• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.610.2-610.2
• /
• 2006

• Journal of Korean Society for Atmospheric Environment
• /
• v.16 no.4
• /
• pp.381-388
• /
• 2000

Ceramic foam prepared with cordierite as a starting material by foam method was tested to evaluate the feasibility as a filter for the dust collection in hot gas. Two different types of agents Benzethonium chloride (BZTC, C27H42NO2Cl) and Sodium Lauryl Sulfate(SLS, CH3(CH2)11OSO3Na) were used as foaming agents in foaming process. Porosityof ceramic foam was about 80% and mean pore size were 100${\mu}{\textrm}{m}$ for SLS agent and 200 ${\mu}{\textrm}{m}$ for BZTC. It was observed that ceramic foam was composed of continuous macro-pore structure with opening windows interconnecting macro-pores. The surface of ceramic foam support of was coated with cordierite particles ranged from 20${\mu}{\textrm}{m}$ to 50${\mu}{\textrm}{m}$ Meso-pore size in the coating layer on ceramic foam was below 10${\mu}{\textrm}{m}$. While air permeability of the support increased with increasing macro-pore size coated ceramic filters showed a constant permeability without regard to the macro-pore size of the support. The permeabuilities of support varied in the range of 600$\times$10-13m2 to 1000$\times$10-13m2. For the case of coated ceramic filter it was about 200$\times$10-13m2. As a result of particle trapping test by using fly ash the particle removal efficiency was over the 99.9%.

• Journal of the Korean Ceramic Society
• /
• v.52 no.6
• /
• pp.473-478
• /
• 2015

Green bodies of earthenware tile were prepared from a mixture of earthenware tile powder and SiC as forming agents by applying a conventional process. Granule powder for tile samples was prepared using the spray drying method with commercial earthenware raw material with a quantity of SiC of 0.3 wt%. The applied pressure was $250kg{\cdot}f/m^2$ and the firing temperature was $1050-1200^{\circ}C$. The effects of the SiC particle size and sintering temperature on the open porosity and total porosity were investigated and the correlative mechanism was also discussed. While total porosity was not significantly changed by decreasing the SiC particle size, the open porosity showed a gradual decrease, which represents an increase of the closed porosity. As the sintering temperature increased, coarsening was made among the pores due to excessive oxidation. The volume shrinkage and bending strength were demonstrated for the sintered tile samples. The sintered bulk density was also measured to determine the weight reduction value.

• Applied Chemistry for Engineering
• /
• v.4 no.4
• /
• pp.760-769
• /
• 1993

Solvent-free low foaming scouring agents(LFSA) were prepared by blending of polyoxyethylene(30) octadecylbenzylammonium chloride(POAC), block copolymer of propylene oxide-ethylene oxide[p(PO-b-EO) glycol], Sedlan FF-200(FF-200) and sulfonic acid-amine condensate of polyoxyethylene(10) nonylphenyl ether(PSAC). In consequence of several tests, FF-200/POAC/p(PO-b-EO) glycol/PSAC/water (20g/10g/5g/5g/60g) mixture (LFSA-5) showed good cleaning power, penetrating ability, emulsifiability and stability to alkali, and gave less problem in water pollution. Scouring effect of LFSA-5 was investigated by the change of percentage of exhaustion before and after scouring at various dyeing temperatures. The percentage of exhaustion of the unscoured PET fabric was 4.5% at $70^{\circ}C$, while that scoured with LFSA-5 was 1.3% at the same temperature, which proved LFSA-5 to be a good scouring agent. Moreover, the foaming power of LFSA-5 measured by Ross and Miles method was 6mm foam height immediately after foaming, and that measured by Ross and Clark method was less than 300mm foam height at $30^{\circ}C$, and 20mm at $80^{\circ}C$. As a result, LFSA-5 proved a good low foaming scouring agent.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.991-996
• /
• 2004

Plastics are widely used in industry, because they are light, easily manufactured, and have high specific strength. And many researches to increase the strengths and to reduce the price are being conducted at now. One of these researches is concerning to additives. Foaming techniques are used to endow insulation properties, to improve specific strength, or reduce the material cost. Due to their unique properties, foamed plastics are applied to refrigerator, pipe, and insulators. Micro-cellular foaming is the latest foaming technique that was invented at 1980 in MIT. It is known that many tiny small cells are generated in the polymer matrices and micro-cellular foamed plastics show relatively high specific strength. We investigated the role of CaCO3 which is one of the most widely used additives in plastics industry as an additive for nucleation in view of cell morphology. CaCO3 used in this paper was treated to increase the dispersibility and to lower the density, so it has many pores at his body. Two experiments were conducted, in order to check the role of an additive for nucleation. One is compound-ability and the other one is role of nucleation agents.

