• Structural Engineering and Mechanics
• /
• 제85권3호
• /
• pp.289-304
• /
• 2023

The main objective of this paper is to study the effect of porosity on the buckling behavior of thick functionally graded sandwich plate resting on various boundary conditions under different in-plane loads. The formulation is made for a newly developed sandwich plate using a functional gradient material based on a modified power law function of symmetric and asymmetric configuration. Four different porosity distribution are considered and varied in accordance with material propriety variation in the thickness direction of the face sheets of sandwich plate, metal foam also is considered in this study on the second model of sandwich which containing metal foam core and FGM face sheets. New quasi-3D high shear deformation theory is used here for this investigate; the present kinematic model introduces only six variables with stretching effect by adopting a new indeterminate integral variable in the displacement field. The stability equations are obtained by Hamilton's principle then solved by generalized solution. The effect of Pasternak and Winkler elastic foundations also including here. the present model validated with those found in the open literature, then the impact of different parameters: porosities index, foam cells distribution, boundary conditions, elastic foundation, power law index, ratio aspect, side-to-thickness ratio and different in-plane axial loads on the variation of the buckling behavior are demonstrated.

• Biomolecules & Therapeutics
• /
• 제26권2호
• /
• pp.121-129
• /
• 2018

Oxidized low-density lipoprotein (ox-LDL)-induced macrophage foam cell formation and apoptosis play critical roles in the pathogenesis of atherosclerosis. Thioredoxin-1 (Trx) is an antioxidant that potently protects various cells from oxidative stress-induced cell death. However, the protective effect of Trx on ox-LDL-induced macrophage foam cell formation and apoptosis has not been studied. This study aims to investigate the effect of recombinant human Trx (rhTrx) on ox-LDL-stimulated RAW264.7 macrophages and elucidate the possible mechanisms. RhTrx significantly inhibited ox-LDL-induced cholesterol accumulation and apoptosis in RAW264.7 macrophages. RhTrx also suppressed the ox-LDL-induced overproduction of lectin-like oxidized LDL receptor (LOX-1), Bax and activated caspase-3, but it increased the expression of Bcl-2. In addition, rhTrx markedly inhibited the ox-LDL-induced production of intracellular reactive oxygen species (ROS) and phosphorylation of p38 mitogen-activated protein kinases (MAPK). Furthermore, anisomycin (a p38 MAPK activator) abolished the protective effect of rhTrx on ox-LDL-stimulated RAW264.7 cells, and SB203580 (a p38 MAPK inhibitor) exerted a similar effect as rhTrx. Collectively, these findings indicate that rhTrx suppresses ox-LDL-stimulated foam cell formation and macrophage apoptosis by inhibiting ROS generation, p38 MAPK activation and LOX-1 expression. Therefore, we propose that rhTrx has therapeutic potential in the prevention and treatment of atherosclerosis.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1367-1370
• /
• 2005

Microcellular foam processing of polymers requires a nucleated cell density greater than $10^9\;cells/cm^3$ so that the fully grown cells are smaller than 10 mm. A microcellular foam can be developed by first saturating a polymer sample with a volatile blowing agent, followed by rapidly decreasing its solubility in the polymer. In general, the cellular structure of crystalline polymer foams is difficult to control, compared to that of amorphous polymer foams. Since the gas does not dissolved in the crystallites, the polymer/gas solution formed during the microcellular processing is nonuniform. Moreover, the bubble nucleation is nonhomogeneous because of the heterogeneous nature of the crystalline polymer. In this paper, the effects of the crystallinity and morphology of crystalline polymers on the microcellular foam processing and on reflectivity of products are investigated. First, polymer specimens with various morphology and amount of solved blowing agent were prepared by varying the saturation pressure, saturation time and foaming condition. Then, cell morphologies according to several conditions were studied. The specimens with differing gas amount of solved and morphologies were foamed and their cellular structures were compared. The experimental results of reflectivity are compared to raw specimen and another specimen of different experimental conditions. After the experiments, recognize whether how reflectivity changes according to solved gas amount. And the effect of cell density and cell size on reflectivity is studied

• 한국식품영양과학회:학술대회논문집
• /
• 한국식품영양과학회 2004년도 Annual Meeting and International Symposium
• /
• pp.265-270
• /
• 2004

