• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.853-858
• /
• 2004

In order to develop a high speed train, various conditions have been considered. Fatigue strength assessment by the fluctuation of pressure is an important one. When high speed train passing though tunnels, the pressure wave is generated in tunnels and pressure variation by the wave is acting on carbody structure with dynamic load repeatedly. In this study, formulation for reliability based fatigue assessment method has been performed when the high speed train passes through tunnels. The formulation was based on structural reliability index method and followed the proposed ISO method. The result by this study would be a good guidance to calculate the fatigue life and reliability index of body structure.

• Proceedings of the KWS Conference
• /
• 2003.05a
• /
• pp.87-89
• /
• 2003

The yield strengths of austenitic stainless steel have been approximately doubled by increasing the nitrogen content. But, the increasing the nitrogen cause of increase the pressure of metal vapor inside the keyhole in electron beam welding. During welding, eruptions of keyhole often occur that cause excessive spatter, concavity, and porocity in the weld zone. Additionally the fast evaporation of nitrogen content cause of decrease the strength of weld zone. Therefore in this paper, we investigated of the weldability of electron beam welding and the change of chemical content after welding for strengthened austenitic stainless steel, measured the deformation scale of both of electron beam and narrow gap TIG and the spike fluctuation in the root.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2008.10a
• /
• pp.25-29
• /
• 2008

본 연구에서는 스포츠웨어 착용 시 운동 속도별로 직물이 스치면서 발생하는 마찰음에 대한 음향특성과 주관적 감각 감성을 고찰하기 위하여, 3종류의 스포츠웨어용 직물 마찰음을 walking(0.63m/s), jogging(1.10m/s), running(0.98m/s)의 3가지 속도로 녹음한 후, 총음압(SPL)과 Loudness(Z), Sharpness(Z), Roughness(Z), Fluctuation Strength(Z)를 계산하였다. 이들 마찰음에 대한 주관적 평가는 9개 쌍의 형용사(시끄러운, 높은, 날카로운, 거친, 딱딱한, 탁한, 변화있는, 거슬리는, 불쾌한)에 대해 의미미분척도로 평가되었다. Jogging시 직물의 마찰음은 가장 시끄럽고 거슬리며 불쾌하게 평가되었고, running시의 직물 마찰음은 walking시나 jogging시의 마찰음보다 덜 시끄럽고 거칠기와 탁한 정도가 적으며 거슬리고 불쾌한 정도가 가장 적게 평가되었다.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2001.05a
• /
• pp.232-236
• /
• 2001

In this paper, we consider the problem of estimation of average radar cross section (RCS) for Swerling 1 fluctuation model, based on the maximum likelihood (ML) estimation method. In a mathematical development we take into account the event that target strength is lower than detection threshold, or the target is not detected. Our ML estimation for the SWR uses the score function that is the joint probability-pdf of the events and random variables. The solution to the ML estimation reduces to an expression in the from of a contraction mapping. The computational efficiency of the contraction mapping theorem is significant in computing the ML estimation as compared with other root-finding algorithms fur most radar tracking conditions.

• Science of Emotion and Sensibility
• /
• v.15 no.2
• /
• pp.201-208
• /
• 2012

The objectives of this study were to investigate the psychoacoustic properties of PTFE(Poly tetra Fluoroethylene) laminated vapor permeable water repellent fabrics which are frequently used for sportswear, to examine the relationship among fabrics' basic characteristics, mechanical properties and the psychoacoustic properties, and finally to propose the predicting model to minimize the psychoacoustic fabric sound. A total of 8 specimens' frictional sound were recorded and Zwicker's psychoacoustic parameters such as loudness(Z), sharpness(Z), roughness(Z), and fluctuation strength(Z) were calculated using the Sound Quality Program. Mechanical properties of specimens were measured by KES-FB system. Loudness(Z) of specimen D-1 was the highest, which means the rustling sound of the specimen D-1 was the most noisy. Statistically significant difference among film type was observed only in loudness(Z) for fabric sound. Based on ANOVA and post-hoc test, specimens were classified into less loud PTFE film group (groupI) and loud PTFE film group (groupII). Loudness(Z) was higher when staple yarn was used compared when filament yarn was used. According to the correlation between the mechanical properties of fabrics and loudness(Z) in groupI, the shear properties, compression properties and weight showed positive correlation with loudness(Z). According to the regression equation predicting loudness(Z) of groupI, the layer variable was chosen. In groupII, variables explaining the loudness(Z) were yarn types and shear hysteresis(2HG5).