• Journal of the Korean Applied Science and Technology
• /
• v.28 no.2
• /
• pp.146-151
• /
• 2011

In this study, by using oleic acid and polypropylene glycol, good natured antifoaming agent for suitable electronics process under the alkaline conditions were synthesized. For the synthesized mono and diesters, acid value, hydroxyl value was measured, and identified by FT-IR and $^1H-NMR$ spectroscopy. Surface properties such as surface tension, critical micelle concentration(cmc) for diluted aqueous solution was measured, and tested the antifoaming properties according to the difference of alkyl chain length, various concentration, temperature and pH. The surface tension of synthesized antifoaming agent, PPMO(Polypropylene glycol monooleate) was 24.3 dyne/cm, PPDO(Polypropylene glycol dioleate) was 23.7 dyne/cm. By increasing of the alkyl chain length, surface tension was decreased slightly, and showed good antifoaming properties at 0.06 wt% concentration and $50^{\circ}C$, pH 11. These synthesized compounds are expected to apply as a suitable antifoaming agents in the semiconductor and the PCB(Printed Circuit Board) manufacturing process.

• Journal of the Korean Applied Science and Technology
• /
• v.14 no.3
• /
• pp.71-77
• /
• 1997

Low foaming acidic degreasing agent(LFADAs) were prepared by blending sorbitol, n-octanoic acid, MJU-100A, Tetronix T-701, Na-dioctyl sulfosuccinate, Demol C, and phosphoric acid. The physical properties of LFADAs tested with aluminum specimen showed the following results ; when 3wt% LFADA-6 was performed at $70^{\circ}C$, the degreasing rate was 95% which is comparitively good, and the percentage of etching was 0.275% which was found to be less than that of commercialized product. When 20wt% of LFADA-6 was added at $65^{\circ}C$, the percentage of derusting was 92% and the good defoaming effect proved by following low foaming power tests respectively : Ross and Miles, and Ross and Clark methods.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.6
• /
• pp.557-566
• /
• 2011

The surfactants facilitate the formation of foam bubbles under a proper condition and provide stability of foam bubbles by decreasing the surface tension of solutions and increasing the viscosity of foam surface. However, there have been almost no practical data of foam concrete in this regard so far. This study aims to understand the effects of foaming agents such as anionic synthetic surfactant and anionic natural material surfactant on the low density foamed concrete. From the experiment, the vegetable soap of anionic natural material surfactants showed a higher foaming rate, more open pores, slightly lower compressive strength, and a higher permeability coefficient compared to the vegetable soap of anionic synthetic surfactants. It is believed that the natural material surfactants make not only the surface tension of the solution low but also the viscosity of slurry high.

• Transactions of the Korean hydrogen and new energy society
• /
• v.15 no.3
• /
• pp.235-243
• /
• 2004

A number of potential applications of aluminum foams are being identified and renewed interest in these engineering materials is also reflected by several current research projects. One of the key issues for industrial exploitation of aluminum foams is the development of cost-effective manufacturing strategies facilitating, preferably, net shape production of foams with controlled porosity and cell size, and minimized structural imperfection. Especially, melt route to aluminum foam production based on the foaming agents offer attraction of low cost and the potential for good microstructure. The present paper is focused mainly on foaming agents of melt-foam aluminum such as $TiH_2$ or $TiH_2-Al$ mixture. For the purpose of economical manufacturing, we are proposed to hydrogen induced mechanical alloying (HIMA) process. Thermo-physical properties of particles synthesized are compared with conventional methods. Specimens synthesized are characterized by scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS), thermo- gravimetry-differential scanning calorymetry (TG-DSC), pressure-composition-isotherm. (PCI).

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.1
• /
• pp.72-77
• /
• 2015

In this study, anti-foaming agents of a fatty acid methyl esters was synthesized and confirmed by FT-IR and $^1H-NMR$ spectroscopy. Synthesized material of characteristic of -C=O group having a $1740cm^{-1}$ and -C-O group $1175cm^{-1}$ peak by using FT-IR, and it was confirmed that k. Surface tensions were measured by surface tensiometer CBVP-43. Their surface tension values was 17.7 to 21 dyne/cm. Anti-foaming abilities in the SLS solution was measured through the Ross-Miles method. Performance of the 4 type of anti-foaming agent was determined and the best anti-foaming agent was prepared using stearic acid methyl.