• 한국안전학회지
• /
• 제30권4호
• /
• pp.79-85
• /
• 2015

Onboard fire extinguishing system is important to protect cargo and human lives and every oil tanker has foam type fire extinguishing system. Because of environmental problem, agent which contains materials such as Perfluorinated compounds are regulated and the development of the environmental friendly agent is required. The protein foam has less environmental pollution problem and has an excellent fire extinguish performance to oil fire. In the research, bivalency metal salts were added as stabilizer to increase fire resistance and stability of the foam. Ferrous sulfate, Iron chloride and Nickel chloride were used and to adjust to vessel, sea water was applied. As a stabilizer increased, the expansion ratio was raised. However 25% drainage time was decreased over 2.0 wt.% which is knowable that the foam brokes easily. The amount of generated foam was measured to check fluidity of foam and it appeared that when $FeSO_4$ 1.2 wt.% was added, the amount of generated foam reached large and also the 25% drainage time was high. To evaluate the fire extinguishing performance for oil fire, the small scale oil fire test was executed. When $FeSO_4$ 1.2 wt.% was added, fire extinguishing time was in its shortest which informs fluidity of foam and stability are important factors on fire extinguishing efficiency.

• 한국구조물진단유지관리공학회 논문집
• /
• 제20권2호
• /
• pp.60-66
• /
• 2016

본 연구는 실리콘계 정포제의 특성에 따른 폴리우레탄 폼 지수제의 cell 구조와 흡수량 변화를 알아보기 위하여 6종의 정포제를 사용하여 폴리우레탄 폼 지수제를 제조하여 FE-SEM으로 분석한 결과 실리콘 정포제의 실록산 주사슬 말단에 PO n개가 결합되어 있는 DC-193, DC-2585, DC-5125, DC-198의 cell 구조는 close cell로 확인이 되었고, 실리콘 정포제의 실록산 주사슬 말단에 EO n개가 결합 되어 있는 DC-5043과 DC-5598은 open cell 구조로 나타났다. 또한 cell 구조 변화에 따른 흡수량 에서는 close cell의 크기가 가장 세밀하고 균일한 DC-193의 흡수량이 가장 적게 나타나 내수성이 가장 우수한 것으로 나타났으며 open cell의 크기가 가장 크게 형성된 DC-5043의 흡수량이 가장 많은 것으로 나타났다. 이들의 방수성능을 콘크리트 구조물을 모사하여 시험한 결과 누수가 없음을 확인하였다.

• 한국포장학회지
• /
• 제11권1호
• /
• pp.47-52
• /
• 2005

The wasted plastic PC/ABS retainer, polyurethane foam (PUF) and vinyl (PVC) skin. In order to investigate the recycling process, the multi-layered instrument panel Each of materials separated was shredded and crushed to create many small particles respectively. The separation of the foam and skin and retainer of zigzagged air blower. Pilot tests performed at the equipment yielded 98.8% by weight of the available PVC and 99.3% by weight of the available PC/ABS respectively. Secondly, the thermal stabilizer and the compatabilizer have been used to improve the physical propertied of recycled materials.. The properties of recycled PVC materials resulted in about 50% compared to that of virgin materials after treatment by Pb-St thermal stabilizer. In addition, the properties of recycled PC/ABS materials was also obtained about 80% compared to that of virgn materials after treatment by PMMA compatabilizer.

• Preventive Nutrition and Food Science
• /
• 제3권4호
• /
• pp.382-386
• /
• 1998

A soluble dietary fiber, $\beta$-glucan, contained in oat and barley has nutritional benefits such as hypocholesterolemic effects and influences blood glucose regulation. The contents of $\beta$-glucan in both cereals range from 3 to 7% with the exception of a certain barley genotype which contains up to 16% $\beta$-glucan. $\beta$-Glucan is distributed mainly in the cell walls of endosperm and the distal (bran) portion of kernel. Various procedures have been developed for increasing the extraction yield of $\beta$-glucan. Oat gum prepared with weak alkali extractionand alcohol proecipitation following protein removal usually contains 80% $\beta$-glucan.The most commonly used method for $\beta$-glucan quantitiation is an enzymatic procedure combining lichenase plus $\beta$-glucosidase followed by measuring the amount of glucos released by glucose oxidase-peroxidase treatment. The increase in foam-and emulsion-stabilizing capacity of $\beta$-glucan is due to the increase in viscosity of the aqueous phase. Therefore, $\beta$-glucan shows great potentials as a thickener and a stabilizer.

