• 한국입자에어로졸학회지
• /
• 제15권2호
• /
• pp.57-65
• /
• 2019

Recently, there has been much research on the effect of fine dust on human body with increasing interest in the fine dust. Thermal power plant, which is considered as one of the main sources of fine dust, is reported to be responsible for 14% of the total amount of domestic fine dust in the Republic of Korea. Therefore, dust collecting devices in the thermal power plant need to be improved. In this study, the electrostatic precipitator (ESP) was considered to substitute for a mist eliminator used in flue gas desulfurization facility. By considering real situation in the flue gas desulfurization facility, the collection efficiency of the ESP was evaluated by using the sprayed limestone slurry particles. The collection efficiency of the ESP was higher than that of the mist eliminator, showing the possibility of replacing the mist eliminator with the ESP in flue gas desulfurization facility.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 2001년도 추계 학술발표회 논문집
• /
• pp.303-310
• /
• 2001

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.800-803
• /
• 2007

Gasification has been regarded as a core technology in dealing with environmental pollutants and in obtaining higher efficiency for power generation. Among several ways in utilizing produced syngas from gasification, power generation would be the most prominent application. Syngas from coal was applied to the readily available LPG engine from automobiles. Main purpose was to identify the combustion characteristics in the modified gas engine when using syngas of low heating value and to test the modification optionsin the LPG gas engine. Gas engine rpm and the corresponding flue gas composition were measured for each syngas input condition. Results showed that even with syngas at the heating value of $1300{\sim}1800$ kcal/$Nm^3$ corresponding to the $6{\sim}7%$ of LPG heating value, gas engine operated successfully only with the problems of high CO and oxygen concentrations in the flue gas.

• 한국연소학회지
• /
• 제16권4호
• /
• pp.23-30
• /
• 2011

In the iron and steel manufacturing, sintering process precedes blast furnace to prepare feed materials by agglomerating powdered iron ore to form larger particles. There are several techniques which have devised to improve sintering production and productivity including flue gas recirculation(FGR) and additive gas enriched operation. The application of those techniques incurs variations of process configurations as well as inlet and outlet gas conditions such as temperature, composition, and flow rate which exert direct influence on reactions in the bed or the operation of the entire plant. In this study, an approach of sintering bed modeling using flowsheet process simulator was devised in consideration of FGR and the change of incoming and outgoing gas conditions. Results of modeling for both normal and FGR sintering process were compared in terms of outgoing gas temperature, concentration, and moisture distribution pattern as well as incoming gas conditions. It is expected to expand the model for various process configurations with FGR, which may provide the usefulness for design and operation of sintering plant with FGR.

• Korean Chemical Engineering Research
• /
• 제59권1호
• /
• pp.60-67
• /
• 2021

본 연구에서는 CO2 포집을 포함하는 500 MWe 급 전기를 생산하는 순산소 석탄화력발전소에 대한 공정흐름도를 제시하였고, 기술경제성 평가를 수행하였다. 이 석탄화력발전소는 순환 유동층 보일러(CFB), 초초 임계 증기 사이클 증기 터빈, 보일러에서 배출되는 배기가스내 수분과 오염물질을 제거하는 배기가스 정제 장치(FGC), 산소 분리 초저온 공정(ASU), 이산화탄소를 분리하는 극저온 공정(CPU)을 포함한다. 건식 배기가스 재순환(FGR)은 CFB연소기내 온도 제어와 고농도 CO2 배출을 위하여 사용되었다. 이 순산소 석탄화력발전소의 열효율을 증가시키기 위하여 FGR 흐름에 대한 열교환, ASU에서 배출되는 질소 흐름에 대한 열교환, 그리고 CPU 내 기체 압축기의 열 회수를 고려하였다. FGR열교환기의 온도차(ΔT)의 감소는 배기가스의 더 많은 폐열 회수를 의미하며, 전기 및 엑서지 효율을 증가시켰다. FGR열교환기의 ΔT가 10 ℃ 에서 FGR과 FGC 주변의 연간 비용이 최소가 되었다. 이때, 전기 효율은 39%, 총투자비는 1371 M$, 총생산비용은 90 M$, 그리고 투자수익률은 7%/y, 그리고 투자회수기간은 12년으로 예측되었다. 본 연구를 통하여 순산소 석탄화력발전소의 열효율 향상을 위한 열교환망이 제시되었고, FGR 열교환기의 최적 운전 조건이 도출되었다.

