• The korean journal of orthodontics
• /
• v.2 no.1
• /
• pp.23-28
• /
• 1971

In this study, sections of twenty eight teeth were used to investigate the effect of topical application of $8\%$ stannous fluoride on the decalcification rate of enamel surfaces stripped in a manner suggested for orthodontic purpose. The enamel treated with a single application of a fluoride had a significantly lower tile rate of decalcification for the first 96 hours to lactate buffer solution. After double application of fluoride, decalcification rate decreased signicantly. This study suggested that the continuing protection of stripped surfaces should be sought by regularly scheduled treatment of the enamel with the topical application of fluoride and regular use of a fluoride containing dentifrice.

• Restorative Dentistry and Endodontics
• /
• v.22 no.2
• /
• pp.575-595
• /
• 1997

Replacement resorption is followed by the delayed replantation of an avulsed tooth. Currently no effective treatment is substantiated for replacement resorption. The purpose of this study was to investigate the effect of stannous fluoride, bisphosphonate (etidronate disodium) and gallium nitrate, which have been shown to reduce dentin resorption, on human dentin. Osteoclasts were collected from tibeas of chick embryo. The cells were well agitated to prevent adhesion and seeded onto the sliced human dentin wafers which had been soaked in either culture media (control), or several different concentrations of stannous fluoride, etidronate disodium (l-hydroxyethylidene -1,1-bisphosphonate disodium), and gallium nitrate. Resorption was measured by counting the number of resorptive pit produced by the cells. Results are as follows. Stannous fluoride and etidronate disodium showed statistically significant reduction of dentin resorption(p<0.05) but the effect of stannous fluoride seemed to be its high cytotoxicity. Etidronate disodium did not show cytotoxicities in all experimented concentrations. Gallium nitrate did not show differences in resorption either between different concentrations or from the control group.

• The korean journal of orthodontics
• /
• v.47 no.5
• /
• pp.306-312
• /
• 2017

Objective: The purpose of this study was to examine the effect of commercially available fluoride-containing oral rinses on the corrosion behavior of titanium alloys, which are the main components of orthodontic miniscrews. Methods: Four commercially available oral rinses (solution A, pH 4.46/260 ppm fluoride; solution B, pH 4.41/178 ppm fluoride; solution C, pH 6.30/117 ppm fluoride; and solution D, pH 4.17/3.92 ppm fluoride) were tested on titanium alloy (Ti-6Al-4V) circular plates, and saline was used as the control. The open-circuit potential and potentiodynamic polarization of these materials were measured. Thereafter, all samples were evaluated under a field-emission scanning electron microscope. Results: Among the tested oral rinses, except solution D, the more the fluoride content was, the greater was the corrosion potential downtrend; the corrosion resistance of the titanium alloy sample was also lowered significantly (p < 0.05). Field-emission scanning electron microscopic analysis of the surface morphology of the titanium alloy samples revealed that all samples had some defects, crevices, or pitting after exposure to the oral rinses than before treatment. In particular, the samples in solution A showed the most changes. Conclusions: Commercially available oral rinses having a high fluoride concentration and a low pH may reduce the corrosion resistance of titanium alloys used in dental appliances such as orthodontic titanium miniscrews and brackets.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.711-714
• /
• 2001

A new technology to make fluoride gas such as NF$_3$contained in the exhaust gas from semiconductor manufacturing plants convert directly into a harmless substance have been established and new concept on the disposal treatment of global warming gases were presented. Experimental results verify that the chemical reactions can be take place at substantially lower temperature of 80-40$0^{\circ}C$ as compared with the combustion treatment method. Reaction product is mainly metal fluoride which is a harmless and a valuable chemical material as one of new resources. The other favorable characteristics are that the continuous treatment is possible at a low temperature under atmospheric pressure. Furthermore this process is compact, easily controllable and safely operable at low running cost. This paper concerns with a new harmless disposal treatment of toxic global warming gas.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.2
• /
• pp.73-78
• /
• 2008

