• 한국재료학회지
• /
• 제11권12호
• /
• pp.1074-1079
• /
• 2001

To study the distribution of boron and the boron effect for nucleation of graphite in high carbon steel, neutron induced autoradiography method is used. High carbon steel is easy to make the graphitization by addition of boron. It is easy to analysis of boron distribution using neutron radiography with neutron fluence of $1.9$\times${\times}10^{13}/cm^2$in the boron added high carbon steel. By the neutron induced autoradiography technique, it was found that the distribution of boron depended on boron content, graphitiging temperature and time. And by the analysis of secondary ion mass spectroscopy (SIMS) and electron probe micro analysis (EPMA), boron or boride were acted at nucleation site of graphite in high carbon steel.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1307-1310
• /
• 1995

During measurement of atomic hydrogen in a silane plasma using two-photon excited laser induced fluoresecence, laser-induced dissociation of the gas was observed. This was investigated untill conditions for the input laser fluence were determined where the effect was negligible. A measurement of the atomic hydrogen distribution was then performed within the limits of these conditions. Absolute density determinations showed atomic hydrogen densities of around $3{\times}10^{17}m^{-3}$.

• Carbon letters
• /
• 제24권
• /
• pp.55-61
• /
• 2017

Carbon micropatterns (CMs) were fabricated from a negative-type SU-8 photoresist by proton ion beam lithography and pyrolysis. Well-defined negative-type SU-8 micropatterns were formed by proton ion beam lithography at the optimized fluence of $1{\times}10^{15}ions\;cm^{-2}$ and then pyrolyzed to form CMs. The crosslinked network structures formed by proton irradiation were converted to pseudo-graphitic structures by pyrolysis. The fabricated CMs showed a good electrical conductivity of $1.58{\times}10^2S\;cm^{-1}$ and a very low surface roughness.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.378.1-378.1
• /
• 2016

나노바이오연구분야에서 ToF-SIMS를 이용하여 lipid와 metabolite같은 저 분자의 생체물질을 측정하는데 널리 이용되어 왔다. 최근에는 고 분자량의 생체물질을 측정하기 위해서 C60, water cluster, argon cluster등의 다양한 종류의 클러스터 이온빔들이 개발되어 왔다. [1,2] 하지만 tissue샘플을 클러스터 이온빔을 이용하여 분석한 결과에서도 m/z 1500이상의 고분자를 측정한 결과는 거의 없다. 바이오샘플의 charging을 상쇄하기위해 low energy electron beam (~20 eV)을 사용하는데, low energy electron beam이 샘플에 damage를 주기 때문이다. [3] 본 연구에서는 electron fluence (electrons/cm2)가 증가함에 따라 PC(16:0/18:1(9Z)와 Ganglioside GM1의 intensity가 감소함을 알았고, low energy electron beam에 의해 생체 물질이 damage를 받을 수 있음을 확인하였다. 따라서 tissue 샘플을 SUS기판에 샘플링하고 Ar-GCIB를 이용하면 charging없이 tissue imaging을 성공적으로 수행할 수 있고, m/z 2000이상의 고 분자량의 생체물질을 측정할 수 있음을 확인하였다.

• Nuclear Engineering and Technology
• /
• 제49권7호
• /
• pp.1472-1482
• /
• 2017

Zirconium alloy cladding tube specimens were irradiated at $380^{\circ}C$ up to a fast neutron fluence of $7.5{\times}10^{24}n/m^2$ in a research reactor to investigate the effect of neutron irradiation on hydride reorientation and mechanical property degradation. Cool-down tests from $400^{\circ}C$ to $200^{\circ}C$ under 150 MPa tensile hoop stress were performed. These tests indicate that the irradiated specimens generated a smaller radial hydride fraction than did the unirradiated specimens and that higher hydrogen content generated a smaller radial hydride fraction. The irradiated specimens of 500 ppm-H showed smaller ultimate tensile strength and plastic strain than those characteristics of the 250 ppm-H specimens. This mechanical property degradation caused by neutron irradiation can be explained by tensile hoop stress-induced microcrack formation on the hydrides in the irradiation-damaged matrix and subsequent microcrack propagation along the hydrides and/or through the matrix.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.191-195
• /
• 2001