• 태양에너지
• /
• 제9권3호
• /
• pp.64-72
• /
• 1989

In this study, the computer simulation for the heat transfer in pulse combustion water heater is performed. The attention is focused to the effects of the installation of corebuster in the flue tube on heat transfer. The energy equations are established for both wall and gas side in the combustion chamber, flue way, exhaust chamber and muffler, and the numerical calculation is executed. Zone method takes longer computer calculation time compared with semi-zone method. Semi-zone method is chosen for numerical calculation. As a result of this study, it is found that the installation of the core buster in flue tube increases total heat transfer. It is also found that the total heat transfer is increased with the increasing of the ratio of the cross section area of corebuster to that of the flue tube. However, the heat transfer effect is negligible for the area ratio above 0.5.

• 한국연초학회지
• /
• 제23권2호
• /
• pp.162-167
• /
• 2001

This study was carried out to quantitatively determine phenol compounds in smoke total particulate matter(TPM) to evaluate the qualititive characteristics of flue-cured tobacco varieties(NC82, KFl14 and KFl18). After collecting The TPM by using smoking machine, the concentration of phenol compounds were analyzed by gas chromatography as their trimethylsilyl derivative on a fused capillary column bonded with a 5％ PE ME siloxane stationary phase. In all the flue-cured tobacco varieties, the major phenol components were monohydroxy compounds. The order of the highest concentration of total phenol compounds in TPM was NC82, KF114 and KFl18 but the contents of dihydroxy compound in the KFl18 was higher than those of NC82 and KF114.

• 한국연초학회지
• /
• 제8권2호
• /
• pp.51-66
• /
• 1986

Volatile aroma components, non-volatile organic acids in lamina and stems of flue-cured(NC 2326) and burley ( Burley 21) were analyzed by gas chromatography and mass spectrometry, respectively. Then compositional differences of these components between lamina and stems were discussed. The contents of volatile components were higher in flue-cured than in burley tobacco, and it was also higher in lamina then in stem. The major aroma components in lamina were neophytadiene , nicotine, solanone and benzyl alcohol but those in stems were palmitic acid, neophytadiene, nicotine, solanone and phenyl ethyl acetate. On the other hand, the contents of non-volatile organic acids were higher in burley than in flue-cured tobacco, and these values of burley tobacco were higher in lamina than in stem but flue-cured tobacco were higher in stem than in lamina. The major acids in all the above four tabacco samples were malic, citric, oxalic and linolenic acid.

• 한국연초학회지
• /
• 제6권1호
• /
• pp.25-31
• /
• 1984

The volatile aroma components were isolated from Korean flue-cured tobacco (N.C. 2326) by using a vacuum steam distillation method. Individual aroma components were identified by GCIMS and comparison of gas chromatowaphic retention time with those of the authentic samples. Sensory analysis showed that a vacuum steam-distilled product of Flue-cured tobacco had a typical haylike, floral and fruity aroma. Among 62 compounds identified, major compounds included neophytadiene, benzyl alcohol, ethyl acetate, phenyl ethyl alcohol, ethyl alcohol, ethyl formate, acetic acid, solanone, 2-acetyl pyrrole, $\beta$-ionone epoxide, 2, 4-heptadienal (2 isomers), megastigmatrienone (4 isomers), furfural and total amounts of 13 compounds were about 80%.

• Korean Chemical Engineering Research
• /
• 제50권3호
• /
• pp.516-521
• /
• 2012

본 연구는 연소기체로부터 $CO_2$ 기체를 포집하는 기포 유동층 흡착 및 재생 반응기 공정의 주요 운전변수의 영향을 조사하기 위해서 단순화된 공정모델을 개발하였다. 반응속도와 반응기에서 고체입자의 평균체류시간을 이용하여 흡착탑과 재생탑에서 각 반응 전환율을 계산하였다. 실험실 규모 기포 유동층 공정에 적용하여 $CO_2$ 포집효율에 대한 온도, 기체유속, 고체순환속도, 연소기체 중 수분농도의 영향을 조사하였다. $CO_2$ 포집효율은 흡착탑의 온도 혹은 유속이 증가함에 따라서 감소하였다. 그러나 연소기체의 수분농도 혹은 재생탑의 온도가 증가함에 따라서 증가하였다. 계산된 $CO_2$ 포집효율은 측정값과 잘 일치하였다. 그러나 본 모델은 $CO_2$ 포집효율에 대한 고체순환속도의 영향과 잘 일치하지 않았다. 이의 해석을 위해서는 기체-고체 접촉효율에 대한 이해가 더 필요하였다.