• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.6
• /
• pp.2846-2851
• /
• 2012

Effects of ground tire rubber(GTR) and unexpanded $Expancel^{(R)}$ powders on the thermal conducting characteristics of rigid polyurethane foams(PUFs) were studied. Sub-micron sized GTR powders and $Expancel^{(R)}$ powders were used as the foam nucleating agents to improve the thermal insulating properties of the rigid PUFs. As the results, while the thermal conductivities of the GTR filled-PUF samples were increased linearly with GTR contents, those of $Expancel^{(R)}$ filled-PUF samples were decreased a little bit. It was considered from the results that GTR powders might predominantly play a role as the extending fillers. On the other hand, $Expancel^{(R)}$ powders could act as the foam nucleating agents based on the polar surface, showing smaller cell sized PUF with improved insulating characteristics.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.22 no.6
• /
• pp.743-752
• /
• 1993

To elucidate the effects of natural gums, i.e. carrageenan, locust bean gum and xanthan gum and synthetic gums, i.e. carboxymethyl cellulose(CMC) and methyl cellulose(MC) on the foaming properties of sodium caseinate, surface tension, absolute viscosity, turbidity, foaming ability, foam stability, and heat stability of the foams of the caseinate solutions with added gums were examined. The surface tension of sodium caseinate solution(5%) adding to gums at pH 4.0 and 5.0 were higher than those at pH 7.0 and 8.0. The viscosities of the solutions adding to gums(0.1, 0.2, 0.3 and 0.5%) ap pH 4.0, 5.0, 7.0 and 8.0 were 2.4~170.0, 2.5~190.0, 5.3~180.0 and 6.3~99.0 cps, respectively. Especially xanthan gums predominantly increased the viscosity. Turbidities were 97.3~98.2 at pH 4.0 and 5.0 and 93.0~95.8 at pH 7.0 and 8.0. Foaming abilities of the solution adding to xanthan gum, carrageenan and locust bean gum were increased, while those of CMC and MC were decreased. Additions of xantham gum, CMC and MC increased the foam stability, especially xanthan gum did predominantly. Xanthan gum, MC and locust bean gum were more effective than CMC and carrageenan for heat stability. For improving the foaming properties of sodium caseinate xanthan gum were best of five kinds of gums. Surface tensions and turbidities of the solution were related to foaming ability, and the viscosities were related to foam stability and heat stability.

• Journal of Powder Materials
• /
• v.26 no.3
• /
• pp.231-236
• /
• 2019

Ni hydroxides ($Ni(OH)_2$) are synthesized on Ni foam by varying the hexamethylenetetramine (HMT) concentration using an electrodeposition process for pseudocapacitor (PC) applications. In addition, the effects of HMT concentration on the $Ni(OH)_2$ structure and the electrochemical properties of the PCs are investigated. HMT is the source of amine-based $OH^-$ in the solution; thus, the growth rate and morphological structure of $Ni(OH)_2$ are influenced by HMT concentration. When $Ni(OH)_2$ is electrodeposited at a constant voltage mode of -0.85 V vs. Ag/AgCl, the cathodic current and the number of nucleations are significantly reduced with increasing concentration of HMT from 0 to 10 mM. Therefore, $Ni(OH)_2$ is sparsely formed on the Ni foam with increasing HMT concentration, showing a layered double-hydroxide structure. However, loosely packed $Ni(OH)_2$ grains that are spread on Ni foam maintain a much greater surface area for reaction and result in the effective utilization of the electrode material due to the steric hindrance effect. It is suggested that the $Ni(OH)_2$ electrodes with HMT concentration of 7.5 mM have the maximum specific capacitance (1023 F/g), which is attributed to the facile electrolyte penetration and fast proton exchange via optimized surface areas.

• Ecology and Resilient Infrastructure
• /
• v.5 no.4
• /
• pp.199-209
• /
• 2018

In river design, consideration of bed shear stresses is necessary to secure stability of levee and floodplain. In this study distributions of bed shear stresses in compound open channels are analyzed through numerical simulation for various width and depth. LES solver in OpenFOAM is applied to 12 cases of compound channel shapes considering secondary flow which effects distributions of bed shear stresses. By the results time averaged velocity distributions, secondary currents, and distributions of bed shear stresses are analyzed. Overall distributions of bed shears in floodplain show that higher shear stresses are seen in left of floodplain and the shears decrease toward right of floodplain. However, high local variations in shear stresses are shown due to the secondary flow effects. In shallow floodplain, bed shear stresses show low value below 0.8 times of averaged bed shear. In deep floodplain, bed shear stresses show high value over 1.2 - 1.4 times of averaged bed shear.

