• Journal of the Korean Vacuum Society
• /
• v.22 no.6
• /
• pp.321-326
• /
• 2013

The effect of rapid thermal annealing (RTA) on the optical properties of digital-alloy InGaAlAs multiple quantum well (MQW) structures have been investigated by using photoluminescence (PL) and time-resolved PL measurements as a function of RTA temperature. The MQW samples were annealed from $700^{\circ}C$ to $850^{\circ}C$ for 30 s in a nitrogen atmosphere. The MQW sample annealed at $750^{\circ}C$ exhibited the strongest PL intensity and the narrowest FWHM (Full width at half maximum), indicating the reduced nonradiative recombination centers and the improved interfaces between the wells and barriers. The MQW samples annealed at $800^{\circ}C$ and $850^{\circ}C$ showed the decreased PL intensities and blueshifted PL peaks compared to $750^{\circ}C$-annealed sample. The blueshift of PL peak with increasing RTA temperatures are ascribed to the increase of aluminum due to intermixing of gallium (Ga) and aluminum (Al) in the interfaces of InGaAs/InAlAs short-period superlattices. The decrease of PL intensity after annealing at $800^{\circ}C$ and $850^{\circ}C$ are attributed to the interface roughening and lateral composition modulation caused by the interdiffusion of Ga and Al and indium segregation, respectively. With increasing RTA temperature the PL decay becomes slower, indicating the decrease of nonradiative defect centers. The optical properties of digital-alloy InGaAlAs MQW structures can be improved significantly with optimum RTA conditions.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.2
• /
• pp.36-46
• /
• 2009

The objective of this study is to analyze the effect of artificial soil ground on a structure. When the artificial soil ground is planted, the technical factors to be considered will be the load for buildings and the growth of plants. There are no current studies of the effect of artificial soil ground on a structure and this study will analyze the load effects of artificial soil ground, which mixes both pearlite and natural soil on structures. The load affecting the structures due to artificial soil ground will be maximized when the artificial soil ground becomes saturated, and which would occur when the rainfall intensity exceeds the infiltration capacity of the artificial soil ground. In order to determine whether the artificial soil ground has reached saturation or not, a 10 years frequency and 10 minutes rainfall intensity which is used for in urban drain design, is utilized. The hydraulic conductivity of artificial soil and mixed soil has been changed depending on the proportion of the mix, It has a range of fluctuation in the degree of hardening, in particular, but does not exceed the 10 minutes rainfall intensity over 10 years frequency in the most cases. Therefore, it would be efficient to apply the saturated unit weight of artificial soil ground as the design load of a structure.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.6 no.4
• /
• pp.24-36
• /
• 2003

In this study, we estimated the seasonal fluctuations of water quality and effect of small tide embankment in coastal water around the Muan Peninsula, which is located in the northern part of Mokpo city, and layer farming ground is spread around there. Some physical and chemical factors were analyzed to characterize water quality from Jan. to Oct. in 1994. The results were as follows: Dissolved oxygen was slightly under saturation in the almost areas of July, and in some bottom layer at ebb tide of October. Distribution of COD showed high values that over 2㎎/L in October and flood tide of April by the discharge of freshwater and resuspension of benthic sediment, which exceeded water quality criteria II. Maximum values of dissolved inorganic nitrogen ware appeared in surface layer during the flood tide of October, while minimum of that showed in surface layer in April. Concentration of dissolved inorganic phosphorus was higher at July than the others, which ranged from 0.24 to 2.08㎍-at/L. Mostly mean values of N/P ratio were lower than 16, it mean that nitrogen is more limiting nutrient than phosphorus for the growth of phytoplankton. The values of eutrophication index were in the range of 0.07~0.81. However, very high values due to increase of COD were estimated near the tide embankment and southern part in relation to tidal current in October. Water quality around tide embankment was suddenly changed worse within a short period after opening the water gate during the rainfall.

• The Korean Journal of Pesticide Science
• /
• v.4 no.2
• /
• pp.50-55
• /
• 2000

Occurrence, Injury aspects and control effect of some chemicals were investigated on tomato in plastic house from 1997 to 1998. Adults trapped by yellow sticky trap and sweeping net were increased from late May abruptly. Survey of population densities by yellow sticky trap was more clear than sweeping net. Damaged leaves were found out all the year round in continuous cropping fields and rate of damaged leaves was below 20% in early April and increased gradually up to 80% level after late May. Otherwise, damaged leaves were appeared from 6 weeks after transplanting in first growing field and then damaged leaves was 80% level in spring culture. In autumn culture, rate of damaged leaves was maintained 80% level from transplanting to harvesting date regardless of cultivation years. Number of adults was trapped from late May and peak was late June but mature larva was $6{\sim}8$ individuals in spring culture. In autumn culture, adult and larval densities was maintained high for 3 weeks after transplanting but begun to decrease from 4 weeks(early September). Chlorfenapyr EC, cyromazine WP and abamectin EC could suppress larval populations of Liriomyza trifolii effectively.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.7 no.2
• /
• pp.209-222
• /
• 1997