The applications of magnetic fluid can be normally made by 1) using changes of a property of matter caused by applied magnetic field; 2) preserving magnetic fluid at a certain position or in a magnetic fluid keeping the body in a floating condition; 3) controlling the flow of magnetic fluid by means of magnetic field. However, these are usually made by using their methods together. In this study, the natural convection flow of a magnetic fluid in annular pipes is experimentally analyzed. High temperature is kept constantly inside of a circular pipe of experimental model, on the other hand, low temperature is kept constantly outside of it. In experiments, several cases are carried out in order to clarify the fluence of direction and intensity of magnetic fields on the natural convection of magnetic fluid. Therefore magnetic fields are applied in various intensity and up and down directions by permanent magnets.

• 한국세라믹학회지
• /
• 제36권10호
• /
• pp.1123-1131
• /
• 1999

Alumina-glass composites which are considered as the material of the choice for all dental crown was prepared by aqeous-based tape casting and sintering for 2h at 1120$^{\circ}C$ followed by glass infiltration for 2h at 1100$^{\circ}C$ Biaxial strength and fracture toughness of the composites were evaluated to determine the optimum composition of the tape as a function of the amount of constituent such as alumina binder and plasticizer. The strength and the fracture toughness of the alumina tape increased with increasing the contents of alumina and binder. These observations are consistent with in fluence of the constituents on mean alumuna particle distance in tapes suggesting that high strength of the glass infiltrated alumina composites is related to toughening by crack bowing. The biaxial strength and the fracture toughness of the composite containing the optimum constituent composition were 523 MPa and 3.3 MPa$.$1/2 respectively.

• 한국재료학회지
• /
• 제9권1호
• /
• pp.25-29
• /
• 1999

We have developed a laser molecular beam epitaxy system for the layer-by-layer growth of oxide thin films. Using this system, we could grow and control oxide thin films of LaAlO$_3$in a molecular layer epitaxy mode on the atomically flat SrTiO$_3$ substrate with a LaAlO$_3$single crystal target. Very clear RHEED oscillations were observed during to growth of a LaAlO$_3$ film for a long period under the optimized conditions of substrate temperature at $650^{\circ}C$, oxygen pressure at 1$\times$10\ulcorner torr, and an incident laser fluence of 4.6J/$\textrm{cm}^2$. The height of mono-layer-LaAlO$_3$ film grown during one period of RHEED intensity oscillation was 3.8$\AA$.

• 전기학회논문지
• /
• 제66권9호
• /
• pp.1351-1358
• /
• 2017

In this work, we investigated radiation hardness of GaN-based transistors which are strong candidates for next-generation power electronics. Field effect transistors with three types of gate structures including metal Schottky gate, recessed gate, and p-AlGaN layer gate were fabricated on AlGaN/GaN heterostructure on Si substrate. The devices were irradiated with energetic protons and alpha-particles. The irradiated transistors exhibited the reduction of on-current and the shift of threshold voltage which were attributed to displacement damage by incident energetic particles at high fluence. However, FET operation was still maintained and leakage characteristics were not degraded, suggesting that GaN-based FETs possess high potential for radiation-hardened electronics.

• 한국실내디자인학회논문집
• /
• 제14호
• /
• pp.121-129
• /
• 1998

It opposition to visual luxury of Post modern Architecture a new tendency characterized as 'simplicity' emerged in architecture. It seems clear that such a tendency so called Minimal Architecture has risen as a reaction to the surfeit of sign and the mixture of languages generated by postmodernism. This new simplicity is also related to the tradition of Modern Architecture and the Minimal Art Movement is 1960's. They adopted simple is also related to the tradition of Modern Architecture and the Minimal Art Movement is 1960's. They adopted simple primary Volume to avoid the main fluence on the already chaotic urban environment As a result a strong monumentality is achieved. The main interests for 'minimal' architects seem to be the making of simple structure and the repetition of modular elements to achieve an economic and efficient construction method. Transparent and honest expression is preferred instead of attaching another ornament skin on to the skeleton of the architecture.