• 한국세라믹학회지
• /
• 제56권5호
• /
• pp.513-520
• /
• 2019

This study reports the improvement of mechanical properties of Al₂O₃ porous ceramics from colloidal suspension with the addition of carbon fiber by direct foaming. The initial colloidal suspension of Al₂O₃ was partially hydrophobized by surfactant to stabilize wet foam with the addition of carbon fiber from 2 to 8 wt% as stabilizer. The influence of carbon fiber on the air content, bubble size, pore size and pore distribution in terms of wet foam stability and physical properties of porous ceramics were discussed. The viscosity of the colloidal suspension was increased giving solid like properties with the increased in carbon fiber content. The mechanical properties of the sintered porous samples were investigated by Hertzian indentation test. The results show the wet foam stability of more than 90% corresponds to compressive loading of 156.48 N and elastic modulus of 57.44 MPa of sintered sample with 8 wt% of carbon fiber content.

• 공업화학
• /
• 제33권4호
• /
• pp.386-393
• /
• 2022

본 연구에서는 실란 커플링제 옥틸트리메톡시실란(octyltrimethoxysilane, OTMS)을 사용하여 친수성 탄산칼슘(CaCO₃) 나노입자의 표면을 개질하였으며, OTMS에 의한 CaCO₃ 나노입자의 표면 개질은 FT-IR, DSC, XRD XPS 및 TGA 분석을 통하여 확인하였다. 또한 부유 시험과 접촉각 측정을 통하여 OTMS 농도가 CaCO₃ 나노입자의 표면 소수성 변화에 미치는 영향에 관하여 살펴보았다. 부유 시험 결과에 따르면 1 wt% OTMS 농도 조건에서 측정한 active ratio 값이 97.0 ± 0.5%로서, OTMS가 CaCO₃ 나노입자 표면을 매우 효율적으로 소수화 개질하는 실란 커플링제임을 알 수 있었다. 또한 OTMS로 개질된 CaCO₃ 나노입자 1 wt%를 함유하는 수용액에 대한 기포 안정성 측정 결과, OTMS 농도가 1 wt%인 조건에서 가장 안정한 기포가 생성되며, 접촉각은 91.8 ± 0.7°임을 확인하였다. 또한 동일한 1 wt% OTMS 농도 조건에서 에멀젼 입자 크기가 가장 작은 안정한 상태의 에멀젼이 형성됨을 확인하였다. 이러한 결과들은 OTMS로 개질된 CaCO₃ 나노입자가 다양한 산업 응용 분야에서 기포 안정화제 및 에멀젼 유화제로서 적용이 가능함을 의미하는 것이다.

• 공업화학
• /
• 제31권1호
• /
• pp.49-56
• /
• 2020

본 연구에서는 실란 커플링제 프로필트리메톡시실란(propyltrimethoxysilane, PTMS)을 사용하여 CaCO₃ 나노입자의 표면을 개질하였으며, 개질된 CaCO₃ 나노입자를 에멀젼 유화제 및 기포 안정화제로의 적용 가능성을 시험하고자 나노입자 표면의 소수성 변화가 기포와 에멀젼의 안정성에 미치는 영향에 관하여 살펴보았다. PTMS에 의한 CaCO₃ 나노입자의 표면 개질은 FT-IR, TGA, DSC 분석을 통하여 확인하였으며, XRD 및 XPS 분석을 통하여 나노입자 표면의 원소 분석을 실행하였다. 또한 부상 시험과 접촉각 측정을 통하여 PTMS 농도가 CaCO₃ 나노입자의 표면 개질에 미치는 영향에 관하여 살펴보았다.