Authors surveyed the ground water near the waste disposed from a fiberglass production factory to confirm the presence of glassfiber in the water and to determine the effect of sampling conditions and storage on the recovery of fibrous materials in the ground water. Sample was collected at every 4 hours for 48 hours consecutively. After finishing the 48 hours sample, water sampling was done from each tap after repeated turning on and off the water for 30 seconds at each time. Sample was collected in the two 1.5 liter polyethylene bottle after vigorously shaking the bottle with the same water several times with the flowing tap water. At each paired sample, one bottle was stored stand still at room temperature, and the other sample was filtered immediately after sampling. Water was filtered on the Mixed Cellulose Ester filter with negative pressure. Each sample was divided into upper and lower layer. The other bottle was stored at room temperature standstill for 7 days and filtered in the same fashion as the other pair of sample did. Each MCE filter was divided into 4 pieces and one piece was treated with acetone to make it transparent. Each prepared sample was observed by two researchers under the light and polarizing microscopy, scanning electron microscopy and energy dispersive X-ra microanalysis. Fibers were classified by the morphology and polarizing pattern under the polarizing microscope, and count was done. 1. There was a significant fluctuation in number of the fibers, but there was no specific demonstrable pattern. 2. Non-polarizing fibers frequently disappeared after 7 days's storage. But cluster of fibers were found at the wall of the same container by scratching technique. 3. Polarizing fibers were usually found in between the filter and the manicure pasted area. Possible explanations for this phenomenon will be that either these fibers are very light or have electronic polarity. Hence, these fibers are not able to be attached on the surface of slide glass. 4. Under the scanning electron microscopic examination, the fibers which are not refractive under the light microscopy were identified as glassfiber. Other fibers which is refractive under the polarizing microscopy were identified as magnesium silicate fibers. It is strongly suggested that development of standardized method of sample collection and measurement of fibrous material in the water is needed.

• Parasites, Hosts and Diseases
• /
• v.32 no.4
• /
• pp.259-266
• /
• 1994

The role of macrophages was observed In intranasally infected CSH/HeJ mice with trophozoites (3 ×105) of Acnnthomoeba culbertsoni which was a kind of free-living amoebae inducing meningoencephalitis in human and experimental animals. The mortality was 60% in the group of intraperitoneally injected mice with silica (0.5 mg/0.5 ml). It was much higher than that of 10% in the group of amoeba infected mice without silica administration. The phagocytic index of peritoneal macrophages co-cultured with Toxoplasma gondii was estimated daily. In contrast to the control and amoeba infected group which didn't show significant fluctuation of the phagocytic indices, the silica administrated group revealed under 3% until day 3, and gradual increase up to 24.7% in day 5 which was same level of amoeba infected group without silica administration. The level of interleukin- lb (IL- lb) measured by ELISA was the highest in the amoeba infected group without silica injection and the lowest in the amoeba infected group with silica administration. In the test of the amoebicidal activity of mice peritoneal macrcphages Dl uitro, silica administration revealed reducing effect on amoebicidal activity of macrophages. In conclusion, macrophages were proven to play a significant role in defense mechanism against the development of experimentally induced Acnnthamoebo menigoencephalitis.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.6
• /
• pp.423-430
• /
• 2013

In this research, a paramteric study to account for the effect of interfacial strength and nanotube agglomeration on the elastoplastic behavior of carbon nanotube reinforced polypropylene composites is performed. At first, the elastoplastic behavior of nanocomposites is predicted from molecular dynamics(MD) simulations. By combining the MD simulation results with the nonlinear micromechanics model based on the Mori-Tanaka model, a two-step domain decomposition method is applied to inversely identify the elastoplastic behavior of adsorption interphase zone inside nanocomposites. In nonlinear micromechanics model, the secant moduli method combined with field fluctuation method is used to predict the elastoplastic behavior of nanocomposites. To account for the imperfect material interface between nanotube and matrix polymer, displacement discontinuity condition is applied to the micromechanics model. Using the elastoplastic behavior of the adsorption interphase zone obtained from the present study, stress-strain relation of nanocomposites at various interfacial bonding condition and local nanotube agglomeration is predicted from nonlinear micromechanics model with and without the adsorption interphase zone. As a result, it has been found that local nanotube agglomeration is the most important design factor to maximize reinforcing effect of nanotube in elastic and plastic behavior.

