• 펄프종이기술
• /
• 제43권4호
• /
• pp.76-81
• /
• 2011

This study was carried out in order to develop a speciality functional coated paper, which can be recognized under a ultraviolet lamp. The special fluorescent whitening agent (FWA) which absorbs ultraviolet light (397~410 nm) and emits it as yellowish light (570~500nm) was used. The special FWA was applied in a coating color in two ways: (1) direct application to a coating color as a FWA; (2) application on pigment surface, drying it and application it as a fluorescence whitening pigments (colored pigments). The effects of the special FWA on coating color properties were tested and the distribution of colored pigments in coated paper was evaluated under a ultraviolet lamp. The results showed that the colored pigments didn't affect on coating color properties. Experimental results showed the possibility of producing a security coated paper using the special FWA. To produce a speciality functional paper, it was found to be proper to apply the special FWA in the form of colored pigment.

• 펄프종이기술
• /
• 제48권2호
• /
• pp.5-12
• /
• 2016

White waste papers are very important resources in the paper industry, but their use is limited because of the residual of fluorescent whitening agent (FWA). So the removal of FWAs from waste paper is an important task in the recycling process to improve the use of recycled resources. In this study, we focused on the FWAs used for surface treatments and carried out physical and chemical treatments to remove them from white waste papers. The white waste papers were disintegrated with a surfactant in different pH and temperature conditions, and then handsheets were made for the measurement of the fluorescence index, which is proportional to the amount of FWAs on papers. The effect of the flotation process on the removal of FWAs after disintegration was also investigated. The fluorescence index decreased as the disintegration time increased, but over a relatively long time, the fluorescence index increased again, which indicated the readsorption of the FWAs detached from the cellulosic fibers of the white waste papers. The lowest fluorescence index was shown when the waste papers were disintegrated with a 0.3% surfactant addition at pH 10 and at $45^{\circ}C$. However, the flotation treatment was not effective, because the flotation induced contact between the detached FWAs and the cellulosic fibers, and re-adsorption occurred.

• 펄프종이기술
• /
• 제47권6호
• /
• pp.106-112
• /
• 2015

Many researchers have proposed analytical methods to measure the adsorption of di-sulpho fluorescent whitening agents (D-FWAs), but practical methods for D-FWA utilization in an actual paper mill have not been established. In particular, the D-FWA adsorption behavior must be monitored in paper mills to ensure the effective use of D-FWAs. This study used the zeta-potential of pulps as an indicator of the adsorption behavior of a D-FWA. We identified the relationship between the actual adsorption of the D-FWA and the zeta-potential of the pulps as a function of D-FWA addition. zeta-potential measurements were then used to analyze the D-FWA adsorption behavior under different conditions of pulp type, conductivity, and pH. The actual adsorption of a D-FWA was proportional to the ${\Delta}zeta-potential$ of the pulps (i.e., the difference between the zeta-potential of a pulp containing no D-FWA and one containing the D-FWA). The ${\Delta}zeta-potential$ of the pulps was therefore adopted for adsorption analysis. A higher adsorption of the D-FWA was observed onto Hw-BKP than onto Sw-BKP because of the shorter fiber length and higher fines content of Hw-BKP. A high conductivity and an acidic pH decreased the D-FWA adsorption because of direct effects of high ion concentrations and low pH on the D-FWA solubility. Therefore, a D-FWA must be added to Hw-BKP under low conductivity conditions and at neutral or alkaline pH to optimize the D-FWA adsorption.

• 펄프종이기술
• /
• 제43권2호
• /
• pp.9-15
• /
• 2011

Fluorescent whitening agent (FWA) is a widely used chemical in paper industry, but a systematic and scientific method on FWA analysis has not been established. We performed the basic researches on the fluorescence analysis of FWA. The fluorescence of FWA was investigated using a spectrofluorometer and a spectrophotometer. When FWA solution was analyzed using the spectrofluorometer, we found that the peak wavelength of the fluorescence emission was about 440 nm and that of the fluorescence excitation was about 370 nm irrespective of FWA types. Papers dyed with an internal FWA were prepared in a laboratory and the reflectance and the fluorescence index were measured using the spectrophotometer. It was confirmed that the optimum peak wavelength of the reflectance was 440 nm and the fluorescence index calculated from the CIE whiteness with and without UV light under a light source D65 was the best indicator to measure the fluorescence of FWAs exiting in papers.

