• Bulletin of the Korean Chemical Society
• /
• 제32권2호
• /
• pp.583-589
• /
• 2011

Fluorescence correlation spectroscopy (FCS) is a sophisticated and an accurate analytical technique used to study the diffusion of molecules in a solution at the single-molecule level. FCS is strongly affected by many factors such as the stability of the excitation power, photochemical processes, mismatch between the refractive indices, and variations in the cover glass thickness. We have studied FCS near the surface of a cover glass by using rhodamine 123 as a fluorescent probe and have observed that the surface has a strong influence on the measurements. The temporal autocorrelation of FCS decays with two characteristic times when the confocal detection volume is positioned near the surface of the cover glass. As the position of the detection volume is moved away from the surface, the FCS autocorrelation becomes one-component decaying; the characteristic time of the decay is the same as the faster-decaying component in the FCS autocorrelation near the surface. This observation suggests that the faster component can be attributed to the free diffusion of the probe molecules in the solution, while the slow component has its origin from the interaction between the probe molecules and the surface. We have characterized the surface contribution to the FCS measurements near the surface by changing the position of the detection volume relative to the surface. The influence of the surface on the diffusion of the probe molecules was monitored by changing the chemical properties of the surface. The surface contribution to the temporal autocorrelation of the FCS strongly depends on the chemical nature of the surface. The hydrophobicity of the surface is a major factor determining the surface influence on the free diffusion of the probe molecules near the surface.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제7권4호
• /
• pp.48-58
• /
• 2002

본 연구는 자외선-형광분석법을 이용한 유류저장시설의 모니터링 시스템의 현장 적용성에 관한 기초 실험으로서, 선행연구에서 사용하였던 샘플들의 실제 오염상황을 충분히 반영하지 못하는 한계점을 보완하였다. 선행연구에서 보다 측정의 신뢰도를 높이기 위하여 오염이 발생하여 이동하고 감지되어지는 실제 상황을 고려한 형광 측정 실험을 수행하였다. 또한 자연환경의 영향을 보기 위하여 수분 함량에 따른 형광의 세기를 비교한 결과 수분에는 큰 영향을 받지 않고, 측정시의 토양의 상태에 좌우된다고 사료된다. 마지막으로 안정적인 오염도 측정값을 얻기 위하여 시스템에 이용할 대표성을 갖는 표준 토양을 결정하기 위한 실험을 수행하였다. 이를 위해 모래와 칼슘-벤토나이트(Ca-bentonite), 연마용 모래를 실험했으며, 이외에도 여러 가지 단일물질들을 테스트하였으나 모래를 제외한 다른 물질들은 시스템에 적용하기엔 한계점이 있었다 그러나 모래는 자체 형광이 낮아 형광 측정에 영향을 적게 미치며, 누구나 쉽게 구할 수 있는 장점과 더불어 오염도에 따른 형광이 비교적 안정적이어서 시스템의 감지부에 넣어줄 표준 토양으로 이용하기에 적합하다고 사료된다.

• 한국세라믹학회지
• /
• 제37권8호
• /
• pp.781-786
• /
• 2000

An Er-doped sulfide fiber was drawn, and its spectroscopic properties were analyzed. Compositions of a 1000 ppmwt Er3+-doped core and an undoped clad were Ge30-Ga1-Asg-S61 and Ge30-As8-S62, in at.%, respectively. Refractive index of the core composition was approximately 0.01 high than that of the clad. In order to enhance the mechanical stability as well as to prevent infiltration of impurity ions such as OH-, an UV-curable polymer was used for the coating. The optical loss of a fiber formed directly from a polymer coated core rod without cladding was ∼15 dB/m at 1.06$\mu\textrm{m}$. In the case of a fiber with core/clad structure, the optical loss was so high that the stimulated emission of erbium fluorescence was not evident. It is believed that presence of inhomogeneous core/clad interface and crystalline aggregates precipitated in the clad region were responsible for the high optical loss. On the other hand, fluorescence characteristics of Er3+ embedded in the core region were more or loss deteriorate compared to fiber preform, which is attributed to the redistribution of the Er ions along with the partial crystallization of the core glass during the fiberization process.

