• 교육시설 논문지
• /
• 제25권6호
• /
• pp.21-28
• /
• 2018

To compare the physical quantity of students circulation along the moving path during recess of a variation type operation middle school, five points were actually observed. The flow coefficient for these points was calculated, and the change in flow coefficient was verified and tracked over time. During the operation of the classroom, the characteristics of crowdedness and congestion time depending on the physical conditions of the frequently moved paths were shown. Even in the same corridor, the difference between the flow coefficient and the congestion time of the corridor facing the open space and the blocked space was noticeably different. As a result, detailed factors such as free walking speed, the degree of freedom of passing and the possibility of collision were also identified. This means that detailed countermeasures for the student's path should be considered first when planning the moving space of a variation type school, and identifying the characteristics of these factors could be used as useful basic materials for developing various models of classroom space.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권3호
• /
• pp.389-394
• /
• 2017

The limitation of flow control for a bistable fluidic valve has been investigated. The physical model of the fluidic valve includes two main flow outlets and two control flow inlets. The experiments were conducted with pressure regulators, mass flow meters, and piezo sensors to analyze flow switching characteristics of the fluidic valve. The experimental data such as pressure and mass flow rate of control flows and the switching time of the main flow was obtained with various operating conditions. The operation limit of the fluidic valve is identified, and a model equation for pre-estimating the minimum control pressure to switch the direction of the main flow has been proposed.

• International Journal of Aeronautical and Space Sciences
• /
• 제1권1호
• /
• pp.36-47
• /
• 2000

Three-dimensional compressible turbulent flow fields within the passage of a diffusing S-duct have been simulated by solving the Navier-Stokes equations with SIMPLE scheme. The average inlet Mach number is 0.6 and the Reynolds number based on the inlet diameter is $1.76{\times}10^6$ The extended $k-{\varepsilon}$ turbulence model is applied to modeling the Reynolds stresses. Computed results of the flow in a circular diffusing S-duct provide an understanding of the flow structure within a typical engine inlet system. These are compared with experimental wall static-pressure, total-pressure fields, and secondary velocity profiles. Additionally, boundary layer thickness, skin friction values, and streamlines in the symmetric plane are presented. The computed results depict the interaction between the low energy flow by the flow separation and the high energy flow by the reversed duct curvature. The computed results obtained using the extended $k-{\varepsilon}$ turbulence model.

• 한국항공우주학회지
• /
• 제36권2호
• /
• pp.131-136
• /
• 2008

본 연구는 다양한 배열 상태에 놓인 2원주 주위의 유동장 특성을 PIV를 이용하여 파악한 것이다. 직렬배열에서 하류측 원주의 후방에서 측정한 Strouhal 수는 수평 간격비가 클수록 작게 나타났다. 직렬배열에서 2원주 사이의 흐름은 거의 정체되어 있으며, 상류측 원주에 가까울수록 정체 범위가 크게 나타났다. 직렬배열에서 자유류와 2원주의 중심선이 이루는 받음각()의 미소 변화(${\alpha}$=${\pm}1.0^{\circ}$)에 따라 2원주 사이에는 서로 반대 방향의 와류가 생성되었다. 병렬배열에서 수직 간격비가 클수록 2원주 사이의 유속이 크게 나타났다.

• 한국항공우주학회지
• /
• 제47권1호
• /
• pp.9-16
• /
• 2019

본 연구에서는 중/고고도 영역에서 운행되는 우주발사체 주위 유동에 대한 해석을 효율적으로 하기 위해 삼차원 Navier-Stokes 방정식을 해석하는 비 정렬 격자 기반의 맥스웰의 미끄럼 경계조건이 적용된 유동 해석자를 개발하였다. 유동해석자의 검증은 축대칭 형태의 blunted cone-tip 형상에 대한 해석을 통해 수행하였다. 해석 결과는 타 연구자의 실험 및 직접모사법 해석 결과와 비교를 통해 일치하는 결과를 확인하였고, 속도 슬립 및 온도 점프에 대한 예측을 통해 본 유동해석자의 신뢰성을 확보하였다. 검증된 해석자를 이용하여 고도 86km의 중/고고도 영역에서 마하수 6으로 비행하는 우주발사체에 대한 유동 해석을 수행하였으며, 중/고고도 영역에서 나타나는 유동 현상들에 대해 고찰하였다.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2014년도 추계학술발표대회
• /
• pp.234-237
• /
• 2014

