• 기술사
• /
• 제42권5호
• /
• pp.41-45
• /
• 2009

The last century of lighting has been dominated by incandescent, fluorescent and high-intensity discharge(HID)light sources. In the late 1970's, after green LEDs were invented, Dr. Ching Tang at Eastman Kodak discovered that sending an electrical impulse through carbon compound caused such material glow. Present day LED commercial packages have reached 100 lm/W, comparable to the efficacies of fluorescent and certain HID lamps. LED products available today are market as "Green-Industry" but actually low light output compared to typical light sources. The combination of high price and low light output make them a poor replacement for current technology. It is very important to compare new LED products to the most efficient conventional technology that could be used for any specific application. As LED technology advances, costs decrease, and efficiency improves, LEDs will build market share in the general illumination market.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1998년도 제28회 추계학술대회
• /
• pp.166-174
• /
• 1998

The distribution of oil film thickness in piston were measured by induced fluorescence method. A Xe lamp was used as light source. Coumarine-6 was mixed with oil as the fluorescent dye. Fluorescent signal which is proportional to the oil film thickness was acquired by CCD camera and transmitted to the personal computer as video signal. In order to solve the problem of measurement system, irregular distribution and unstability of light intensity, as well as to know the relationship between the oil film thickness and output signal, three different calibration techniques were used. Motoring and firing tests were performed in a single cylinder research engine with transparent liner. By analyzing the oil film thickness converted from the photographed image, it was observed that each of three piston rings scrapes the oil both upward and downward and oil film thickness is not uniform horizontally at a given piston land. The amount of oil in each land was considerably affected by the engine load. It is thought that the blow-by gas blows the oil down to the crankcase.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.457-460
• /
• 2009

The thermo-optical characteristics of new generation fully reversible diacetylene vesicles, DCDDA-mono-mBzA and DCDDA-bis-mCPE, and their solid film composites are utilized as thermochromic display materials. Conspicuous color intensity of their solid films and blue-to-red color shift with non-fluorescent to fluorescent switching at $100^{\circ}C$ make them promising materials for dual color thermally actuated display devices of the near future.

• KSBB Journal
• /
• 제28권1호
• /
• pp.31-35
• /
• 2013

In this work a $MABOOMS^{TM}$ has been employed to cultivate microorganisms and investigated the effects of culture medium components on cell growth. A 24-well microplate coated with 4-divided fluorescent sensing membranes was used to monitor the dissolved oxygen, pH and cell concentration during cultivations. Fluorescence intensity for dissolved oxygen or solution pH and reflectance for cell concentration was online monitored by using the $MABOOMS^{TM}$. The online monitoring results showed the effects of culture medium components on cell growth in cultivation processes very well.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2700-2703
• /
• 2008

An experiment on bubble-driven flow was performed in order to understand fundamental knowledge of flow structure around a rising bubble in a stagnant fluid. The measurement technique consists of a combination of the three most often used PIV techniques in multiphase flows: PIV with fluorescent tracer particles, the digital phase separation with a masking technique and a shadowgraphy. The key point of the measurement is that the background intensity of a PIV recording can be shifted to a higher level than a bubble region using a shadowgraphy in order to distinguish from fluorescent particles and a bubble as well. Flow fields were measured without an inaccurate analysis around a fluid-bubble interface by using only one camera simply.

• 한국자동차공학회논문집
• /
• 제12권1호
• /
• pp.25-31
• /
• 2004

Two-dimensional laser visualization methods have been used in the study of breakup and atomization processes of non-evaporating diesel sprays. A single-hole spray injected into a quiescent atmospheric environment was visualized by the LIF(Laser Induced Fluorescence) and scattering technique. The LIF technique could be implemented to take the images which are magnified enough to show the shape of liquid ligaments and small droplets. The spontaneous scattering and fluorescent images of sprays were also taken to investigate the atomization of droplets. In the tip and periphery of a spray. the scattering light is bright and the ratio of fluorescent/scattering intensity is lower. This characteristics indicate the very high number density of small droplets which are well atomized.

• Bulletin of the Korean Chemical Society
• /
• 제5권4호
• /
• pp.154-158
• /
• 1984

In order to characterize the permeability of small unilamellar vesicles (SUV), efflux of 6-carboxyfluorescein (6-CF) from the vesicles was monitored spectrophotofluorometrically. Since the entrapped highly quenched 6-CF (200 mM) became fluorescent upon release from the vesicles, the 6-CF could be used as an efflux probe. SUV containing entrapped 6-CF was prepared from egg phosphatidylcholine and separated by gel filtration on Sepharose 4B. Observed change of relative fluorescent intensity with time was sigmoidal. From this curve, the parameter of permeability was determined either by half-time or a released amount per unit time from the initial slope. Half-time of efflux of prepared SUV having 302 ng phospholipid/ml in 10 mM Tris-HCl buffer pH 7.4 was 21.0 min at $37{\circ}C$. Various factors which could affect the half-time were examined including temperature, pH, salt, and vesicle concentration. In particular the effect of vesicle concentration on the efflux revealed that the permeability can be a function of the concentration.