• 한국염색가공학회지
• /
• 제12권3호
• /
• pp.192-198
• /
• 2000

Influence of the fluorescent whitening agent(FWA)'s adsorption on the whiteness of cotton and on the color change of the dyed fabrics was investigated by repeating wash cycles. Cotton 100% and cotton60/polyester40 blended fabrics were dyed pink, blue and yellow, and cyanuric chloride diamino stilbene(CC/DAS) and distyryl bisphenyl(DSBP) were used for the FWA with laundry detergents. Fabrics were washed at $20^\circ{C}$ with Terg-o-tometer. The FWA adsorption amount was measured by the absorption intensity for the pyridine-water extracted solution. The FWA adsorption increased on the cotton fabric with the wash cycles. Though adsorption of CC/DAS continuously increased up to the 20th cycle, that of DSBP increased sharply before the 10th cycle and reached an equilibrium. The whiteness of the fabrics dried in the shade was greater than that dried under the sunlight through window glass. The color change of dyed fabrics was increased by the number of wash cycles. Pink changed more greatly than blue, yellow or grey cloth. The color change(\Delta{E)}$ of dyed fabric washed repeatedly up to the 20th cycle with the detergent without FWA was less than 1. It is recommended to wash pale colored fabric with the detergent free of FWA.

• 펄프종이기술
• /
• 제47권3호
• /
• pp.34-39
• /
• 2015

Fluorescent whitening agents (FWAs) are widely applied in the papermaking process to improve the CIE whiteness and the ISO brightness of papers. Large amounts of FWAs are used in the paper and paperboard industry, but no standard method exists for quantitative FWA analysis. Therefore, a new method is needed to analyze the presence of FWAs in paper and paperboard to control their additions and applications. In particular, FWA analysis must concentrate on those used for surface treatment of paper because their use in surface applications has increased recently. The purposes of this study were to measure the optical properties of papers surface-treated with oxidized starch containing FWAs and to deduce the regression equations for the quantitative analysis of FWAs used for surface treatments. Surface sizing was carried out to treat the surface of a base paper with T-FWA and H-FWA, and the pickup weight of the surface sized paper was measured to determine the real weight of FWAs transferred onto the paper surface. After surface sizing and preconditioning, the paper was evaluated for CIE whiteness, ISO brightness, fluorescence index, and reflectance at 440 nm using an Elrepho spectrophotometer. The CIE whiteness and the ISO brightness increased linearly as FWA content increased. The fluorescence index and the reflectance showed linear relationships with T-FWA and H-FWA. Linear regression equations were determined for the quantitative analysis of FWAs used for surface treatments.

• 대한가정학회지
• /
• 제35권2호
• /
• pp.137-145
• /
• 1997

The effect of accumulated residual soils in wear and wash tests on yellowing of white dress shirt was studied. The test samples after repeated home laundry at 20 households for six months were measured residual soils, $\Delta$b*.As well as, correlation between residual soils and yellowing was also examined. As a result, residual soils increased with number of wear and wash cycles, a little decreased in using with enzyme detergent. The b* value of test samples with fluorescent whitening agent were distributed -12.850~0.291. Correlation coefficient between sebum soils, protein soils and $\Delta$b* was 0.98, 0.58. Ultimately, residual sebum soils have more higher correlation than residual protein soils. Hence, residual sebum soils have more effect on yellowing than residual protein soils. therefore, effective a device as improvement of laundry condition and textile development needs for decrease of sebum soils.