Inorganic chemical treated wood was prepared by impregnation of calcium or magnesium chloride ($CaCl_2$ or $MgCl_2$) solution and immersion in saturated solution of ammonium fluoride ($NH_4F$) as a reactant in order to make an introduction of a refractory fluorides with fungicidal and insecticidal effects in wood. The weight percent gains (WPGs) were increased with increase in concentration of calcium chloride or magnesium chloride solution, and were higher in treatment with calcium chloride than with magnesium chloride. Inorganic substances were produced mainly in the lumina of tracheides. These substances were proved to be the calcium fluoride or magnesium fluoride by the energy dispersive X-ray analyzer in conjunction with a scanning electron microscope (SEM-EDX). The treated wood showed good decay resistance because the weight losses were hardly occurred by the test fungi such as Tyromyces palustris and Trametes versicolor. The fire resistance effect was superior to the treated wood compared with that of the untreated wood.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.47 no.2
• /
• pp.196-204
• /
• 2020

The aim of the study is to compare the fluoride release and recharge properties of glass ionomer cements and 'alkasite'. Specimens of two glass ionomer cements (Fuji IX GP and Riva Self Cure), 'alkasite' restorative material (Cention N) and composite resin (Filtek™ Z350XT) were prepared. The fluoride release of each specimen was measured for 28 days. Thereafter, 1.23% acidulated phosphate fluoride (APF) gel was applied to experimental groups. No treatment was performed on control groups. The fluoride release was measured for additional 7 days to evaluate the fluoride recharge properties of each materials. The fluoride release was highest in Riva Self Cure, followed by Fuji IX GP, Cention N (p < 0.05). Fluoride release of Cention N was measured to be approximately 49% of Fuji IX GP's. After the application of 1.23% APF gel, increases in fluoride release were observed in Riva Self Cure, Fuji IX GP and Cention N (p < 0.05). Fluoride recharge was observed in Cention N as well as in glass ionomer cements. Further studies are required to evaluate the anti-cariogenic properties of Cention N at clinical conditions.

• Journal of Digital Convergence
• /
• v.15 no.10
• /
• pp.485-492
• /
• 2017

The purpose of this study is to investigate the convergence effects of the experience of adult preventive care on the treatment satisfaction and the dental fear, and the survey was conducted from January to April 2017 for 292 adults of aged 20 years or older living in the metropolitan area. The collected data were subjected to $x^2-test$, t-test and multiple regression analysis using SPSS 22.0 program. Fluoride application was the most prevalent experience of adult preventive treatment, and the satisfaction level of the treatment was high in case of fluoride application was experienced. On the other hand, dental fear was lower if preventive scaling was experienced. As a result of multiple regression analysis, variables affecting patient satisfaction were experience of fluoride application, and the variables affecting dental fear level were oral health condition and preventive scaling experience. The result of this study was confirmed that the satisfaction level of treatment was increased and the dental fear was lowered. Therefore, improvement of oral health promotion can be expected by recognizing of the importance of preventive treatment and providing of the dental preventive service through oral health education.

• Restorative Dentistry and Endodontics
• /
• v.26 no.4
• /
• pp.341-349
• /
• 2001

