고 침출용매가 아닌 특정 식품에 의한 차이가 있는지 확인하고자 하였다. 토마토소스를 제외한 레토르트 시료는 조리 전과 후의 유의적인 함량 차이가 없었으며 컵라면 시료의 경우는 모든 시료에서 조리 전 NDMA가 불검출되었지만 조리 후 NDMA 함량이 trace${\sim}0.93{\mu}g/kg$로 검출되었다. 컵라면의 NDMA 함량 증가 원인을 파악하기 위해 구성요소인 면, 분말스프, 건더기스프, 물을 면밀히 검토하였다. 그 결과, 면과 분말스프를 조합하여 조리한 경우에만 NDMA가 생성되었으며 폴리스티렌 제품의 경우 모든 구성요소를 함께 조리할 때보다는 NDMA 함량이 적게 검출되었다. 따라서 컵라면 시료는 면과 분말스프 내의 니트로사민 전구체가 NDMA 생성에 기여하는 것으로 추정되며 건더기스프도 NDMA 함량 증가에 기여하는 것으로 보였다. 따라서 각 구성요소 내의 전구체에 대한 검토가 필요하며 조리 중 가열에 따른 반응을 검토하는 후속연구가 필요할 것으로 추정된다.

• Corrosion Science and Technology
• /
• 제14권4호
• /
• pp.166-171
• /
• 2015

Knowledge of how metal releases from the stainless steels used in food processing applications and cooking utensils is essential within the framework of human health risk assessment. A new European standard test protocol for testing metal release in food contact materials made from metals and alloys has recently been published by the Council of Europe. The major difference from earlier test protocols is the use of citric acid as the worst-case food simulant. The objectives of this study were to assess the effect of citric acid at acidic, neutral, and alkaline solution pH on the extent of metal release for stainless steel grades AISI 304 and 316, commonly used as food contact materials. Both grades released lower amounts of metals than the specific release limits when they were tested according to test guidelines. The released amounts of metals were assessed by means of graphite furnace atomic absorption spectroscopy, and changes in the outermost surface composition were determined using X-ray photoelectron spectroscopy. The results demonstrate that both the pH and the complexation capacity of the solutions affected the extent of metal release from stainless steel and are discussed from a mechanistic perspective. The outermost surface oxide was significantly enriched in chromium upon exposure to citric acid, indicating rapid passivation by the acid. This study elucidates the effect of several possible mechanisms, including complex ion- and ligand-induced metal release, that govern the process of metal release from stainless steel under passive conditions in solutions that contain citric acid.

• 한국포장학회지
• /
• 제11권2호
• /
• pp.101-107
• /
• 2005

The term 'antimicrobial' packaging encompasses any packaging technique(s) used to control microbial growth in the food product. These include packaging materials and edible films and coatings that contain antimicrobial agents, and also techniques that modify the atmosphere within the package. In recent years, antimicrobial packaging has attracted much attention from the food industry because of the increase in consumer demand for minimally processed, preservative-free products. Reflecting this demand, the preservative agents must be applied to packaging in such a way that only low levels of preservatives come into contact with the food. The film or coating technique is considered to be more effective, although more complicated to apply. New antimicrobial packaging materials are being developed continually. Many of them exploit natural agents, to control common food-borne microorganisms. Current trends suggest that in due course, packaging will generally incorporate antimicrobial agents and the sealing systems will continue to improve. The focus of packaging in the past has been on the appearance, size and integrity of the package. A greater emphasis on safety features associated with the addition of antimicrobial agents is perhaps the next area for development in packaging technology.

• 대한치과보철학회지
• /
• 제52권1호
• /
• pp.27-33
• /
• 2014

연구 목적: 본 연구는 임플란트 보철물과 인접치 사이의 식편압입을 호소하는 환자를 대상으로 각종 임상 자료를 분석하여 식편압입의 임상적 발현 양상을 알아보고자 하였다. 연구 재료 및 방법: 식편압입을 주소로 내원한 보철물 장착이 완료된 임플란트 환자 51명을 대상으로 설문조사와 구강검사를 시행하고 방사선 사진과 모형을 채득하여 식편압입과 관련이 있는 요소를 분석한 결과 다음과 같은 결과를 얻었다. 결과: 1. 식편압입은 하악(39.2%)보다 상악(60.7%)에서 많이 나타났다. 2. 식편압입은 자연치아가 임플란트 보철물의 원심 부위(13.7%)에 있는 경우보다 근심 부위(86.2%)에 있는 경우에 많이 나타났다. 3. 식편압입이 나타난 임플란트 보철물과 그 인접치 사이의 접촉점은 긴밀하지 않은 경우(94.2%)가 대부분이었다. 결론: 임플란트 보철물과 인접치 사이에 식편압입이 일어나지 않기 위해서는 임플란트 보철물과 인접치아가 적절한 긴밀도를 가지고 있어야 하겠다.