• 한국응용과학기술학회지
• /
• 제39권5호
• /
• pp.720-726
• /
• 2022

형광 강도 변화를 이용하여 세포막의 위상에 따른 하이드록시부티르산 혼입이 생체막에 미치는 영향을 조사하였다. 구형 인지질 이중층인 소포(vesicle)가 이중 에멀젼 기술을 통해 각 층 단위로 제조되었다. 소포 내부의 수성에는 아미노나프탈렌트리술폰산디소듐(ANTS)이 캡슐화되었으며, 소광제(quencher)로 자일렌비스피리디늄브로마이드(DPX)를 소포가 분산된 버퍼에 포함시켰다. 형광 등급은 100% 형광으로서 DPX가 포함된 완충액의 소포와 0% 형광으로서 ANTS와 DPX의 혼합물이 포함된 완충액의 소포를 고려하여 조정되었다. 소포 용액에 하이드록시부티르산 혼입은 막 구조의 변화를 유도하였으며, 이러한 변화는 하이드록시부티르산 대 지질의 비율에서 소포의 각 층의 상과 관련이 있는 것으로 관찰된다. 관찰된 결과는 머리 그룹과 꼬리 그룹 모두의 패킹 붕괴에 대한 삼투압 및 체적 효과로 인해 소포의 안정성에 의존하는 것으로 보인다.

• 한국식품영양과학회지
• /
• 제25권3호
• /
• pp.441-452
• /
• 1996

The effects of chlorophyll, tocopherols($\alpha$-tocopherol, ${\gamma}$-tocopherol and $\delta$-tocopherol), carotenoids ($\beta$-carotene and lutein), light sources, light intensities and strage temperatures on the photooxidative stability of soymilk were studied by measuring TBA value and depleted headspace oxygen(DHO) of soymilk. The samples were stored in the light storage box for 6 days and evaluated for the photooxidative stabilities. As the concentrations of chlorophyll increased, TBA value and DHO of the sample increased significantly(p<0.05), indicating chlorophyll acting as a photosensitizer. However, as the concentrations of tocopherols ($\alpha$-tocopherol, ${\gamma}$-tocopherol and $\delta$-tocopherol) and carotenoids ($\beta$-carotene and lutein) increased, TBA values and DHO of the samples decreased significantly(p<0.05). The light screening effects of carotenoids on DHO in the samples were not significantly different from the control at p>0.05. Therefore, there was no light screening effects of carotenoids on the oxidative stability of soymilk. The results indicate that tocopherols and carotenoids reduce the photooxidative stability of soymilk. $\delta$-Tocopherol was the most effective in photosensitized oxidation followed by ${\gamma}$-and $\alpha$-tocopherols in the order of increasing stability. $\beta$-Carotene was significantly(p<0.05) more effective than lutein in minimizing the chlorophyll-sensitized photooxidation of soymilk. Visible light was more effective than UV light in decreasing the photooxidative stability of soymilk. Therefore, photooxidation of soymilk containing chlorophyll is mainly due to photosensitized oxidation rather than photolysis reaction. As the intensities of fluorescence light increased, TBA values and DHO of the samples increased significantly at P<0.05. However, as the storage temperatures increased, TBA values and DHO of soymilk did not change significantly at p>0.05.

