• Journal of Industrial and Engineering Chemistry
• /
• 제67권
• /
• pp.72-79
• /
• 2018

Hybrid F2HX surfactants bearing a sulfate moiety and both hydrocarbon and fluorocarbon chains were prepared by the reaction of alkyl glycidyl ethers with fluoro-alcohol, and subsequent sulfation. The fluorocarbon number in F2HX was fixed at the shortest number possible (i.e., 2), while the hydrocarbon number (X) in the second chain was varied between 2, 4, 6, and 8. Their surface-active properties and emulsion stabilities were systematically estimated as a function of the X. Among them, F2H8 exhibited the optimal surfactant performance, which was comparable to previously reported surfactants and it was successfully applied in the emulsion polymerization of vinylidene fluoride.

• Journal of Ceramic Processing Research
• /
• 제19권5호
• /
• pp.361-368
• /
• 2018

We investigated the interfacial properties of fluorocarbon self-assembled monolayers (FC-SAMs) with different alkyl chain lengths. It was found that the substrate characteristics were changed rapidly with the fabrication time and temperature of the SAM. FC-3SAM, which has the shortest alkyl chain in this study, showed a contact angle of $54.1^{\circ}$ when it was fabricated in an electric oven at $60^{\circ}C$ for the first minute. The FC-3SAM showed a contact angle of up to $76.9^{\circ}$ when it was fabricated in an electric oven at the same temperature condition for 180 minutes. FC-10SAM, which has the longest alkyl chain in this study, showed a contact angle of $64.7^{\circ}$ when it was fabricated at a temperature condition of $60^{\circ}C$ for 1 minute, and a contact angle of $98.7^{\circ}C$ at a temperature condition of $60^{\circ}C$ for 180 minutes. It was found that the FC-10SAM shows an increased contact angle and hydrophobic properties due to a well-aligned molecular structure resulting from a strong van der Waals force. In contrast, the FC-3SAM shows a small contact angle due to the intermolecular disorder resulting from a weak van der Waals force. The average roughness of FC-SAMs was investigated using AFM. The surface roughness of FC-SAMs, which verifies the results of contact angle, was confirmed. At a fabrication time of 120 minutes, the FC-10SAM showed an improvement in average roughness by 62% compared to that of FC-3SAM due to its good alignment.

• Bulletin of the Korean Chemical Society
• /
• 제16권6호
• /
• pp.493-498
• /
• 1995

Ultrathin networks of itaconic acid copolymers and poly(allylamine) were produced by a Langmuir-Blodgett (LB) technique employing a double-chain amine as a monolayer template which was subsequently removed by extraction after thermal crosslinking. Itaconic acid copolymers used were copoly (itaconic acid-ethyl vinyl ether) and copoly (itaconic acid-n-butyl vinyl ether). The polyion-complexed monolayers of three components consisting of template amine, itaconic acid copolymer and poly (allylamine) were formed at the air-water interface. The Langmuir film properties have been studied by the surface pressure-area isotherm and fluorescence microscopy. The monolayers were transferred on solid substrates and were characterized by FT-IR spectroscopy, X-ray photoelectron spectroscopy, and scanning electron microscopy (SEM). Two-dimensional polymer networks were formed through imide or amide linkages by heat treatment under vacuum. The heat-treated films were extracted with chloroform after immersion in aq. sodium chloride to remove the template amines. SEM observation of a LB film on a porous fluorocarbon membrane filter with pore diameter of 0.1 μm showed covering of the pores by six layers in the polyion complex state.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.915-922
• /
• 2017

내열 및 내유성 고무복합체 특성연구(The study on the thermal and oil resistance rubber composite), 2016.[6] 연구에서는 고온($150^{\circ}C$, $175^{\circ}C$, $200^{\circ}C$) 조건의 고온촉진노화를 통하여 불소고무 복합체의 수명을 예측하였다. 일반적인 고무제품은 온도, 습도, 오존, 빛, 유제, 기계 및 전기적 응력 등의 특성저하 인자에 따라 다른 특성을 나타낼 가능성이 있으며, 이러한 문제를 해결하기 위하여 "내열 및 내유성 고무복합체 특성연구"[6] 연구에서 얻어진 고온촉진노화에 의한 수명 예측값과 저온촉진노화간의 인장강도 변화율 및 신장률 변화율 그리고 부피 변화율, 무게 변화율, 두께 변화율 및 열전도도를 비교 검토하였다. 검토 결과, 요구 한계수명은 모두 만족하였지만 고온촉진노화 결과와 저온촉진노화 결과 간 변화율에서 약간의 격차를 보였다. 이러한 변화율 격차가 일어나는 원인은 고온촉진노화에서는 노화 시 불소고무의 주사슬 분해로 인하여 인장강도, 신장률 감소 및 부피, 무게, 두께 증가가 일어나는데 비해 저온촉진노화에서는 $80^{\circ}C$에서 불소고무의 지속적 경화반응으로 인하여 인장강도, 신장률 및 부피, 무게, 두께 변화가 적게 나타났을 것으로 판단된다.

• Korean Chemical Engineering Research
• /
• 제59권4호
• /
• pp.632-638
• /
• 2021

반도체 공정에서 구리 배선 공정의 도입에 따라 플라즈마 식각에 의해 배선의 형성과정에서 구리 산화물, 불화물 및 불화탄소 등을 포함한 복합 잔류물을 형성하게 된다. 본 연구에서는 아민기(-NH₂)와 카르복실기(-COOH)를 갖는 성분으로 세정액을 제조하여 구리 배선 공정에서의 식각 잔류물 제거 특성을 분석하였다. 아민기를 포함한 세정액은 질소에 치환된 성분 및 탄소결합의 길이에 따라 세정효과에 차이를 보이며, 세정액의 pH가 증가함에 따라 구리 산화물의 식각 속도가 증가하는 경향성을 보였다. 아민기의 활성은 염기성 영역에서, 카르복실기의 활성은 산성 영역에서 이루어지며, 각각의 영역에서 구리 또는 구리 산화물과의 complex 형성을 통하여 세정공정이 진행되었다.