• Journal of the Society of Naval Architects of Korea
• /
• v.54 no.5
• /
• pp.406-414
• /
• 2017

An experimental study in a recirculating water channel was carried out to investigate the effect of large coherent structures to the skin friction on a flat plate. Particle Image Velocimetry (PIV) technique was used to quantify characteristic features of coherent structures growing to the boundary layer. In the PIV measurement, it is difficult to calculate the friction velocity near the wall region due to laser deflection and uncertainty so that Clauser fitting method at the logarithmic region was adopted to compute the friction velocity and compared with the one directly measured by the dynamometer. With changing the free-stream velocity from 0.5 m/s to 1.0 m/s, the activity of coherent structures in the logarithmic region was increased over three times in terms of Reynolds stress. The flow field was separated by Variable Interval Time Averaging (VITA) technique into the weak and the strong structure case depending on the existence large coherent structures in order to validate its effectiveness. The stream-wise velocity fluctuation was scanned through at the boundary thickness whether it had a large deviation from background flow. With coherent structures connected from near-wall to the boundary layer, mean wall shear stress was higher than that of weak structure case. Proper Orthogonal Decomposition (POD) analysis was also applied to compare the energy budget between them at each free-stream velocity.

• Biomedical Science Letters
• /
• v.6 no.4
• /
• pp.237-244
• /
• 2000

It has been reported that plasma membrane activity of the spermatozoa may be susceptible to be influenced by extracellular osmolality and such membranous changes involve infracellular molecular changes, special regard to the structure of membranous lipids, and the accompanying ion-channel of which are closely related with their fluidity of $Ca^{2+}$ and HCO$^{-}_{3}$. It is of common recognition that a certain kind of sterol acceptor player an important to induce lipid fluctuation of the sperm plasma membrane which have been influenced by BSA administration and came in effect to outflow of cholesterol from the spermatozoa and resulted in changes of ionic fluidity to facilitate adenylyl cyclase, and to induce protein tyrosine phosphorylation by increase of cAMP and activation of PKA. Thus it seems likely that an augmentation of the acrosomal reaction is closely related with protein tyrosine phosphorylation. The following experimental results were obtained in the present study; Under the high osmolality conditions, the spermatozoa motility declined significantly and the structural change of the plasma membrane diminished to confirm that the response degrees to the osmolality depended upon the water transfer volume through the plasma membrane and the changes of cellular volume. Those experimental results suggest that a physiological parameter such as low temperature condition played an important role for presentation of spermatozoa and that inducement of spermatozoa activation for reinforcement of protein tyrosine phosphorylation. On the other hand, it seemed likely that the BSA administration as one of sterol accepters might represent a key role also under the high osmolality condition and their result also suggests that osmolality change, special regard to high osmolality condition may play an important role also in the processes of signal transmission.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.293-293
• /
• 2014

Over last decade InGaN alloy structures have become the one of the most promising materials among the numerous compound semiconductors for high efficiency light sources because of their direct band-gap and a wide spectral region (ultraviolet to infrared). The primary cause for the high quantum efficiency of the InGaN alloy in spite of high threading dislocation density caused by lattice misfit between GaN and sapphire substrate and severe built-in electric field of a few MV/cm due to the spontaneous and piezoelectric polarizations is generally known as the strong exciton localization trapped by lattice-parameter-scale In-N clusters in the random InGaN alloy. Nonetheless, violet-emitting (390 nm) conventional low-In-content InGaN/GaN multi-quantum wells (MQWs) show the degradation in internal quantum efficiency compared to blue-emitting (450 nm) MQWs owing higher In-content due to the less localization of carrier and the smaller band offset. We expected that an improvement of internal quantum efficiency in the violet region can be achieved by replacing the conventional low-In-content InGaN/GaN MQWs with ultra-thin, high-In-content (UTHI) InGaN/GaN MQWs because of better localization of carriers and smaller quantum-confined Stark effect (QCSE). We successfully obtain the UTHI InGaN/GaN MQWs grown via employing the GI technique by using the metal-organic chemical vapor deposition. In this work, 1 the optical and structural properties of the violet-light-emitting UTHI InGaN/GaN MQWs grown by employing the GI technique in comparison with conventional low-In-content InGaN/GaN MQWs were investigated. Stronger localization of carriers and smaller QCSE were observed in UTHI MQWs as a result of enlarged potential fluctuation and thinner QW thickness compared to those in conventional low-In-content MQWs. We hope that these strong carrier localization and reduced QCSE can turn the UTHI InGaN/GaN MQWs into an attractive candidate for high efficient violet emitter. Detailed structural and optical characteristics of UTHI InGaN/GaN MQWs compared to the conventional InGaN/GaN MQWs will be given.