• Proceedings of the KIEE Conference
• /
• 1998.07c
• /
• pp.926-928
• /
• 1998

A fast optimization algorithm has been evolved from a simple two stage optimal power flow(OPF) algorithm for constrained power economic dispatch. In the proposed algorithm, we consider various constraints such as power balance, generation capacity, transmission line capacity, transmission losses, security equality, and security inequality constraints. The proposed algorithm consists of four stages. At the first stage, we solve the aggregated problem that is the crude classical economic dispatch problem without considering transmission losses. An initial solution is obtained by the aggregation concept in which the solution satisfies the power balance equations and generation capacity constraints. Then, after load flow analysis, the transmission losses of an initial generation setting are matched by the slack bus generator that produces power with the cheapest cost. At the second stage we consider transmission losses. Formulation of the second stage becomes classical economic dispatch problem involving the transmission losses, which are distributed to all generators. Once a feasible solution is obtained from the second stage, transmission capacity and other violations are checked and corrected locally and quickly at the third stage. The fourth stage fine tunes the solution of the third stage to reach a real minimum. The proposed approach speeds up the coupled LP based OPF method to an average gain of 53.13 for IEEE 30, 57, and 118 bus systems and EPRI Scenario systems A through D testings.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.10
• /
• pp.754-760
• /
• 2008

Computation of moving interface by the level set method typically requires the reinitialization of level set function. An inaccurate estimation of level set function $\phi$ results in incorrect free-surface capturing and thus errors such as mass gain/loss. Therefore, an accurate and robust reinitialization process is essential to the simulation of free-surface flows. In the present paper, we pursue further development of the reinitialization process, which evaluates level set function directly using a normal vector on the interface without solving there-distancing equation of hyperbolic type. The Taylor-Galerkin approximation and P1P1 splitting/SUPG (Streamline Upwind Petrov-Galerkin) FEM are adopted to discretize advection equation of the level set function and the incompressible Navier-Stokes equation, respectively. Advection equation and re-initialization process of free surface capturing are validated with benchmark problems, i.e., a broken dam flow and timereversed single vortex flow. The simulation results are in good agreement with the existing results.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.08a
• /
• pp.138-141
• /
• 2002

The channel of the superconducting Flux Flow Transistor has been fabricated with plasma etching method using ICP. The ICP conditions were 700 W of ICP power, 150 W of rf chuck power, 5 mTorr of the pressure in chamber and 1:1 of Ar : $Cl_2$, respectively. The channel etched by plasma gas showed superconducting characteristics of over 77 K and superior surface morphology. The critical current of SFFT was altered by varying the external applied current. As the external applied current increased from 0 to 12 mA, the critical current decreased from 28 to 22 mA. Then the obtained $r_m$ values were smaller than $0.1\Omega$ at a bias current of 40 mA. The current gain was about 0.5. Output resistance was below $0.2\Omega$.

• Korean Journal of Optics and Photonics
• /
• v.1 no.2
• /
• pp.155-161
• /
• 1990

A Continous wave tunable $CO_2$ laser which is the slow axial flow type was construccted for the optical pumping of methyl alcohol ($CH_3OH$) laser. The reflective grating of 100 grooveslmm and 10.6$\mu\textrm{m}$ blaze wavelength was used to select wavelength. We have investigated continous outpu: power characteristics, and then have compared tuned output power profile with the gain curve of $CO_2$ laser. The optimum condition for maxium power was found at the gas mixing ratio 1 : 3 : 10 for $CO_2: N_2$ and He. under this condition the flow rate, pressure of lasing gas and discharge current are 9.5 llmin. 14 torr, and 55 mA respectively. The maxium output power was 55 Wlm. Output power of single wavelength operation was measured on 60 individual rotation vibration transitions in the P and K branches of the 9.5$\mu\textrm{m}$ band and 10.4$\mu\textrm{m}$ band in $CO_2$. The output power profile obtained from each band is well consistent with the gain curve of $CO_2$ laser and maxium tuned output power was 20 watt.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.381-384
• /
• 2011

Wave drag reduction due to the repetitive laser induced energy deposition over a flat-nosed cylinder is experimentally conducted in this study. Irradiated laser pulses are focused by a convex lens installed in side of the in-draft wind tunnel of Mach 1.94. The maximum frequency of the energy deposition is limited up to 80. Time-averaged drag force is measured using a low friction piston which was backed by a load cell in a cavity as a controlled pressure. Stagnation pressure history, which is measured at the nose of the model, is synchronized with corresponding sequential schlieren images. With cylinder model, amount of drag reduction is linearly increased with input laser power. The power gain only depends upon the pulse energy. A drag reduction about 21% which corresponds to power gain of energy deposition of approximately 10 was obtained.