• 공업화학
• /
• 제17권3호
• /
• pp.260-266
• /
• 2006

메모리 기능의 미세 셀 폴리우레탄 폼용 옥시에틸렌변성실록산 계면활성제의 합성을 위해 폴리메틸하이드로겐실록산(D = 75, D' = 15)의 수소작용기에 수소규소화반응을 이용하여 다양한 폴리알킬렌옥사이드를 치환하여 합성하였다. 폴리알킬렌 옥사이드는 에틸렌옥사이드(EO) 또는 EO와 프로필렌옥사이드(PO)의 혼합성분이 반복되는 구조에 말단기는 메틸 또는 하이드록실기를 갖는 물질들을 이용하였다. NMR과 GPC 분석을 이용하여 분자 구조와 분자량 변화를 통하여 합성반응의 진행 여부 및 생성물 수율(98%)을 파악하였다. EO 12 반복단위로 합성된 계면활성제의 첨가량을 0.6~2.0 part per hundred polyol (pphp)까지 증가시켜 메모리 기능의 우레탄 폼 발포에 적용하여 폼의 물리적 특성을 측정한 결과 셀 사이즈(최소 $0.868{\mu}m$), 공기유량(air flow, -78 KPa), 복원시간(recovery time, 8 sec) 등의 결과를 나타내었다.

• 한국세라믹학회지
• /
• 제53권6호
• /
• pp.604-609
• /
• 2016

This study reports on wet-foam stability with respect to porous ceramics from a particle-stabilized colloidal suspension that is achieved through the addition of polymethyl methacrylate (PMMA) using a wet process. To stabilize the wet foam, an initial colloidal suspension of $Al_2O_3$ was partially hydrophobized by the surfactant propyl gallate (2 wt.%) and $SiO_2$ was added as a stabilizer. The influence of the PMMA content on the bubble size, pore size, and pore distribution in terms of the contact angle, surface tension, adsorption free energy, and Laplace pressure are described in this paper. The results show a wet-foam stability of more than 83%, which corresponds to a particle free energy of $2.7{\times}10^{-12}J$ and a pressure difference of 61.1 mPa for colloidal particles with 20 wt.% of PMMA beads. It was possible to control the uniform distribution of the open/closed pores by increasing the PMMA content and by adding thick struts, leading to the achievement of a higher-stability wet foam for use in porous ceramics.

• Journal of the Korean Wood Science and Technology
• /
• 제26권4호
• /
• pp.43-49
• /
• 1998

The availability of large quantities of waste woods provides an impetus for investigating woody biomass potential uses. Polyurethane (PU) foams are prepared with reacting isocyanates and polyols, and are used. in various industry fields. Thus, lignocellulosic waste raw-materials are proposed as replacement for synthetic polyol to PU foam formulation. In this study PU foams were manufactured from liquefied woods, methanediisocyanate(MDI), catalyst, foaming stabilizer, and viscosity aids. The polyol content, isocyanate.hydroxyl group (NCO/OH) ratio, and water content were varied to evaluate their effects on the foaming and water absorption of the PU foams. Less than 400 Molecular weight. of polyethylene glycol(PEG) and 1 to 3 solvent to woody raw-material ratio were desirable for liquefying woody materials. Liquefying rate was increased with more than 3 % addition of inorganic and organic catalysts and raising reaction temperature more than $150^{\circ}C$. Addition of starch enhanced liquefying of woody materials. Fourty percents of starch resulted in about 90% liquefying rates. Foaming rates were increased with increasing moisture contents of liquefied wood. Moisture contents of 0.6% resulted in 5 time-foaming rates, and seven percents of moisture contents more than 30 time-foaming rates. But, an increase in water content may result in a decrease in cross-links between wood polyol and isocyanate, because the NCO/OH ratio is constant. Increasing moisture contents have significantly decreased density of PU foams. The optimum water content should be about 2.5% or less in this adopted condition.