Coronary heart disease (CHD) has been the number one killer in western society for a long time, and CHD in most instances is due to atherosclerosis. One of the earliest events in atherogenesis is the intracellular accumulation of lipids, particularly cholesterol esters, in the aortic intima. The lipids presumably came from the uptake of plasma lipoproteins, particularly from LDL. These foam cells were identified as being predominantly as macrophages. Currently, it is believed that oxidation of low density lipoprotein (LDL) might contribute to the generation of foam cells. An outcome of the oxidation hypothesis is that the consumption of antioxidants would be beneficial. In this study, Boldine, an alkaloid of Peumus boldus was tested for their antioxidant potency both in, in vitro oxidation system and in mouse models. Boldine decreased the ex-vivo oxidation of Low-density lipoprotein (LDL). In vivo studies were performed to study the effect of these compounds on the atherosclerotic lesion formation in LDL r-/- mice. Three groups of LDL r-/- mice (N=12 each) were fed an atherogenic diet. Group 1 was given vehicle and group 2 and 3 were given 1 and 5 mg of Boldine/day in addition to the atherogenic diet. The results indicated that there was a decrease in lesion formation reaching a 40% reduction due to Boldine compared to controls. The in vivo tolerance of Boldine in humans (has been used as an herbal medicine in other diseases) should make it an attractive alternative to vitamin E.

• 폴리머
• /
• 제24권4호
• /
• pp.538-544
• /
• 2000

폴리프로필렌 수지를 연속공정으로 발포시킬 때의 공정 변수에 따른 발포체의 구조와 셀 형성에 관한 특성을 연구하였다. 본 실험에서 고려된 발포 공정 변수들은 발포제 함량, 핵제 함량, 다이 온도, 그리고 다이의 치수였다. 셀이 붕괴없이 성장하는데 있어서 발포제인 이소펜탄의 함량은 약 14.5 wt% 이하이었고, 그 이상의 발포 가스가 주입되었을 때에는 압출물이 팽창하는 가스 압력을 극복하지 못하여 셀이 붕괴되는 현상이 나타나며 불안정한 셀 구조를 형성하였다. 핵제는 1 wt%의 소량만으로도 핵제 없이 발포제만으로 생산된 발포체에 비해 약 1/7로 밀도가 감소하였고 셀 밀도는 핵제의 함량에 따라 4배 이상까지 비례하여 증가하였다. 또한, 본 실험에서 상대적으로 낮은 다이 온도였던 17$0^{\circ}C$에서 안정한 셀 구조를 형성하였다. 그러나, 다이 치수를 변화시켜 유도한 압력 감소 속도의 효과는 본 실험에서 두드러지게 나타나지 않았다.

• KSBB Journal
• /
• 제8권3호
• /
• pp.282-286
• /
• 1993

회분식 포말분리관에 효모용액을 충전하여 효모분리실험을 수행하며 효모 액면 높이, 질소 공급량, 효모농도, pH와 온도 및 $CaCl_2$ 첨가 등의 변화에 따른 포말 분리관의 분리 및 특성 등을 연구하였다. 액면 높이가 20cm인 경우 최대 효모분리비 70.6을 얻을 수 있었고 포말 생성시간도 6분으로 가장 길었다. 질소 공급량이 120ml/min인 경우 3분 분리운전후 액본체 효모의 90~94%가 제거되어 매우 신속하고 효과적인 분리법이었다. 효모농도가 3.92~8.4g/l 범위가 pH가 5~7 범위에서 분리시간에 따른 효모 제거율은 비슷하였다. 효모용액의 온도가 26~$36^{\circ}C$ 범위에서 온도가 상승할수록 분리시간에 따른 효모 분리비가 증대하였다. 효모의 응집성을 증대하는 $CaCl_2$ 농도는 0.2g/l일 때 효모 분리비가 가장 높았다.

• 소성∙가공
• /
• 제20권7호
• /
• pp.518-523
• /
• 2011

The three dimensional geometries of an aluminum open cell foam before and after uniaxial compressive loading were investigated using the X-ray micro CT(computed tomography). Aluminum 6101-T6 open cell foams of 10, 20, 40 ppi (pore per inch) were considered in this work. After the serial sectioning CT images of aluminum foams were obtained from non-destructive X-ray images, the exact 3D structure were reproduced and visualized with commercial image processing program. The relative density ratio was around the 7.0 to 9.0 range, the unit cells showed anisotropic shapes having the different dimensional ratios of 1.1 to 1.3 between the rise and the transverse directions. The yield stress increased with the relative density ratio and the volumetric strain increased proportionally with compressive strain. The plateau stress in the compressive stress-strain curve was caused by the buckling of ligaments.