• International Journal of Advanced Culture Technology
• /
• v.3 no.1
• /
• pp.21-30
• /
• 2015

Ceramic foams are prepared as positive images corresponding to a plastic foam structure which exhibits high porosities (85-90%). This structure makes the ceramic foams attractive as a catalyst in a dry reforming process, because it could reduce a high pressure drop problem. This problem causes low mass and heat transfers in the process. Furthermore, the reactants would shortly contact to catalyst surface, thus low conversion could occur. Therefore, this research addressed the preparation of dry reforming catalysts using a sol-gel catalyst preparation via a polymeric sponge method. The specific objectives of this work are to investigate the effects of polymer foam structure (such as porosity, pore sizes, and cell characteristics) on a catalyst performance and to observe the influences of catalyst preparation parameters to yield a replica of the original structure of polymeric foam. To accomplish these objectives industrial waste foams, polyurethane (PU) and polyvinyl alcohol (PVA) foams, were used as a polymeric template. Results indicated that the porosity of the polyurethane and polyvinyl alcohol foams were about 99% and 97%. Their average cell sizes were approximate 200 and 50 micrometres, respectively. The cell characteristics of polymer foams exhibited the character of a high permeability material that can be able to dip with ceramic slurry, which was synthesized with various viscosities, during a catalyst preparation step. Next, morphology of ceramic foams was explored using scanning electron microscopy (SEM), and catalyst properties, such as; temperature profile of catalyst reduction, metal dispersion, and surface area, were also characterized by $H_2-TPR$ and $H_2-TPD$ techniques, and BET, respectively. From the results, it was found that metal-particle dispersion was relatively high about 5.89%, whereas the surface area of ceramic foam catalysts was $64.52m^2/g$. Finally, the catalytic behaviour toward hydrogen production through the dry reforming of methane using a fixed-bed reactor was evaluated under certain operating conditions. The approaches from this research provide a direction for further improvement of marketable environmental friendly catalyst production.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.10a
• /
• pp.289-292
• /
• 2001

Aluminium foams, having a closed cell structure, fabricated by applying the powder compact method and an induction heating were studied. The powdered A6061 mixed with the powdered titanium hydride as a foaming agent was hot pressed into a foamable precursor. The resulting precursor was foamed by induction heating up to desired temperature. The effects of the titanium hydride content ($0.3{\~}1.5 wt.\%$), pressing pressure of the foamable precursor material (50-150kN), the forming temperature ($610{\~}690^{\circ}C$) and heating rate during foaming on the expansion behavior of the foam were investigated.

• Journal of Korea Foundry Society
• /
• v.36 no.5
• /
• pp.153-158
• /
• 2016

The lost foam casting process was used to fabricate Al-Si-Mg cast specimens, and the effects of the chemical composition and process variables on the tensile properties and the mold filling ability were investigated. Some porosity formation was observed in thick sections of the casting and better tensile properties were obtained for thin sections, presumably because of their lower porosity and the higher cooling rate. Tensile properties were not clearly enhanced by grain refining treatment with Ti; however, the elongation was significantly improved by Sr modification of the Al-Si-Mg alloy. The mold filling distance was generally proportional to the pouring temperature of the melt, and the distance was also increased by the addition of Ti.

• Macromolecular Research
• /
• v.16 no.5
• /
• pp.467-472
• /
• 2008

Rigid polyurethane foams (RPUFs) were fabricated from crude MDI (CMDI) and polypropylene glycols (PPGs) of various isocyanate indices with a physical blowing agent (HFC 365mfc). There was a tendency for the gel time to decrease and the tack-free time to increase with increasing index value. With increasing index value the foam density and compression strength decreased and the glass transition temperature, dimension stability and thermal insulation increased, while the cell size and closed cell content were virtually unchanged. Allophanate crosslinks and condensation reactions between the isocyanate groups, which are favored with a high index value, exerted significant effects on the properties of RPUFs.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.29 no.1
• /
• pp.76-79
• /
• 2000

The effects of packaging conditions on freshness extension of squash (Cucurbita moscata) were investigated during 7-day storage at 2$0^{\circ}C$. Weight loss of squash packed with corrugated paperboard box (control) was 5.5%, and those of LDPE (low density polyethylene, Ф0.02 mm), LDPE (Ф0.04mm) film and EPS (expanded polystyrene) box were 0.9%, 0.8%, and 1.1%, respectively. Firmness of EPS was 11% higher than that of control, chlorophill content of squash packed with EPS box was 18.9% higher, and total ascorbic acid content of squash packed with EPS box was 29.4% higher than that of control. Quality of packed squash was not different between EPS packages and LDPE packages. Decay of control was 1~2 pieces per box, but was not found in the LDPE, EPS box. Preferences in overall appearences of LDPE, EPS box was better than those of control.

• Textile Coloration and Finishing
• /
• v.17 no.6 s.85
• /
• pp.36-41
• /
• 2005

The effects of low temperature plasma treatment on the properties of three types of foams, polyurethane(PU), injection phylon(IP), and phylon(PH) that used for footwear mid-sole were examined. The change of surface properties of foams were characterized by electron scanning microscope, contact angle measurement, and universal testing machine. Adhesion was tested by T-peel tests of plasma treated foams/polyurethane adhesive joints. The contact angle of three types of foams were decreased dramatically with the plasma treatment time, specifically noticeable in the case of phylon(Ph). It has shown the relationship with the contact angle of phylon(PH) and the distance between electrode and samples. The peel strength of foams were increased with the increase of plasma treatment time.