Dental caries is the most common oral disease. There are many factors contributing to its development, but complete understanding and prevention are not fully known. However, it is possible to remineralize the early enamel curious lesion by fluoride containing remineralization solution. Recently the pH-cycling model has been used to examine the effect of fluoride solution on remineralization of artificial caries in vitro as it can closely simulate the conditions encountered in vivo within a carefully controlled environment. The aim of this study was to evaluate the remineralizing effects of supersaturated buffer solutions under pH-cycling model. The specimen with 3mm-diameter was made using mature bovine incisors which has no caries and has sound enamel surface. Early curious lesions were produced by suspending each specimens into demineralization solution at pH 5.0 for 33 hours and the specimen whose surface hardness value ranged from 25 to 45 VHN were used. The pH cycling treatment regimen consisted of 5 min soaks of three treatment solutions four times per days for 15 days and the continuous cycling of demineralization and remineralization were carried out for 15 days. Following the pH-cycling treatment regimen, the specimens' surface microhardness were measured by the Vickers hardness test (VHN) and analyzed by ANOVA and Duncan's multiple-range test. 1. The surface microhardness value of supersaturated solution, Senstime, and Gagline groups were increased after pH cycling, and that of supersaturated solution was significantly Increased compared to saline group(P<0.05). 2. The surface remineralization effect of fluoride containing solutions was accelerated by saliva under pH-cycling mode 3. The pH cycling model was considered appropriate to mimic the intra-oral pH changes when evaluating demineralization and remineralization in vitro. Under the results of above study, salivary remineralization effect can be improved by fluoride containing remineralization solution. The pH-cycling model was considered appropriate to mimic the intra-oral pH changes when evaluating demineralization and remineralization in vitro.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.4
• /
• pp.579-586
• /
• 2004

The objective of the present prospective trial was to compare the efficacy of chlorhexidine(Cervitec), Fluoride (Fluorprotector) and combination of chlorhexdine and fluoride varnishes in decreasing the level of salivary mutans streptococci. Forty healthy students of school of dentistry, Chonbuk national university were investigated to evaluate mutans streptococci(MS) counts and randomized into four groups to treat with the experimental varnishes; A) untreated group(n=10), B) chlorhexidine group(n=10), C) fluoride group(n=10), D) chlorhexidine and fluoride group(n=10). Dentocult $SM^{(R)}$ (Orion Diagnostica) strip method was used for measurement of the level of mutans streptococci in saliva. Stimulated saliva were collected at baseline for mutans streptococci counts evaluation (ms1), 12 weeks later the completion of each varnish treatment, mutans streptococci counts were re-evaluated. In varnish group with chlorhexidine, fluoride and combination of chlorhexidine and fluoride, the level of mutans streptococci was lower after 12 weeks than at baseline, but there were no significant differences in saliva(p>0.05), when compared with baseline. After 12 weeks, a remarkable reduction was still found in the subjects with high level of mutans streptococci at baseline, but not different in the low and moderate level of mutans streptococci(p>0.05).

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.10
• /
• pp.986-993
• /
• 2010

In this study, sorption characteristics of thermally treated activated alumina (AA) for fluoride were investigated. Sorption experiments have been conducted in equilibrium and kinetic batch conditions. Also, effects of solution pH and anions on fluoride removal have been observed. The properties of thermally treated ( $700^{\circ}C$) activated alumina (AA700) and untreated activated alumina (UAA) were compared using field-emission scanning electron microscope, energy-dispersive spectrometry, X-ray diffractometer (XRD) analysis, and Brunauer-Emmett-Teller (BET) analysis. From the experiments using AA thermally treated at different temperatures (100, 300, 500, $700^{\circ}C$), it was found that at high fluoride concentrations (50, 100, 200 mg/L) the sorption capacity of thermally treated AA increased with increasing thermal treatment temperature. At an initial fluoride concentration of 200 mg/L, the sorption capacity of AA700 was 3.67 times greater than that of UAA. The BET analysis showed that the specific surface area of UAA was about 2 times larger than that of AA700. The XRD analysis indicated that UAA was composed of both boehmite (AlOOH) and bayerite ($Al(OH)_3$) while AA700 was $Al_2O_3$. The reason that fluoride sorption capacity of AA700 increased despite of decrease in specific surface area compared to UAA could be attributed to the change of crystal structure. The kinetic sorption test showed that fluoride sorption to AA700 arrived at equilibrium after 24 h. The equilibrium test demonstrated that the maximum sorption capacity of AA700 was 5.70 mg/g. Additional batch experiments indicated that fluoride sorption to AA700 was the highest at pH 7, decreasing at both acidic and basic solution pHs. Also, fluoride sorption to AA700 decreased in the presence of anions such as phosphate, nitrate, and carbonate. This study demonstrated that thermal treatment of AA at high temperature could increase its sorption capacity for fluoride.