• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1580-1581
• /
• 2011

The linear accelerator of Pohang Accelerator Laboratory(PAL) will drive a top-up mode operation in PLS-II(Pohang Light Source-II). Due to this kind of the operation mode, the electron gun is expected to have shorter life time of the cathode. Further in the PLS-II, two gate valves will be installed in front of the electron gun. The distance between the pre-bunching section and the electron gun will increase by 400 mm compared to the existing system due to the insertion of these gate valves. As a result the incident electron beam. One of the goals to improve the beam pulse width is by incorporating suitable biased voltage. In this paper, we will present test results of beam pulse width as a function of different biased voltage and focusing solenoid coil.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.9
• /
• pp.930-936
• /
• 2008

Fluid loading of a vibrating cylindrical shell has influence on natural frequencies and vibration magnitudes of the shell and the acoustic pressure of fluid. The vibroacoustics of fluid-filled cylindrical shells need the coupled solution of Helmholtz equation and governing equation of a cylindrical shell with boundary conditions. This paper proposed the wall impedance of fluid-filled axisymmetric cylindrical shells, focusing on the inner fluid/shell interaction. To propose the impedance, shell displacements used the linear combination of in vacuo shell modes. Acoustic pressure prediction of fluid used Kirchhoff-Helmholtz integral equation with Green's function of the plane mode. For the demonstration of the proposed results, numerical applications on mufflers were conducted.

• Korean Journal of Optics and Photonics
• /
• v.5 no.2
• /
• pp.304-310
• /
• 1994

The use of thermally expanded core (TEe) fibers fabricated by thermal diffusion of dopants such as $GeO_{2}$ in hybrid fiber components has an advantage of eliminating lenses for collimation and focusing. An electric furnace is fabricated to heat the fibers locally for the core expansion. We observed an expansion of the mode size at $1.3\mu\textrm{m}$ wavelength by 27% after treating a section of single mode optical fiber at $1250^{\circ}C$ for 10 hours. hours.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.1
• /
• pp.35-39
• /
• 2005

To identify the activity of recombinant subtilisins (subtilisin BPN' and subtilisin Carlsberg), three different zymography methods, SDS-fibrin zymography (SDS-FZ), reverse fibrin zymography (RFZ), and isoelectric focusingfibrin zymography (IEF-FZ), were used. The recombinant subtilisins BPN' and Carlsberg did not migrate into the electrophoretic field based on a Laemmli buffer system, instead forming a "binding mode" at the top part of the separating gels with the SDS-FZ and RFZ techniques. Yet, this problem was resolved when using IEF-FZ with a pH range from 3 to 10. In addition, all these methods enabled the activity of a recombinant pro-subtilisin DJ-4 to be detected without a refolding pathway.

• Journal of Drive and Control
• /
• v.9 no.1
• /
• pp.10-17
• /
• 2012

Nowadays, the demand of energy saving is increasing more and more while the natural resources have been exhausted. Besides, the emission gas caused by vehicles has been being a serious environment problem. Therefore, many studies have been carried out, especially focusing on braking energy regeneration, in order to save energy as well as reduce emission of mobile vehicles. In this paper, we propose a closed-loop hydrostatic transmission for braking energy regeneration with two configurations to reduce the energy consumption by recovering the braking energy. The effectiveness of the proposed system was verified by simulation. The simulation results indicated that the pressure coupling configuration gave better performance in comparison to flow coupling configuration about 40.8%, 61.7% and 53.8% reduction of fuel consumption in 10 mode, 10 mode modified profile and highway schedules, respectively.

• Transactions of the Society of Information Storage Systems
• /
• v.6 no.1
• /
• pp.6-11
• /
• 2010

Researches for actuator which is appropriate to slim optical disk drive (ODD) have been progressed for a long time. Various types of actuators are suggested to secure high performances with slim thickness. In this paper, the slim actuator with symmetric electromagnetic (EM) circuit is suggested to apply slim ODD. Various EM circuits are proposed to increase EM force in the focusing and the tracking directions. Flexible mode frequencies and driving sensitivities are increased by using stress distribution and design of experiment (DOE). Consequently, final model is suggested to have high flexible mode frequencies and driving sensitivities.

• Industrial Engineering and Management Systems
• /
• v.14 no.4
• /
• pp.379-391
• /
• 2015

Several risk assessment techniques have been presented and investigated in previous research, focusing mainly on the failure mode and effect analysis (FMEA). FMEA can be employed to determine where failures can occur within industrial systems and to assess the impact of such failures. This research proposes a novel methodology for hazard analysis and risk assessments that integrates FMEA with the bow-tie model. The proposed method has been applied and evaluated in a real industrial process, illustrating the effectiveness of the proposed method. Specifically, the bowtie diagram of the critical equipment in the adopted plant in the case study was built. Safety critical barriers are identified and each of these is assigned to industrial process with an individual responsible. The detection rating to the failure mode and the values of risk priority number (RPN) are calculated. The analysis shows the high values of RPN are 500 and 490 in this process. A global corrective actions are suggested to improve the RPN measure. Further managerial insights have been provided.

• Smart Structures and Systems
• /
• v.33 no.1
• /
• pp.41-53
• /
• 2024

Grouting sleeves are an essential connecting component of prefabricated components, and the quality of grouting has a significant influence on structural integrity and seismic performance. The embedded grouting sleeve (EGS)'s grouting defects are highly undetectable and random, and no effective monitoring method exists. This paper proposes an ultrasonic guided wave method and provides a set of guidelines for selecting the optimal frequency and suitable period for the EGS. The optimal frequency was determined by considering the group velocity, wave structure, and wave attenuation of the selected mode. Guided waves are prone to multi-modality, modal conversion, energy leakage, and dispersion in the EGS, which is a multi-layer structure. Therefore, a time-reversal (TR)-based multi-mode focusing and dispersion automatic compensation technology is introduced to eliminate the multi-mode phase difference in the EGS. First, the influence of defects on guided waves is analyzed according to the TR coefficient. Second, two major types of damage indicators, namely, the time domain and the wavelet packet energy, are constructed according to the influence method. The constructed wavelet packet energy indicator is more sensitive to the changes of defecting than the conventional time-domain similarity indicator. Both numerical and experimental results show that the proposed method is feasible and beneficial for the detection and quantitative estimation of the grouting defects of the EGS.

• Journal of the Optical Society of Korea
• /
• v.15 no.3
• /
• pp.305-309
• /
• 2011

We present an efficient design approach for a plasmonic slot waveguide using a genetic algorithm. The analyzed structure consists of a nanometric slot in a thin metallic film embedded within a dielectric. To achieve high confinement without long propagation length, the thickness and width of the slot are optimally designed in order to optimize the figures of merit including mode confinement and propagation length. The optimized design is based on the finite element method and enhances the guiding and focusing of light power propagation.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.756-758
• /
• 2006

Although LCD market has been divided so far into high-end market with S-IPS & SPVA and low-en market with TN mode, TN MNT has been striving towards bigger share in large and high-resolution wide display market as well. LG.Philips LCD has developed 20.1 inch and 22.0 inch WSXGA+ wide monitor mainly focusing on the low cost based on high brightness, fast R/T, high color gamut and wide viewing angle.