• Journal of the Korean Ceramic Society
• /
• v.49 no.3
• /
• pp.236-240
• /
• 2012

The reticulated carbon foam have been used for their excellent properties in terms of thermal management which is getting important in industrial field currently. In this study, we measure the mechanical properties of the reticulated carbon foam which is heat-treated at various temperature from the prepared low-density phenol foam. Simultaneously, we observe microstructures with high resolution transmission microscope and measure the residual oxygen content of carbon foams to figure out the relationship between the apparent change of properties such as weight loss and linear shrinkage during heat treatment. In conclusion, the carbon foam heat-treated at $1400^{\circ}C$ shows the highest strength, and the mechanical behavior is believed to be strongly related to the creation of nano-size graphite crystals from the amorphous carbon during heat treatment. On the other hand, it is turned out that the weight loss occurred at the temperature under $1400^{\circ}C$ comes from the elimination of oxygen in the form of $CO_2$ or CO, but no evidence is found on weight loss mechanism at the temperature above $1400^{\circ}C$.

• 한국생물공학회:학술대회논문집
• /
• 2003.04a
• /
• pp.289-292
• /
• 2003

Effects of immobilization on the production of human granulocyte-macrophage colony-stimulating factor (hGM-CSF) by Nicotiana tabacum cells were investigated using alginate and polyurethane foam as immobilization matrices. Encapsulation of the cells in alginate decreased protein production by 50% compared with that of suspension culture. Maximum hGM-CSF concentration was obtained by the cells immobilizaed in polyurethane foam. High hGM-CSF production could be possible when polyurethane foam was used because of high specific production and easy immobilization for cell recycling process with high cell density.

• Journal of the Korean Society of Industry Convergence
• /
• v.10 no.2
• /
• pp.73-80
• /
• 2007

The preparation of oil absorbent using waste polyurethane was studied. And the effects of shape, size, and contents of waste polyurethane foam was investigated. The waste foam was treated in shape of powder, cube and bar type generated from rigid sandwich panel process. The tests for flexural strength, combustibility, and water absorptivity were carried out to investigate the mechanical and physical properties of the recycled foams. And the cell microstructure was evaluated through Scanning Electron Micrograph. The recycled foam containing powder-shaped underfilled and showed poor properties that was generated through reactivity of the resins and increasing of slurry viscosity. For the recycled foam with the cube and bar-shaped, the underfilling was caused by interference between the waste PUFs and increasing surface areas of PUF. Low cell density, non-uniformity of cell shape and size, and low adhesion of the boundary surface (new/recycled) was showed as a result of the poor properties. Considering underfilling and the properties of PUF (new/recycled), maximum recycle contents were less than 20 wt% for the powder and above 40 wt% for the cube and bar.

• The Journal of Korean Physical Therapy
• /
• v.27 no.4
• /
• pp.270-274
• /
• 2015

Purpose: The purpose of this study was to examine the electromyographic (EMG) activity of the abdominal muscles and to compare the activity ratios of the bilateral rectus abdominis (RA) to oblique abdominal muscles during shoulder abduction in opposite directions with single leg raising (SLR) performed in the supine position on a foam roller. Methods: Fifteen healthy subjects were recruited to the study. Each subject lay on the foam roller and performed left single leg raising with right or left shoulder $90^{\circ}$ abduction (Abd); performed in a random order. Surface EMG recordings of selected abdominal muscles (i.e., the RA, external oblique abdominis [EO], internal oblique abdominis [IO], and transverse abdominis [TrA]) were normalized to maximum voluntary isometric contraction. EO/RA and IO and TrA/RA ratios were determined with surface EMG. Data were analyzed by Independent t-test. The statistical significance level was p<0.05. Results: The results were as follows: (1) the right RA, left EO, and right IO and TrA muscle activities increased significantly at the left SLR with left Abd compared to the left SLR with right Abd (p<0.05); and (2) the ratio of right EO/RA activity increased significantly at the left SLR with right Abd compared to left Abd (p<0.05). Conclusion: These findings suggest that left SLR with left Abd on a foam roller is an appropriate exercise for activation of specific oblique abdominal muscles.

• Journal of International Academy of Physical Therapy Research
• /
• v.8 no.2
• /
• pp.1182-1189
• /
• 2017

The purpose of this study was conducted with senior women of ages 65 in Community Center to identify effective exercise methods for preventing falling accidents by enhancing balancing skills through aerobic and foam roller exercise programs. There were 24 subjects : 11 aerobics group and 13 foam roller group. 30 minute exercise programs were conducted against both groups 12 times 6 weeks. Various tests, including Time up and go test, Forward reach test, One-leg standing with eyes open/closed and Y-Balance were conducted prior to commencing the exercise program. Wilcoxon's Signed-ranks test was executed to analyze the changes in balance of the aerobic and foam roller exercise group prior to and after the experiment, and Mann-Whitney test was executed to compare the difference between the two groups. The Y-Balance(post. medial) show statistically significant differences in the amount of change before and after exercise between the two groups, except for Timed up and go test, Forward reach test, Y-Balance(ant.), and Y-Balance(post. lateral), which did not showed statistically significant difference (p<0.05). Foam roller exercises are effective methods to enhance the balancing skills in senior women to prevent falling accidents.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.734-738
• /
• 2017

In the present study, dominant factors for temperature increase and effects of mass entering the resonance tube of the gas-dynamic igniter are investigated. Using RhoCentralFoam solver in OpenFOAM program, numerical simulation is performed for three different cases. In the results, the heating of the working fluid is found to be a result from aero-thermodynamic phenomena. Appropriate mass entering to the resonance tube is found to be an important dominant factor as well.