• 펄프종이기술
• /
• 제48권2호
• /
• pp.46-55
• /
• 2016

The microcrystalline cellulose (MCC) was prepared from oil palm biomass, empty fruit bunch (EFB) for increasing the usability of EFB. The morphological, physical and chemical properties of MCC made from EFB were evaluated by comparing with those of the commercial MCC obtained from AVICEL. The EFB-MCC had the wider distribution in particle size and there were many small particles around $10{\mu}m$. There were no significant differences in the cellulose crytallinity and the chemical composition between EFB-MCC and AVICEL-MCC. The properties of tablet samples made by the common direct compression process were evaluated depending on the types of MCC and the compression pressure during tablet making process. The tablet made of EFB MCC showed the higher compressed structure, which resulted in the less disintegration by the water soaking treatment than those made of Avicel-MCC. The results of this study showed that the EFB-MCC could be utilized as one of the commercial MCC.

• 펄프종이기술
• /
• 제48권2호
• /
• pp.56-60
• /
• 2016

Neutral or alkaline papermaking provides many advantages in paper strength and processing conditions. It also provides the opportunity of using calcium carbonate fillers in papermaking. These diverse advantages have made almost all paper machines of printing and writing papers run under neutral and alkaline conditions. On the other hand, linerboard machines, which use recycled papers as a raw material, are running under acid conditions using a rosin sizing system. Because the recycled raw materials used by the linerboard industry contain significant amounts of alkaline papers, the linerboard industry has an interest in the possibility of using the neutral or alkaline papermaking opportunity. In this study, the compatibility of the recycled linerboards under neutral or alkaline papermaking conditions was examined by recycling them under various pH conditions. The sizing degree of the papers recycled under neutral or alkaline was significantly lower than that of acid formed papers indicating that during the neutral or alkaline recycling process the rosin sized papers lost their sizing efficiency. Recycling of acid formed linerboards under neutral or alkaline conditions increased the amount of foam, and the foam contained substantial amount of solid materials derived from the acid sizing systems. Use of cationic polyelectrolytes including PEI and poly-DADMAC improved the sizing degree of the recycled papers under neutral and alkaline conditions. PEI decreased the foam generation as well while poly-DADMAC did not show any reducing effect of the foam. These results suggest that PEI forms coordinate bonds with rosin acid and precipitate them onto the surface of recycled fibers, while the reaction products between poly-DADMAC and rosin acid ions still remain water soluble under neutral or alkaline conditions.

• 한국포장학회지
• /
• 제18권1_2호
• /
• pp.27-32
• /
• 2012

본 연구에서는 식품포장재로 이용되는 재활용 및 비재활용 종이류가 안전한지를 평가하기 위해 식품공전 규격에 준하여 실험하였다. 식품포장재 중에서도 피자상자를 선택하였는데, 이는 피자가 고온에서 조리되어 포장되며 다량의 기름 성분을 함유하여 오염물질이 이행될 가능성이 상대적으로 높을 것으로 예상됐기 때문이다. 식품공전에서는 PCBs, 납, 카드뮴, 수은, 6가크롬, 비소, 포름알데히드 및 형광증백제의 허용 잔존농도를 정하여 식품포장재로 이용되는 종이류에 잔존하는 유해물질을 규제하고 있다. PCBs의 여섯개의 표준품과 모든 시료의 피크가 일치하지 않았으므로 피자상자에는 PCBs가 잔존하지 않는 것으로 판단된다. 카드뮴, 수은, 6가크롬에 대한 재질규격 평가를 위한 분석이 추가적으로 필요하다고 사료된다. 비소와 납은 모든 시료에서 기준치의 10배 이하의 양이 검출되어 식품포장재로 사용되었을 때 안전성에 큰 영향을 미치지 않을 것으로 판단된다. 포름알데히드는 모든 시료에서 기준치보다 낮은 농도로 검출되었지만 잉크를 많이 함유하고 있는 표면에서 미량이지만 상대적으로 높게 검출되었다. 형광증백제는 비재활용 종이 소재의 상자에서는 검출되지 않았다. 그러나, 상자 내 피자 포장 유무나 잉크의 함량 정도에 상관없이 재생용지로 만들어진 상자 시료에서는 형광증백제가 검출되었다. 형광증백제는 불검출이 기준이므로 포함된 재활용지를 식품 포장으로 이용할 때는 식품과의 직접 접촉을 피하기 위해 중간에 안전성이 입증된 간지 등을 삽입하는 방법을 사용하여 최종 식품의 안전성에 영향을 주지 않는 것이 바람직할 것이다.