• 설비공학논문집
• /
• 제18권9호
• /
• pp.687-697
• /
• 2006

The air and water flow distribution are experimentally studied for a heat exchanger composed of round headers and 10 flat tubes. The effects of tube protrusion depth as well as mass flux, and quality are investigated, and the results are compared with the previous 30 channel results. The flow at the header inlet is annular. For the downward flow configuration, the water flow distribution is significantly affected by the tube protrusion depth. For flush-mounted geometry, significant portion of the water flows through frontal part of the header. As the protrusion depth increases, more water is forced to the rear part of the header. The effect of mass flux or quality is qualitatively the same as that of the protrusion depth. Increase of the mass flux or quality forces the water to rear part of the header. For the upward flow configuration, different from the downward configuration, significant portion of the water flows through the rear part of the header. The effect of the protrusion depth is the same as that of the downward flow. As the protrusion depth increases, more water is forced to the rear part of the header. However, the effect of mass flux or quality is opposite to the downward flow case. As the mass flux or quality increases, more water flows through the frontal part of the header. Compared with the previous thirty channel configuration, the present ten channel configuration yields better flow distribution. Possible explanation is provided from the flow visualization results.

• 한국자기학회지
• /
• 제19권2호
• /
• pp.67-73
• /
• 2009

지하에 존재하는 빈 공간이 지상에서의 자속밀도 변화에 미치는 영향을 땅의 밀도와 측정높이에 따른 변화의 차이로 분석하였다. 밀도가 다른 지표면과 함몰지 및 지하터널이 있는 지표면에 대한 지자기의 자속밀도 분포를 플럭스게이트형 마그네토미터를 사용하여 조사하였다. 지하의 밀도가 감소하거나 빈 공간이 존재하면 지상에서의 자속밀도가 감소하는데, 경계에서부터 서서히 감소하여 중심부에서 가장 낮은 자속밀도를 나타낸다. 빈 공간에 의한 자속밀도의 감소는 지하 80m에 위치한 터널에 의해서도 관찰된다. 이러한 자속밀도 감소현상을 이용하면 지하의 천부에 존재하는 빈 공간, 저밀도 지역, 파쇄대 및 함몰지를 탐사할 수 있을 것으로 보인다.

• Nuclear Engineering and Technology
• /
• 제24권3호
• /
• pp.319-328
• /
• 1992

일차원 구에서 유한요소법의 Galerkin formulation이 일차형태의 단일 에너지 중성자 수송방정식의 적분법에 적용되었다. 구분적으로 1차 혹은 2차인 Lagrange 다항식들이 선형대수 방정식들의 집합을 만들기 위해 적분법에 있는 각의존 중성자속(angular flux)에 대하여 활용되었다. 수치해석이 균질구에서의 임계문제와 비균질구에서의 scalar flux 분포에 대해서 행해졌다. 공간과 각에 대하여 연속적인 유한요소를 사용한 균질구에서의 임계문제에 대한 유한요소법의 결과들은 이론적인 해들자 비교되었다. 비균질 문제에서는 각자 공간에 대하여 불연속 유한요소를 사용하여 구한 scalar flux 분포는 ANISN code에 의한 계산결과와 잘 일치하였다.

• 한국해양학회지:바다
• /
• 제9권4호
• /
• pp.153-163
• /
• 2004

In order to estimate the nutrient flux of the Seomjin River into the coastal waters of South Sea, and to understand the estuarine reactions during mixing between river water and seawater, we collected surface water along the salinity gradient in the Seomjin River estuary from Mar. 1999 to Apr. 2001. We found that nitrate and silicate were delivered by fluvial input, while phosphate was, supplied from disposed wastes in the Gwangyang Bay. Mean annual flux of dissolved inorganic nitrogen (DIN), phosphate and silicate into the Gwangyang Bay was estimated 10.9 molesㆍsec$^{-1}$(4,820 tonnesㆍyr$^{-1}$), 0.07 molesㆍsec$^{-1}$(68 tonnesㆍyr$^{-1}$), 13.3 molesㆍsec$^{-1}$(11,747 tonnesㆍy$^{-1}$), respectively. An evident removal of phosphate, silicate and ammonium at the mid-salinity zone during the dry season was attributed to the active uptake of phytoplankton, and consequently nutrient flux into the Gwangyang Bay was low. Whereas, during the flood season in summer, conservative or additional distribution of the nutrients was observed in the estuary. As a rsult nutrient flux into the Gwangyang Bay was maintained high. High concentrations of chlorophyll a and the active removal of nutrient during the dry season at the mid-salinity zone suggest that nutrient distribution in the Seomjin River estuary was mainly controlled by biological processes and nutrient fluxes into the Gwangyang Bay might be significantly modified of by the primary production.