This paper provides insights into the sFlow monitoring system of OF@KREONET. OF@KREONET is software defined network (SDN) testbed adapted by KREONET (Korea Research Environment Open NETwork). OF@KREONET uses SDN-based network virtualization to slice the network among multiple concurrent experimenter. Flow Monitoring of OF@KREONET using sFlow. sFlow and OpenFlow can be used to provide an integrated flow monitoring system where OpenFlow controller can be used to define flows to be monitored by sFlow. OF@KREONET flow monitoring system supports monitoring of per slice FlowSpace. An Experimental can monitor his/her own FlowSpace while network administrator can monitor all spaces.

• 한국수자원학회논문집
• /
• 제40권4호
• /
• pp.313-324
• /
• 2007

비정형격자 기반의 수치해석모형을 이용하여 지하공간침수해석모형을 개발하였다. 본 모형은 지하공간의 흐름 특성을 link-node 시스템에 의해 해석하고, 계단 및 벽구조물 등의 지하공간 구조물 배치 영향을 고려한 침수해석을 수행할 수 있다. 흐름은 두가지로 구분하며, 하나는 두 개의 인접한 격자가 지하공간에서의 지하철 노선에 해당되어 수로형 흐름을 나타내는 경우이고, 다른 하나는 지하공간에서의 지하철 노선 이외의 지점 및 지하상가 등으로 물이 확산되는 위어형 흐름인 경우이다. ArcGIS 시스템의 Visual Basic Application을 이용하여 Dual-Drainage 침수해석 모형과 지하공간침수해석 모형이 통합하였다. 개발된 통합모형은 홍수관계기관이 침수 발생이 예상되는 지점에서 홍수피해 방지를 위해 배수시스템의 용량에 대한 재설계 흑은 확장 등과 같은 대책을 수립하는데 도움을 줄 수 있고, 침수위험지도작성 및 홍수경감대책을 수립하는데 이용될 수 있다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권2호
• /
• pp.166-172
• /
• 2007

The flow around a rotating circular cylinder near a plane wall is investigated by the measurement of the lift acting on the cylinder and by the flow visualization using the hydrogen bubble technique in the circulating water tank. The experimental parameters are the rotating direction of the cylinder. the space ratios $H/D(H/D=0.05{\sim}0.5)$ between cylinder and plane wall and the velocity ratios ${\alpha}({\alpha}=0{\sim}{\pm}2.0)$. In the case of clockwise, the lift on the rotating circular cylinder was increased with the reduction of the space ratios and with the velocity ratios, the upper separation point was more shifted in the rotating direction with them. In the case of anticlockwise, the absolute value of the lift on the rotating circular cylinder was increased with increasing the space ratios and the velocity ratios. the lower separation point was more shifted in the rotating direction with them.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1252-1254
• /
• 2003

Debris flows associated with landslides occur as one of the most devastating natural disasters that threat Taiwan. Typically, three essential factors are needed simultaneously to trigger debris flow, namely sufficient soils and rocks, favorable slope, and abundant water. Among the three essentials, the slope is natural and static without external forcing, while the landslide is generally induced by earthquake or rainfall events, and the water is produced by heavy rainfall events. In this study, we analyzed the landslides triggered by the typhoons Herb (1996) and typhoon Troaji (2001). It is concluded that the statistical data are useful to quantify the threshold of the potential landslide area. Then, the possibility to prevent the debris flow occurrence may be increased.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권3호
• /
• pp.235-242
• /
• 2007

This paper discusses dynamic characteristics of a urea-SCR (Selective Catalytic Reduction) system. The urea flow rate to improve NOx conversion efficiency is generally determined by parameters such as catalyst temperature and space velocity. The urea-SCR system was tested in the various engine operating conditions governing the raw NOx emission levels, space velocity. and SCR catalyst temperature. These experiments include cold-transients to determine catalyst light-off temperature and urea flow rate transients. Likewise. ammonia storage dynamics was also investigated. The cold-transient results indicate the light-off temperature of the catalysts used in these experiments was $200-220^{\circ}C$. The ammonia storage and urea flow rate transients all indicate very slow dynamics (on the order of seconds) which presents control challenges for mobile applications. The results presented in this paper should provide an excellent starting point in developing a functional in-vehicle urea-SCR system.