• The Plant Pathology Journal
• /
• 제25권3호
• /
• pp.286-290
• /
• 2009

The stability of three different kinds of pUC-derived plasmids, pDsRed, pZsYellow, and pGFPuv, was investigated in Pectobacterium strains to utilize those plasmids as tracers. All three plasmids pDsRed, pZsYellow and pGFPuv showed their specific colors in Pectobacterium strains. Especially, the plasmid pDsRed conferred bright pink colonies on the Pectobacterium strains. When the bacteria lost the plasmid pDsRed, the colonies turned white, suggesting that the plasmid could be a good marker system for Pectobacterium strains on different environmental conditions. The effect of the antibiotic pressure on the stability of the plasmid was different depending on the host bacteria. P. carotovorum subsp. betavasculorum was more sensitive to the antibiotic pressure than P. carotovorum subsp. carotovorum Pcc21. However, temperature change significantly affected plasmid stability on both Pectobacterium strains. Almost all strains lost the plasmids with the shift in temperature from $28^{\circ}C$ to $37^{\circ}C$. Presence of the plasmids did not affect bacterial pathogenicity on their own host plants. Among three plasmids, pZsYellow was not useful as a marker because the yellow fluorescent proteins from pZs Yellow were interfered with the yellow natural fluorescence of the plant tissues induced by the defense system. Since the red color of DsRed can be seen with naked eyes, plasmid pDsRed was applicable as a marker. However, the color change was slow so that additional manipulation to increase the expression speed was necessary. Plasmid pGFPuv could serve as a perfect marker without any problem, tracing the reproduction and spread of the plant pathogens perfectly.

• 대한환경공학회지
• /
• 제34권1호
• /
• pp.49-54
• /
• 2012

본 연구에서는 수 환경 내에서 일어나는 주요 자연분획변환 과정 중 생분해 시 변화하는 용존 유기물질의 특성이 중금속 결합특성에 미치는 영향을 조사하고자 하였다. 각각 호수와 하천 기원을 대표하는 Pony lake fulvic acid와 Suwannee river fulvic acid를 포함한 다양한 유기물을 대상으로 2주간 배양실험을 하여 변화하는 농도, 성상 및 중금속 구리 결합특성을 조사한 결과 각 시료 내 DOC농도는 감소하고 SUVA 값은 증가하였다. 특히 포도당 및 단백질계 탄소구조 함유비율이 높을수록 미생물에 의한 DOC 농도 분해율은 증가하였다. 포도당과 휴믹물질의 혼합비를 고려한 경우 배양 후 예측되는 혼합액의 DOC 감소율은 실제 측정값과 유사하였다. 그러나 SUVA값은 오히려 더 높게 나타나 생분해성 물질과 휴믹물질이 혼재할 경우 탄소 구조 변화로 인한 휴믹화의 진행이 더 크게 나타날 수 있음을 보였다. Synchronous 형광스펙트럼 결과 배양 후 Pony lake fulvic acid의 경우 휴믹산계 형광특성이, Suwannee river fulvic acid에서는 펄빅산계 형광특성이 크게 증가하였다. 포도당 시료에서는 배양 전 관찰되지 않았던 단백질계와 펄빅산계 형광특성이 관찰되었다. 중금속 구리와의 결합정도를 나타내는 log K 값은 미생물 배양 전과 후 휴믹물질 종류에 따라 변화가 없거나 혹은 약간 감소하는 경향을 나타냈다. 본 실험 결과는 미생물에 의한 휴믹물질 관련 형광구조의 증가가 중금속 결합력 강화에 영향을 미치지 않거나 오히려 감소시키는 것으로 보인다.

• 대한화학회지
• /
• 제48권6호
• /
• pp.616-622
• /
• 2004

약물 수송체로 사용되는 리포솜은 동결 건조를 통하여 분말화 시키는 방법이 사용되어지고 있다. 리포솜 안정제로서 말토스는 동결건조된 리포솜 분말의 안정성을 향상시키고 약물 봉입률에 영향을 주는 것으로 알려져 왔다. 동결건조 전과 후의 리포솜 입자의 크기를 측정하므로서 리포솜의 안정성을 평가하였고 또한, 약물 봉입률은 모델 약물인 칼세인을 사용하여 조건에 따른 봉입양을 측정하였다. 리포솜 제조 후에 말토스를 첨가한 리포솜은 수화하는 과정에서 말토스를 첨가하여 제조한 리포솜보다 훨씬 더 안정한 것으로 확인되었다. 말토스를 첨가하지 않은 리포솜은 시간이 지남에 따라 입자의 크기가 커지는 반면, 리포솜 제조 후에 말토스를 첨가한 리포솜은 $4{\sim}37^{\circ}C$에서 30일 동안 안정하다. 또한, 말토스/지질의 물농도 비가 3과 6일 때 상대적으로 가장 높은 안정성을 보였다.