• Journal of the Korea Concrete Institute
• /
• v.17 no.2 s.86
• /
• pp.273-297
• /
• 2005

In construction site, there are some occasions where concrete under initial curing is being affected by nitration from nearby vibration sources. To study these effects, in this paper, strength characteristics of concrete specimens subjected to continuous vibration up to 12 hours in vertical direction after concrete placement were observed. And through the vibration time control experiment where a number of time combinations consisted of times before and after applying vibration during initial curing period were used as experimental parameters, possibility of concrete strength improvement was investigated. From the experimental results, it could be seen that the concrete strengths were mostly decreased due to the increase of vibration velocity during initial curing period. But fluctuation ratio of concrete strength did not have any close correlations with the vibration times. And results of vibration time control experiment showed that if times before applying vibration sustains at least more than 3 hours, subsequent vibrations after that hours do not affect the concrete strength in any unfavorable ways.

• Journal of the Korean Geosynthetics Society
• /
• v.16 no.1
• /
• pp.73-83
• /
• 2017

Laboratory and in-situ tests were conducted to evaluate the cone factors for the layers with low plasticity containing a lot of silty and sand soils from the west coast (Incheon, Hwaseong and Gunsan areas) and its applicability was evaluated based on these results. The cone factors were evaluated from 19 to 23 based on unconfined compression strengths (qu), from 13 to 13.8 based on simple CU strengths and from 11.6 to 13.1 based on field vane strengths, respectively. The unconfined compression strengths of undisturbed silty soil samples with low plasticity were considerably underestimated due to the change of in-situ residual effective stress during sampling. Half of unconfined compression strength (qu/2) based cone factors of silty soils with low plasticity fluctuated and were approximately 1.8 times higher than simple CU based values of these soils. When evaluating cone factors of these soils, it should be judged overall on the physical properties such as the grain size distribution and soil plasticity and on the fluctuation of the corrected cone resistance and the sleeve friction due to the distribution of sandseam in the ground including pore pressure parameter.

• Journal of the Korean Geographical Society
• /
• v.45 no.6
• /
• pp.788-805
• /
• 2010

The present USN (Ubiquitous Sensor Networks) node deployment practices have many limitations in terms of positional connectivity. The aim of this research was to minimize a redundancy of USN route nodes, by integrating spatially weighted parameters such as visibility, proximity to cell center, road density, building density and cell overlapping ratio into a comprehensive GIS database. This spatially weighted approach made it possible to reduce the number of route nodes (11) required in the study site as compared to that of the grid network method (24). The field test for RSSI (Received Signal Strength Indicator) indicates that the spatially weighted deployment could comply with the quality assurance standard for node connectivity, and that reduced route nodes do not show a significant degree of signal fluctuation for different site conditions. This study demonstrated that the spatially weighted deployment can be used to minimize a redundancy of USN route nodes in a routine manner, and the quantitative evidence removing a redundancy of USN route nodes could be utilized as major tools to ensure the strong signal in the USN, that is frequently encountered in real applications.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.8
• /
• pp.441-446
• /
• 2005

This paper presents the changes of acoustic scattering pattern from a single cylinder and two identical cylinders in both theoretical calculations and experimental measurements. Bi-static scattering pattern by single cylinder and two parallel cylinders (length 2m, radius 30mm) was measured in $5m\times5m\times5m$ water tank using high frequency projector (120 kHz) and hydrophone. The results show similar agreement between experiment and theory. In case of single cylinder scattering. omni-directional pattern was observed in backward but there are fluctuations or target strength in forward. Interference between each cylinder's scattering fields produce fluctuations of target strength in all directions of two cylinders.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.37 no.2
• /
• pp.27-34
• /
• 2014

In this paper, we investigate the statistical correlation of the time series for temperature measured at the heat box in the automobile drying process. We show, in terms of the sample variance, that a significant non-linear correlation exists in the time series that consist of absolute temperature changes. To investigate further the non-linear correlation, we utilize the volatility, an important concept in the financial market, and induce volatility time series from absolute temperature changes. We analyze the time series of volatilities in terms of the de-trended fluctuation analysis (DFA), a method especially suitable for testing the long-range correlation of non-stationary data, from the correlation perspective. We uncover that the volatility exhibits a long-range correlation regardless of the window size. We also analyze the cross correlation between two (inlet and outlet) volatility time series to characterize any correlation between the two, and disclose the dependence of the correlation strength on the time lag. These results can contribute as important factors to the modeling of forecasting and management of the heat box's temperature.