• Journal of the Korean Society for Heat Treatment
• /
• v.37 no.5
• /
• pp.228-236
• /
• 2024

Low pressure carburizing is an industrially adopted process to modify the mechanical properties of the iron surface. Since acetylene gas is used as a carbon source, it has excellent carbon absorption and uniform carburizing layer compared to other carburizing gas. The superiority of carburizing properties is determined by the selection of process parameters such as acetylene flow rate and process pressure. The the effects of the pressure of acetylene as a carburizing gas on carbon transfer and surface properties of carburized specimen. AISI 4120 steel was carburized using pure acetylene at flow rates of 10, 30 sccm and pressure conditions of 1, 5, 10, 15, 20 torr. In order to investigate the carbon behavior according to the acetylene pressure, the mass gain of carbon was measured and the abnormal structure formed on the surface was observed. With the experimental results, Abnormal layers such as soot and cementite were not observed on the surface of the carburized specimens under the 10 sccm condition, and there was no significant difference in carburizing properties according to pressure. On the other hand, as the pressure increased under the condition of 30 sccm, the cementite fraction increased, and soot was formed from 15 torr, reducing the overall hardness gradient.

• Journal of Korea Multimedia Society
• /
• v.11 no.7
• /
• pp.966-976
• /
• 2008

Providing Quality-of-Service(QoS) guarantee requires the reservation of resource needed to accommodate the traffic flow of service for which resource reservation protocol(RSVP) was introduced. However, if any RSVP-capable router on the path fails to accommodate the traffic flow due to lack of resource, the flow is not allowed no matter how much surplus resources other routers on the path have. In order to solve this problem, this paper proposes a resource reservation method that can adjust adaptively the delay budget of traffic flow allocated to each RSVP-capable router in which the router uses the recently developed general-time fair queuing scheduler. The results of the simulation applying the proposed method to an evaluation network show that it may yield the gain of up to 90% compared to that in the original one in terms of the number of admitted flows.

• Journal of Power Electronics
• /
• v.17 no.2
• /
• pp.334-345
• /
• 2017

In order to meet the increasing needs of the hybrid energy source system for electric vehicles, which demand bidirectional power flow capability with a wide-voltage-conversion range, a bidirectional three-level DC-DC converter and some control strategies for hybrid energy source electric vehicles are proposed. The proposed topology is synthesized from Buck and Boost three-level DC-DC topologies with a high voltage-gain and non-extreme duty cycles, and the bidirectional operation principle is analyzed. In addition, the inductor current ripple can be effectively reduced within the permitted duty cycle range by the coordinated control between the current fluctuation reduction and the non-extreme duty cycles. Furthermore, benefitting from duty cycle disturbance control, series-connected capacitor voltages can also be well balanced, even with the discrepant rise and fall time of power switches and the somewhat unequal capacitances of series-connected capacitors. Finally, experiment results of the bidirectional operations are given to verify the validity and feasibility of the proposed converter and control strategies. It is shown to be suitable for hybrid energy source electric vehicles.

• Journal of the Korean Society of Combustion
• /
• v.13 no.2
• /
• pp.1-6
• /
• 2008

An experimental study of the flame response in a turbulent premixed combustor has been conducted with room temperature, atmospheric pressure inlet conditions using premixed natural gas. The fuel is premixed with the air upstream of a choked inlet to avoid equivalence ratio fluctuations. Therefore the observed flame response is only the result of the imposed velocity fluctuations, which are produced using a variable speed siren. Measurements are made of the velocity fluctuation in the nozzle using hot wire anemometry and of the heat release fluctuation in the combustor using chemiluminescence emission. The results are analyzed to determine the phase and gain of the flame transfer function as a function of the modulation frequency. Of particular interest is the effect of flame structure on the flame response predictions and measurements. The results show that both the gain and the phase of flame transfer function are closely associated with the flame length and structure, which is dependent upon the upstream flow perturbation as well as equivalence ratio in the current study.

• The Journal of Information Technology
• /
• v.9 no.3
• /
• pp.15-25
• /
• 2006

Currently there is fast flow of America and South Korea FTA negotiation being issued. Aim of FTA, by having free trade between two countries to gain their economical benefit. Few benefits can be expected by Korea joining FTA with America It will increase export as well as increase in overseas investment and this will lead to booming of services industry. After America and Korea FTA Discussion being announced around the world, Australia and EU also has interest of doing FTA with South Korea, which mean that America and Korea FTA has effect of bring in the overseas interest of FTA to South Korea. Expectation of American can be, create the market in South Korea to gain benefit as well as able to check out the economical issue of north east Asia country such as China and Japan. Since American side has high agreement with the make FTA with South Korea, South Korea now has to make own decision about this matter. Since Korean economy highly influence by world trade, to survive from market competition with China and Japan, Korea must involve in Free trade with world.