• Nuclear Engineering and Technology
• /
• v.56 no.2
• /
• pp.611-623
• /
• 2024

The ISP-47 TOSQAN experiment was analyzed with containmentFOAM which is an open-source CFD code based on OpenFOAM. The containment phenomena taking place during the experiment are gas mixing, stratification and wall condensation in a mixture composed of steam and non-condensable gas. The k-ω SST turbulence model was adopted with buoyancy turbulence models. The wall condensation model used is based on the diffusion layer approach. We have simulated the full TOSQAN experiment which had a duration 20000 s. Sensitivity studies were conducted for the buoyancy turbulence models with SGDH and GGDH and there were not significant differences. All the main features of the experiments namely pressure history, temperature, velocity and gas species evolution were well predicted by containemntFOAM. The simulation results confirmed the formation of two large flow stream circulations and a mixing zone resulting by the combined effects of the condensation flow and natural convection flow. It was found that the natural convection in lower region of the vessel devotes to maintain two large circulations and to be varied the height of the mixing zone as result of sensitivity analysis of non-condensing wall temperature. The computational results obtained with the 2D mesh grid approach were comparable to the experimental results.

• Steel and Composite Structures
• /
• v.29 no.3
• /
• pp.301-308
• /
• 2018

Properties of AFS vary with the changes in the face-sheet materials. Hence, the performance of AFS can be optimized by selecting face-sheet materials. In this work, three types of face-sheet materials representing elastic-perfectly plastic, elastic-plastic strain hardening and purely elastic materials were employed to study their effects on the flexural behavior and failure mechanism of AFS systematically. Result showed face-sheet materials affected the failure mechanism and energy absorption ability of AFS significantly. When the foam cores were sandwiched by aluminum alloy 6061, the AFS failed by face-sheet yielding and crack without collapse of the foam core, there was no clear plastic platform in the Load-Displacement curve. When the foam cores were sandwiched by stainless steel 304 and carbon fiber fabric, there were no face-sheet crack and the sandwich structure failed by core shear and collapse, plastic platform appeared. Energy absorption abilities of steel and carbon fiber reinforced AFS were much higher than aluminum alloy reinforced one. Carbon fiber was suggested as the best choice for AFS for its light weight and high performance. The versus strength ratio of face sheet to core was suggested to be a significant value for AFS structure design which may determine the failure mechanism of a certain AFS structure.

• Journal of the Korean Society of Safety
• /
• v.33 no.2
• /
• pp.8-13
• /
• 2018

The light weight composite materials have been replacing in high performance structures. The object of this study is to examine the effects of the initial crack location about a delamination in a PVC foam cored sandwich composite that is used for the strength improvement of structures. The initial crack location and fiber laminates thickness were changed with several types. The MMB specimen was used for evaluating the fracture toughness and crack behaviors. The material used in the experiment is a commercial twill carbon prepreg in CFRP material and Airex in PVC foam core. Sandwich laminate composites are composed by PVC foam core layer between CFRP face sheets. The face sheets were fabricated as 2 types of 5 and 8 plies. The initial cracks were located in a PVC form core and the interface of upper CFRP sheet. From the results, the crack initiation was affected with the location of the initial crack inserted in the PVC foam core. Among them, the initial crack at 1/3 of the upper part of the PVC foam core was the most rapid progression. And the critical energy release rate was $0.40kJ/m^2$, which is the lowest value when the initial crack was inserted into the interface between a PVC foam core and CFRP laminated with 5 plies. Meanwhile, the highest value of $1.27kJ/m^2$ was obtained when the initial crack was located at the center line in case of the 8 plies.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.28 no.5
• /
• pp.599-606
• /
• 1995

The feasibility of foam separation to remove protein produced from fish culture water was investigated, By assuming foam separation column as a single well-mixed pool, a simplified model for foam separator conditions was alse studied under the batch operation. The model indicated that the protein removal could be described as a first-order reaction whose rate increases with both superficial air velocity and protein concentration in the bulk solution. from ,the results of an experimental study on the effects of superficial air velocity, the protein concentration, temperature, and pH on protein removal, the superficial air velocity and initial protein concentration in bulk solution were found to be important operational factors. Other experimental results important that foam separator operated under batch conditions would be considered as a completely mixed reactor. The protein removal rate by foam separation process was increased proportionally with the superficial air velocity, and the adsorptive removal rate of protein was found to obey Langmuir adsorption formula. The preposed simplified model was verified with the experimental data obtained from this study. Under the experimental range used, both temperature and pH did not affect the protein removal.