• 한국미생물·생명공학회지
• /
• 제22권6호
• /
• pp.646-650
• /
• 1994

Aspergillus terreus NRRL 1960 was immobilized on various alginate gel beads, Celites, and polyurethane foam cubes, and the comparisons were made for the production of itaconic acid according to the types and sizes of each carrier. The levels of itaconic acid produced from Ca- alginate and Sr-alginate were similar, and the addition of bentonite to Ca- and Sr-alginate resulted in an increase of itaconic acid. The addition of 1.67% bentonite and 0.33% starch to Sr-alginate (SABS bead) produced higher level of itaconic acid (11.59 g/1) than other gel beads. A decrease in the size of Celite increased the itaconic acid production, and the smallest size of Celites, R- 634, produced 6.37 g/l of itaconic acid. Among various types of polyurethane foam cubes, HR 08 (2X2X2 cm) produced about 19 g/l of itaconic acid, which was more efficient than other carriers. In a repeated batch culture using immobilized cells on polyurethane foam cubes (HR 08, 2X2X2 cm), the stability of itaconic acid production was maintained up to 4 batches. Also, the possibility of itaconic acid production by continuous culture was shown in a packed-bed reactor.

• 한국응용과학기술학회지
• /
• 제38권5호
• /
• pp.1219-1228
• /
• 2021

친환경적 바이오 계면활성제의 하나인 람노리피드(rhamnolipid)의 제조는 Pseudomonas aeruginos 계열의 박테리아가 가장 많이 사용되며, 바이오 공정을 통해 생산된다. 람노리피드의 화학구조는 rhamnose당과 𝛽-hydroxylated fatty acid의 결합으로 이루어져 있으며, 바이오 공정을 통해 동질체 혼합물 형태로 생산된다. 발효(fermentation)공정 중 거품 제어가 수율을 결정하는 가장 중요한 요인으로 알려져 있다. 본 논문에서는, 박테리아 내부에서 일어나는 람노리피드 합성 메카니즘을 소개하였고, 발효공정에서 문제점으로 인식되었던 거품 제어 방법에 대한 최근 시도들을 살펴보았다. 10년 전과 비교하여, 람노리피드 양산화 가능성은 빠르게 높아지고 있다. 특히, 람노리피드와 같은 바이오 계면활성제는 의약품과 같은 고부가가치 제품으로 응용된다면, 시장의 요구가 더 커질 것으로 기대한다.

• Restorative Dentistry and Endodontics
• /
• 제13권2호
• /
• pp.283-294
• /
• 1988

The purpose of this study was to investigate the characteristic features of the cells and tissues of the chronic periapical lesions using light microscope and electron microscope. Fifteen dental periapical lesions were obtained from the patients undergoing periapical surgery. Each specimen was divided into two parts along the tooth axis. One part was routinely processed for histopathologic examinations. 12 periapical lesions were diagnosed as granuloma and 3 periapical specimens as periapical cyst. The other part was fixed in 2.5% glutaraldehyde in 0.1M sodium cacodylate buffer at pH 7.4 and 1% osmic acid in same buffer. They were embedded in Epon 812. The semithin sections were used for the orientation of the lesions and the ultrathin sections were stained conventionally and examined with AEI Corynth 500 electron microscope. The results were as follows. 1. PMN and macrophages, which were dominant cell type, were scattered in small or large numbers throughout the central destructive area of granuloma. In the granulomatous area, plasma cells and lymphoytes were found in significant number and a lot of new capillary formation were revealed. Clefts caused by cholesterol were often seen in the connective tissue. Occasionally foam cells became collected in groups and epithelial proliferation were present. 2. In both granuloma and cyst, some plasma cells contained narrow cisternae of granular endoplasmic reticulum of which was tightly packed with electron dense materials, and other cells exhibited dilated profiles of granular endoplasmic reticulum. 3. In the area where plasma cells and lymphocytes were collected in groups, lymphocytes with well developed nucleolus and profuse cytoplasm were found and differentiating plasma cells were also present. 4. In the epithelial strands of the granulomatous area, epithelial cells contained enlarged endoplasmic reticulum, tonofilaments and ribosoms. Toward the intercellular space epithelial cells protruded a few microvilli. In the intercellular space, exudate-like electron dense materials, most of which was attached to the plasma membrane, appeared. 5. Some foam cells filled with numerous lipid droplets and others had lipid droplets and crystal-like structures. 6. Cyst epithelium consisted of bright cells and dark cells. The former had bright cytoplasm and small amounts of ribosoms, and the latter dark cytoplasm, many ribosoms, mitochondria and elongated microvilli. 7. Epithelial cells near the cyst lumen protruded a lot of long microvilli toward intercellular space and cyst lumen.