• 한국환경농학회지
• /
• 제32권2호
• /
• pp.123-127
• /
• 2013

적색광을 이용한 국화의 일장연장 처리기술을 개발하기 위하여 국화의 개화억제를 위한 적색광 강도를 구명하고 생육에 대한 영향을 검토하였다. 국화는 적색광에 의한 파야처리로 개화가 억제되었고 연속된 초적색광 처리로 개화하여 개화의 광가역적 반응을 나타냈다. 인공광 생육실 환경하에서 적색광 $1.4{\mu}mol/m^2/s$ (PAR) 로 일장연장 처리시 국화의 개화가 완전히 억제되었다. 적색광 $1.4{\mu}mol/m^2/s$ 처리는 관행의 전구식형광등 50 Lux 처리와 같이 국화의 개화를 억제시켰다. 적색 LED를 이용한 일장연장 처리로 관행의 전구식형광등 처리보다 국화의 초장은 17 %, 엽면적은 48 % 유의하게 증가하였고 엽수와 생체중은 각각 11 %, 36 % 증가하는 경향이었다.

• 약학회지
• /
• 제41권6호
• /
• pp.749-755
• /
• 1997

It has been reported that dose-dependent $Ca^{2+}$ increase by menadione in platelets could be measured by fluorescent dye, quin-2. The problems will be described here rel ating to measuring $Ca^{2+}$ in menadione-exposed platelets using fura-2 and fluo-3, widely used fluorescent indicators. Additions of menadione to fura-2 loaded platelets and their lysates resulted in marked reduction in fluorescence intensity at both 340nm ($Ca^{2+}$-unbound form) 380nm ($Ca^{2+}$-undbound form) excitation wavelengths. Fura-2 excitation spectra were overlapped with UV-visible absorption spectra of menadione, suggesting that light absorption by menadione itself could quench fluorescence generated by fura-2. Next approach was to use fluo-3 which has the higher wavelength (490nm) of excitation. Previous work demonstrated that treatment with probenecid to platelets was required to prevent fluo-3 dye leakage. However, probenecid itself was proven to be inadequate to measure the concentration of intracellular $Ca^{2+}$; by reducing menadione-induced cytotoxicity in platelets. Our results suggest that it is not feasible to measure $Ca^{2+}$ in platelets by using fura-2 and fluo-3 in the presence of probenecid, and cautions should be taken to measure changes of intracellular $Ca^{2+}$ levels by fluorescent dyes following chemical exposure.

• 한국균학회지
• /
• 제24권3호통권78호
• /
• pp.167-175
• /
• 1996

Ganoderma lucidum 균주는 인공 배지 상에서 광에 의하여 자실체 원기가 형성되었으며, 광질이 자실체 원기 형성에 미치는 영향을 조사한 결과, 자실체 원기 형성능을 가지고 있는 5균주중 3균주는 공시한 모든 형광등의 아래에서 즉, BLB, 순청색, 순녹색, 순황색, 순적색 형광등의 아래에서 자실체 원기가 형성되었고, 2균주는 BLB 형광등을 제외한 가시광선 영역에서 형성되었다. 그러나 암상태에서는 공시한 모든 균주가 자실체를 형성하지 않았다. 자실체 원기는 광도 0.05에서 $10.0\;{\mu}mol\;m^{-2}s^{-1}$의 범위에서 형성되었고, 광도가 $0.5\;{\mu}mol\;m^{-2}s^{-1}$ 이상에서는 자실체 원기의 수가 감소하였다. 주기적인 광조사가 자실체 원기의 형성에 미치는 영향을 조사한 결과, Gl-009균주는 자실체 원기의 수와 무게가 연속광을 조사한 경우보다 증가하였다. 자실체원기를 형성하기 위해서는 최소 4일간의 광조사가 필요하였다. 단색광의 조사가 자실체 원기의 형성에 미치는 영향을 조사한 결과 Gl-003 균주는 400에서 800 nm의 모든 단색광 처리구에서 자실체 원기가 형성되었고, 그 외의 4균주는 400에서 500 nm, 그리고 700에서 750 nm 범위에서 형성되었다.