• 한국포장학회지
• /
• 제5권2호
• /
• pp.42-58
• /
• 1999

Packaging materials and articles that are used in food contact applications can transfer constituents in the foodstuffs. This kind of risk of possible health hazards to consumers has been generally recognized for a long time with the consequence of establishing corresponding food regulations in most developed countries. However, the language of these laws, their interpretation, and their level of enforcement vary from country to country. Accordingly, the actual migrating levels from packaging materials can be varied depending on the migration testing methods as prescribed in the national legislation in each countries. Therefore, there are needs of elimination of non-tariff trade barriers raised by sanitary and phytosanitary or technical measures under the Final Act of the UR Agreement. In this connection, the EU and USA are currently in an ongoing process of legislation harmonization to overcome potential barriers to free trade. In general, regulations governing component transfer in the USA are more complicated and comprehensive than similar regulations in Europe. In future, standard migration testing procedures for microwave heat susceptor materials and for the use of fatty food simulant should be established and also harmonized among countries. The objective of this investigation is to compare the current regulations for migration testing for plastic containers and packaging materials in USA, EU and Korea or Japan. For those regulations, Korean standards are required to be kept up with the international standards. By doing this, the related Korean regulation could be amended along with the worldwide progress for harmonization.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.665-670
• /
• 2001

The purpose of this study is to develop a new type dryer, which is to proceed mixing and drying of wet-materials at the same time and drying process is carried out in a closed system. In this drying system, thermal contact occurs, when a fluidized zone is created by paddle mechanism. Accordingly, wet-materials is dried in a short time without any damage. Also wet-materials could be dried uniformly to low moisture contents. It is suitable to dry a small quantity of multi-kind materials. And drying process is carried out in a closed system, so as for environmental pollution dust not to be emitted into the atmosphere. Accordingly, it could be used to dry not only food and chemical materials, but also environmental pollution materials.

• 한국포장학회지
• /
• 제24권3호
• /
• pp.107-112
• /
• 2018

납, 카드뮴 및 비소의 폴리카보네이트 기구류에서 식품으로의 이행 수준을 ICP-MS로 조사하였다. 분석법을 확립 및 검증(검량선, 검출한계, 정량한계, 회수율, 정밀성 및 측정불확도)하고 식품모사용매(4% 초산)로 용출시켜 이행량을 분석하였다. 폴리카보네이트 재질 기구인 컵 63종, 용기 62종, 물병 55종, 스푼 9종, 국자 6종 및 집게 5종으로 총 200종의 시료를 $70^{\circ}C$와 $100^{\circ}C$에서 30분간 용출한 결과, 납, 카드뮴 및 비소가 각각 $ND{\sim}4.67{\mu}g/L$, $ND{\sim}0.49{\mu}g/L$및 $ND{\sim}2.91{\mu}g/L$수준으로 용출되었다. 또한, 온도에 따른 이행량 차이를 관찰한 결과, $70^{\circ}C$보다는 $100^{\circ}C$에서 용출되는 이행량이 다소 높았다. 결론적으로 현재 국내에 유통 중인 폴리카보네이트 기구류 중 납, 카드뮴 및 비소는 식품용 기구 및 용기 포장 공전에 명시된 용출규격 이하로서 안전하게 관리되고 있는 것으로 판단되었다.

• 한국환경보건학회지
• /
• 제42권3호
• /
• pp.160-168
• /
• 2016

Objectives: Materials coming into contact with food may result in the migration of chemical substances into the food. To protect consumers from exposure, Regulation (EU) No. 10/2011 specifies the use of standard migration tests. Polyethylene terephthalate (PET), widely used for food packaging materials, has drawn the attention of researchers because unwanted migration of PET into food might occur when consumers reuse packaging material. The aim of this study was to predict and develop a migration model for two components, acetaldehyde and butyraldehyde in PET, into food simulants under conditions of changing pH and solvents, such as those observed in fermented foods like kimchi or sauerkraut. Methods: Using a migration model based on Fick's second law of diffusion in one dimension, the migration of acetaldehyde and butyraldehyde from PET into a simulant of fermented food at $20^{\circ}C$ over 10 days was evaluated. The simulant for fermented food was modelled as 10% ethanol for three days, followed by 3% acetic acid for seven days. Results: The migration of acetaldehyde into the 10% ethanol was 0.36 times that of a simulated fermented food system, while that of butyraldehyde was 1.34 times greater. These results may have been influenced by the chemical interactions among the migrants, polymers and simulants, as well as by the solubilities of the migrants in polymers and simulants. Conclusion: Because food simulants have a limited capacity to mimic real food systems under the current migration model, an appropriate simulant and migration test should be considered in the case of increasing acidity. Furthermore, since the accuracy of the worst-case estimation of migration predicted by the current model is severely limited under changing food conditions, food simulants and their interactions should be further investigated with respect to conservative migration modelling.