• 대한약침학회지
• /
• 제18권1호
• /
• pp.44-55
• /
• 2015

Objectives: Scolopendra subspinipes mutilans (S. subspinipes mutilans) is known as a traditional medicine and includes various amino acids, peptides and proteins. The amino acids in the pharmacopuncture extracted from S. subspinipes mutilans by using derivatization methods were analyzed quantitatively and qualitatively by using high performance liquid chromatography (HPLC) over a 12 month period to confirm its stability. Methods: Amino acids of pharmacopuncture extracted from S. subspinipes mutilans were derived by using O-phthaldialdehyde (OPA) & 9-fluorenyl methoxy carbonyl chloride (FMOC) reagent and were analyzed using HPLC. The amino acids were detected by using a diode array detector (DAD) and a fluorescence detector (FLD) to compare a mixed amino acid standard (STD) to the pharmacopuncture from centipedes. The stability tests on the pharmacopuncture from centipedes were done using HPLC for three conditions: a room temperature test chamber, an acceleration test chamber, and a cold test chamber. Results: The pharmacopuncture from centipedes was prepared by using the method of the Korean Pharmacopuncture Institute (KPI) and through quantitative analyses was shown to contain 9 amino acids of the 16 amino acids in the mixed amino acid STD. The amounts of the amino acids in the pharmacopuncture from centipedes were 34.37 ppm of aspartate, 123.72 ppm of arginine, 170.63 ppm of alanine, 59.55 ppm of leucine and 57 ppm of lysine. The relative standard deviation (RSD %) results for the pharmacopuncture from centipedes had a maximum value of 14.95% and minimum value of 1.795% on the room temperature test chamber, the acceleration test chamber and the cold test chamber stability tests. Conclusion: Stability tests on and quantitative and qualitative analyses of the amino acids in the pharmacopuncture extracted from centipedes by using derivatization methods were performed by using HPLC. Through research, we hope to determine the relationship between time and the concentrations of the amino acids in the pharmacopuncture extracted from centipedes.

• 한국전기전자재료학회논문지
• /
• 제30권9호
• /
• pp.577-582
• /
• 2017

The white light of a hybrid LED is obtained by using red and green organic fluorescent layers made of polymethylmethacrylate (PMMA) films, which function as color down-conversion layers of blue light-emitting diodes. In this research, we studied the fluorescence properties of a red organic fluorophore, employing perylene bisimide derivatives applicable to hybrid LEDs. The solubility, thermal stability, and luminous efficiency are important characteristics of organic fluorophores for use in hybrid LEDs. The perylene fluorescent compounds (1A and 1B) were prepared by the reaction of 4-bromophenol and 4-iodophenol with N,N'-bis(4-bromo-2,6-diisopropylphenyl)-1, 6,7,12-tetrachloroperylene-3,4,9,10-tetracarboxyl diimide (1) in the presence of dimethyl formaldehyde (DMF) at $70^{\circ}C$. The synthesized derivatives were characterized by using $^1H-NMR$, FT-IR, UV/Vis absorption and PL spectra, and TGA analysis. Compounds 1A and 1B showed absorption and emission at 570 nm and 604 nm in the UV/Vis spectrum. We also documented favorable solubility and thermal stability characteristics of the perylene fluorophores in our work. Perylene fluorophore 1, with the 4-bromophenol substituent 1A, exhibited particularly good thermal stability and solubility in organic solvents.