• Textile Coloration and Finishing
• /
• v.8 no.6
• /
• pp.55-64
• /
• 1996

The compression properties of the 2 folded yams such as compression linearity, compression resilience, and compression work with various wool/polyester blend ratios and with single and 2-folded yarn twists under various degrees of twisting were studied for analyzing twist characteristics, inter and intra frictional effects. A variation of single and 2-folded yarn twists was analysed in their twist structure. This structural analysis was discussed with various wool/polyester blend ratios and various single and 2-folded yarn twists.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.65 no.1
• /
• pp.72-75
• /
• 2016

In this paper, we proposes a internal antenna for wireless DVI dongle device using the folded monopole structure. The proposed antenna uses a basic structure of spiral and monopole. The antenna optimized for parameters length, gap, width, and rectangle of folded monopole antenna using the spiral structure. To confirm the characteristics of the antenna parameters, HFSS from ANSYS Inc. was used for the analysis. We used an FR4 dielectric substrate with a dielectric constant of 4.4. The DVI dongle size of the proposed antenna is $50{\times}40{\times}1.6mm$, and the size of the antenna area is $10{\times}40mm$. There is a value of return loss less then -10dB in 2.4GHz and 5.8GHz, band and the maximum antenna gain is -4.13dBi. The utilization possibility of the wireless DVI Dongle antenna have a folded monopole with spiral shape could be confirmed according to compare and analyze the simulation and measurement data.

• Journal of electromagnetic engineering and science
• /
• v.7 no.3
• /
• pp.116-121
• /
• 2007

Novel design of a wideband monopole antenna for DVB-H service is presented. The proposed antenna is designed based on a monopole antenna. It consists of folded monopole and parallel parasitic element. The folded segment of the folded monopole makes the antenna shorter. The length of the parasitic element obtains additional resonance frequencies. The gap distance between the folded monopole and the parasitic element is a key parameter to control impedance matching for wideband operation. The antenna has wide band performance, good impedance and radiation characteristics from 470 MHz to 870 MHz. The measured return loss for operating frequencies over DVB-H band is better than 10 dB. Good radiation patterns are also obtained. The measured results are compared with calculated results using Ansoft HFSS(High Frequency Structure Simulator).

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.61 no.1
• /
• pp.5-9
• /
• 2012

In this paper, multi folded dual monopole antenna for WLAN communication of dual bend is designed and fabricated. The proposed multi folded dual monopole antenna are consisted of two folded rectangle loops by microstrip fed that is modified dual monopole antenna. Therefore, the outside rectangle loop structure of the proposed antenna is extended a dual monopole. The characteristics of the proposed antenna is analyzed return loss and radiation patterns by the FDTD tools. As a result a bandwidth of proposed antenna has about 0.82GHz from 2.0 to 2.82[GHz] and 0.7GHz from 5.46 to 6.16[GHz]. It is used WLAN communications of 2[GHz] and 5[GHz].

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2000.04a
• /
• pp.93-96
• /
• 2000

The theory of non-prismatic folded plate structures was reported by the senior author in 1965 and 1966. Fiber reinforced composite materials are strong in tension. The structural element for such tension force is very thin and weak against bending because of small bending stiffnesses. Naturally, the box type section is considered as the optimum structural configuration because of its high bending stiffnesses. Such structures can be effectively analyzed by the folded plate theory with relative ease. The "hollow" bending member with uniform cross-section can be treated as prismatic folded plates which is a special case of the non-prismatic folded plates. Tn this paper, the result of analysis of a folded plates with one box type uniform cross-section is presented. Each plate is made of composite laminates with fiber orientation of [ABBCAAB]$_r$, with A=-B=$45^{\circ}$, and C=$90^{\circ}$. The influence of the span to depth ratio is also studied. When this ratio is 5, the difference between the results of folded plate theory and beam theory is 1.66%. is 1.66%.

• Economic and Environmental Geology
• /
• v.10 no.4
• /
• pp.177-184
• /
• 1977

This study is focused on the geological structure of Igog-Jangam folded zone in the vicinity of Goesan town where Ogcheon group distributes. The geology is composed of Gyemyungsan formation, Daehyangsan quartzite, Munjuri formation and Hwanggangri formation of Ogcheon group unknown age in descending order, and porphyritic biotite granite and dyke rocks that intruded into the Ogcheon group. The study revealed that Igog-Jangam folded zone is a plunged synclinal fold based on the following evidences; 1) Some pebbles in Hwanggangri formation at Minaemi-gol (a name of village) consists of phyllite of Munjuri formation. 2) The pebble bearing phyllitic bed in this area, Hwanggangri formation was recognized as the uppermost member in Ogcheon group instead of the basal one of the group. 3) A crest of anticlinal fold has been appeared near the Goegang bridge as a structural counter-part of that of the present area. 4) The study of lineation of minor fold in Munjuri formation also suggests that Igog-Jangam folded zone manifests to be a synclinal structure.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.1
• /
• pp.19-24
• /
• 2024

In this paper, in order to realize lower cut-off frequency of the waveguide, the folded Ridge waveguide (FRWG) is suggested by alternating T-shape structure in the conventional folded waveguide with Y-shape structure. Suggested FRWG can be equivalent by the reverse Ridge waveguide. As the height of side of the FRWG is lower, the width of side is increased. Therefore, the cut-off frequency of the FRWG can be decreased more than half compared with conventional waveguide. The FRWG is designed with the length, height, and width of Y-shape structure of 40mm, 20mm, and 2mm, respectively. Designed FRWG has the cut-off frequency of the 1.996GHz. Also, the transition between the FRWG and SMA connector is designed. The transition is optimized by the capacitance of the signal line of the connector. Its result shows the VSWR under 2:1 in the band of 2.064 ~ 3.050 GHz. Suggested FRWG can be applied with miniaturization of various waveguide devices.

• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1108-1110
• /
• 1995

This paper presents a balanced CMOS complementary folded cascode OP-AMP topology that achieves improved DC gain using the gain boosting technique, a high unity-gain frequency and improved slew rate using the CMOS complementary cascode structure and a high PSRR using the balanced output stage. Bode-plot measurements of a balanced CMOS complementary folded cascode OP-AMP show a DC gain of 80dB, a unity-gain frequency of 110MHz and a slew rate of $274V/{\mu}s$(1pF load). This balanced CMOS complementary folded cascode OP-AMP is well suited for high frequency analog signal processing applications.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.1
• /
• pp.97-102
• /
• 2008

A new internal antenna for GSM/DCS/Bluetooth application is proposed by using a folded loop resonator. Both feed leg and shorting leg are symmetrically implemented at the center of the folded loop, thus leading to produce resonances at integer frequencies of quarter wavelength. An open stub added at one end of the folded loop can reduce resonant frequencies. The open stub play a role in generating PIFA structure at a GSM band, thus increasing bandwidth, Two resonances at the GSM band are observed at folded ring and PIFA, respectively.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.143-146
• /
• 2004

This study is aimed to numerically evaluate a sound absorption performance of periodically folded barriers. Based on the formulation for sound absorption of a locally reacting surface in a periodic arrangement, variations of the sound absorption with parameters such as the folded width and depth are investigated. In comparison with the sound absorption of a conventional barrier with a flat surface, it is found that the periodically folded barriers can achieve a higher sound absorption especially in the low frequency range.