• 한국포장학회지
• /
• 제18권1_2호
• /
• pp.27-32
• /
• 2012

본 연구에서는 식품포장재로 이용되는 재활용 및 비재활용 종이류가 안전한지를 평가하기 위해 식품공전 규격에 준하여 실험하였다. 식품포장재 중에서도 피자상자를 선택하였는데, 이는 피자가 고온에서 조리되어 포장되며 다량의 기름 성분을 함유하여 오염물질이 이행될 가능성이 상대적으로 높을 것으로 예상됐기 때문이다. 식품공전에서는 PCBs, 납, 카드뮴, 수은, 6가크롬, 비소, 포름알데히드 및 형광증백제의 허용 잔존농도를 정하여 식품포장재로 이용되는 종이류에 잔존하는 유해물질을 규제하고 있다. PCBs의 여섯개의 표준품과 모든 시료의 피크가 일치하지 않았으므로 피자상자에는 PCBs가 잔존하지 않는 것으로 판단된다. 카드뮴, 수은, 6가크롬에 대한 재질규격 평가를 위한 분석이 추가적으로 필요하다고 사료된다. 비소와 납은 모든 시료에서 기준치의 10배 이하의 양이 검출되어 식품포장재로 사용되었을 때 안전성에 큰 영향을 미치지 않을 것으로 판단된다. 포름알데히드는 모든 시료에서 기준치보다 낮은 농도로 검출되었지만 잉크를 많이 함유하고 있는 표면에서 미량이지만 상대적으로 높게 검출되었다. 형광증백제는 비재활용 종이 소재의 상자에서는 검출되지 않았다. 그러나, 상자 내 피자 포장 유무나 잉크의 함량 정도에 상관없이 재생용지로 만들어진 상자 시료에서는 형광증백제가 검출되었다. 형광증백제는 불검출이 기준이므로 포함된 재활용지를 식품 포장으로 이용할 때는 식품과의 직접 접촉을 피하기 위해 중간에 안전성이 입증된 간지 등을 삽입하는 방법을 사용하여 최종 식품의 안전성에 영향을 주지 않는 것이 바람직할 것이다.

• Nutrition Research and Practice
• /
• 제13권3호
• /
• pp.189-195
• /
• 2019

BACKGROUND/OBJECTIVES: Although aged black garlic has various biological activities such as anti-allergy, anti-inflammation and neuroprotection, effect of aged black garlic on chemically contact dermatitis is unclarified. MATERIALS/METHODS: To evaluate anti-dermatitic activity of aged black garlic extract, we investigated effects of a fraction of aged black garlic extract (BG10) on both in vivo and in vitro. RESULTS: BG10 almost inhibited formation of nitric monoxide and interleukin-6 (IL-6; $IC_{50}$, $7.07{\mu}g/mL$) at $25{\mu}g/mL$, and dose-dependently reduced production of tumor necrosis $factor-{\alpha}$ ($TNF-{\alpha}$; $IC_{50}$, $52.07{\mu}g/mL$) and prostaglandin $E_2$ ($IC_{50}$, $38.46{\mu}g/mL$) in lipopolysaccharide-stimulated RAW264.7 cells. In addition, BG10 significantly inhibited the expression of inducible nitric oxide synthase, cyclooxygenase-2 and nuclear $NF-{\kappa}B$, and improved that of cytosolic levels of $NF-{\kappa}B$ and $I{\kappa}B{\alpha}$ in the cells. Consistent with in vitro studies, BG10 (0.5 mg/mL) not only reduced ear edema but also suppressed the formation of IL-6 and $TNF-{\alpha}$ induced by 12-O-tetradecanoylphorbol-13-acetate in ear tissues of mice. CONCLUSIONS: These findings suggest BG10 has anti-dermatitic activity through inhibiting activation of macrophages. Therefore, such effects of BG10 may provide information for the application of aged black garlic for prevention and therapy of contact dermatitis.