• Nuclear Engineering and Technology
• /
• 제28권3호
• /
• pp.311-319
• /
• 1996

We reconstruct the assembly pinwise flux using several types of boundary conditions and confirm that the reconstructed fluxes are the same with the reference flux if the boundary condition is exact. We test EPRI-9R benchmark problem with four boundary conditions, such as Dirichlet boundary condition, Neumann boundary condition, homogeneous mixed boundary condition (albedo type), and inhomogeneous mixed boundary condition. We also test reconstruction of the pinwise flux from nodal values, specifically from the AFEN [1, 2] results. From the nodal flux distribution we obtain surface flux and surface current distributions, which can be used to construct various types of boundary conditions. The result show that the Neumann boundary condition cannot be used for iterative schemes because of its ill-conditioning problem and that the other three boundary conditions give similar accuracy. The Dirichlet boundary condition requires the shortest computing time. The inhomogeneous mixed boundary condition requires only slightly longer computing time than the Dirichlet boundary condition, so that it could also be an alternative. In contrast to the fixed-source type problem resulting from the Dirichlet, Neumann, inhomogeneous mixed boundary conditions, the homogeneous mixed boundary condition constitutes an eigenvalue problem and requires longest computing time among the three (Dirichlet, inhomogeneous mixed, homogeneous mixed) boundary condition problems.

• 한국생산제조학회지
• /
• 제7권6호
• /
• pp.42-48
• /
• 1998

This paper is concerned with the heat flux distribution and energy partition for creep-feed grinding. From measurements of transient grinding temperatures in the workpiece sub-surface using an embedded thermocouple, the overall energy partition to the workpiece was estimated from moving heat source theory for a triangular heat flux distribution as 3.0% for down grinding and 4.5% for up grinding. The higher energy partition for up grinding can be attribute to the need to satisfy thermal compatibility at the grinding zone. The influence of cooling outside the grinding zone can be analytically taken into account by specifying convective heat transfer coefficients on the workpiece surface ha ahead of the heat source (grinding zone) and hb behind the heat source. The smaller energy partition together with slightly lower grinding power favors down grinding over up grinding.

• 전기학회논문지
• /
• 제56권3호
• /
• pp.506-513
• /
• 2007

This paper proposes a rotary magnetic position sensor which has a sinusoidally magnetized permanent magnet with a small number of poles. To make the sinusoidal magnetic flux density distribution from the permanent magnet, a magnetizing future is optimized by the DOE(Design of Experiments) method. The magnetization process is analyzed using the Preisach model and 2 dimensional finite element method. The magnetic flux density distribution from the magnetized permanent magnet is very similar to ideal sine wave. The simulation result of the magnetic flux density distribution is compared with the experimental one. Also the availability of the proposed rotary type magnetic position sensor is confirmed by position calculation technique.

• Journal of Magnetics
• /
• 제20권4호
• /
• pp.387-393
• /
• 2015

Torque ripple is necessarily generated in interior permanent magnet synchronous motors (IPMSMs) due to the non-sinusoidal distribution of flux density in the air gap and the magnetic reluctance by stator slots. This paper deals with an asymmetric rotor shape to reduce torque ripple which can make sinusoidal flux density distribution in the air gap. Meanwhile the average torque is relatively increased by the asymmetric rotor. Response surface method (RSM) is applied to find the optimum position of the permanent magnets for the IMPSM with improved torque performance. Consequently, an asymmetric structure is the result of RSM and the structure has disadvantage of a mechanical stiffness. Finally, the performance of suggested shape is verified by finite element analysis and structural analysis is conducted for the mechanical stiffness.

• 한국입자에어로졸학회지
• /
• 제10권4호
• /
• pp.155-162
• /
• 2014

The internal temperature will change depending on operation conditions and material of cyclone dust collector. This study compares the results of collection efficiency and temperature distribution on the different heat flux at wall of dust collector. The previous researcher's experiment results were used to confirm the reliability of CFD(Computational Fluid Dynamics) model. Based on this verified CFD model, we extended the analysis on the cyclone dust collectors. In CFD study, we used RNG k-epsilon model for analysis of turbulence flow, fluid is air, the velocity at inlet is 10 m/s, the temperature of air is $600^{\circ}C$. Because of the difference of outer vortex and inner vortex temperature, the collection efficiency will reduce with the increase of heat flux, showed the highest collection efficiency at heat insulation.

• 대한전기학회논문지
• /
• 제39권1호
• /
• pp.29-35
• /
• 1990

This paper proposes a tow-dimensional magnetic flux distribution analysis of the double-sided linear induction motor(DLIM). Both the longitudinal end-effect and the transverse edge-effect, which are due to the finite length and width of the primary stator, are considered. Also each force which is due to the variation of slip frequency was computed to show the fact that the thrust force of DLIM is dependent on both the longitudinal end-effect and the transverse edge-effect. To ascertain the propriety of this analysis, the simulated results of the magnetic flux density distribution in the airgap are compared to the experimental data.