• Journal of computational fluids engineering
• /
• v.21 no.4
• /
• pp.61-70
• /
• 2016

Dong-tan Station, shared by high-speed railway and urban express railway, is a very complicated underground station having 6 tracks together with barrier and shafts between them, therefore it seems very hard to investigate the aerodynamic effects including the pressure variation and train gust in the station when a high-speed train runs through it. In this study, the aerodynamic effects on the structures and platform passengers when a high-speed train runs through an underground station have been studied using Computational Fluid Dynamics. STAR-CCM+ has been employed for numerical simulation based on Navier-Stokes equation and 2-equation turbulence model and moving mesh scheme supported by STAR-CCM+ has also been used to represent the relative motion between a train and station. Based on the simulation results, the unsteady flow fields in the underground station induced by the high-speed train have been analyzed and the pressures on the PSDs and pressure variation at the platform have quantitatively assessed.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2002.10a
• /
• pp.273-276
• /
• 2002

Many artificial steel reefs are being built in Japan, however, in Korea, only few steel reefs were manufactured by POSCO, recently. In order to develop their novel types suitable for marine environments near the Korean Peninsula, it is very important to carry out model tests in the initial design stage. In the Ocean Engineering Wide Tank($L{\times}B{\times}D=30{\times}20{\times}2.5m$) and the Circulating Water Channel of the University of Ulsan, Korea, fluid drag forces acting on models of steel reefs with different sizes are measured in waves and currents. Also numerical predictions based on the Wavier-Stokes equation are made and compared with experimental results.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.16 no.2
• /
• pp.25-34
• /
• 2020

As leakage in nuclear power plants could cause a variety of problems, it is very critical to monitor leakage from the safety point of view. Accordingly, a new type of leak detection system is currently being developed and flow characteristics of the sampling and transportation system are investigated by using numerical analysis as a part of the development process in this study. The results showed that the steam mass fraction varied according to the effect of the gap between the insulation and piping component, transportation velocity, and material properties of porous media during the sampling and transportation process. The results of this study should be useful for understanding flow characteristics of the sampling and transportation system and its design and application.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1-6
• /
• 2003

The purpose of the present study is to investigate the capillary heat transportation limitation in heat pipe according to the change of screen mesh wick porosity. Diameter of pipe was 6 mm, and mesh numbers are 100, 150, 200 and 250 and water was selected as a working fluid. According to the change of wick porosity and mesh number, the capillary pressure, pumping pressure, liquid friction coefficient in wick, vapor friction coefficient, and capillary heat transportation limitation are analyzed by theoretical design method of a heat pipe. As some results, the capillary heat transportation limitation in screen mesh wick heat pipe is largely affected by wick porosity and mesh number.

• The KSFM Journal of Fluid Machinery
• /
• v.16 no.3
• /
• pp.48-53
• /
• 2013

Due to the urbanization, lots of people are living in cities. It is very convenient to live in the cities for the people but at the same time, the highly populated city has several environmental problems. During delivery process of large amount of municipal waste generated from the cities, the automobile emission and traffic jam have been occurred. The waste collection in the cities has been mainly done by using labour force and delivery truck. This is the conventional waste collection up to now. Recently, new technologies like automated waste collection system and capsule transportation have been introduced. Conventional waste collection mainly relied on the labour force and truck delivery does not need to invest a lot of money for the start-up. However, it requires to pay the operational cost both for the labour force and the truck delivery. On the contrary to this conventional waste collection, the automated waste collection and capsule transportation require high initial investment cost. However, the automated waste collection and capsule transportation can reduce significantly the pollutants emission, traffic jam by the waste trucks and actual waste collection cost per ton. In dealing with the waste collection in the cities, new waste collection technologies could be properly combined with the conventional waste collection for the effective municipal waste treatment.

• The KSFM Journal of Fluid Machinery
• /
• v.14 no.6
• /
• pp.18-25
• /
• 2011

A boundary-layer pump with a single disk has been experimented to obtain its characteristic curve by changing the impeller of a centrifugal pump to a single disk. The primary objective to use of these types of pumps is to avoid hurting water life during transportation unnecessarily. The change of impeller should degrade the performance of pump, so we used the method to increase the roughness on the disk with sandpaper and mesh. The enhancement of shear force from the rotation of disk to the internal flow brought an augmentation of momentum transport, and the characteristics were far improved from the original single-disk pump without decreasing the survival rate of water life in the case of Pseudobagrus fulvidraco (bullhead fish). However, in the case of Artemia cyst (zooplankton), the survival rate was very degraded due to the micro scale smaller than turbulent eddy size. The result of this study could be used for the design of transportation and bio-filtering of water lying on a specific bandwidth of its scale of size.

• Journal of the Korean Institute of Gas
• /
• v.19 no.5
• /
• pp.104-111
• /
• 2015

The technology development of pipeline transportation of natural gas at artic and northern ice environments should be considered with unique characteristics of permafrost territory as a very interesting and challenging area. This work is to investigate bottleneck techniques and major impact factors through a literature search to figure out the core technology of the transport pipeline. Especially, theoretical approach themes could be determined to develop the technology flow assurance for permafrost regions through documentary survey on the considerations of thermo-fluid. Also, basic results through theoretical approaches could be achieved.

• Journal of Industrial and Engineering Chemistry
• /
• v.68
• /
• pp.99-108
• /
• 2018

An oil-tolerant and salt-resistant aqueous foam system was screened out as a possible lubricant to enable cold heavy oil transportation. The microstructures and viscoelasticity and effects of heavy oil, salt and temperature on the foam stability were investigated and new rheological and drainage models were established. The results indicate the foam with multilayered shells belongs to a special microcellular foam. The viscoelasticity could be neglected due to its low relaxation time. The drainage process can be divided into three stages. The foam with quality of 67.9% maintains great stability at high oil and salt concentrations and appropriate elevated temperature.

• Journal of the Korean Society of Safety
• /
• v.19 no.3 s.67
• /
• pp.108-117
• /
• 2004

Dynamic analysis method is Presented for analyzing rectangular liquid storage structures excited by horizontal and vertical ground motions. The irrotational motion of invicid and incompressible ideal fluid in rigid rectangular liquid storage structures subjected to horizontal and vertical ground motions and the motion of fluid induced by structural deformation are expressed by analytic solutions. Analysis methods are obtained by applying analytic solutions of the fluid motion to finite element equation of the structural motion. The fluid-structure interaction effect is reflected into the coupled equation as added fluid mass matrix. The free surface sloshing motion, hydrodynamic pressure acting on the wall and structural behavior due to horizontal and vertical ground motions are obtained by the presented method.

• Earthquakes and Structures
• /
• v.22 no.4
• /
• pp.431-437
• /
• 2022

One of the best choice for transportation of oil and gas at the end of rivers or seas is concrete pipelines. In this article, a concrete pipe at the end of river is assumed under the earthquake load. The Classic shell theory is applied for the modelling and the corresponding motion equations are derived by energy method. An external force induced by fluid around the pipe is asssumed in the final motion equations. For the solution of motion equations, the differential quadrature method (DQM) and Newmark method are applied for deriving the dynamic deflection of the pipe. The effects of various parameters including boundary conditions, fluid and length to thickness ratio are presented on the seismic response of the concrete pipe. The outcomes show that the clamped pipe has lower dynamic deflection with respect to simply pipe. In addition, with the effect of fluid, the dynamic defelction is increased significantly.