• 대한기계학회논문집A
• /
• 제26권10호
• /
• pp.1971-1981
• /
• 2002

Two-dimensional solidification analysis during rheology forming process of semi-solid aluminum alloy has been studied. Two-phase flow model to investigate the velocity field and temperature distribution is proposed. The proposed mathematical model is applied to the die shape of the two types. To calculate the velocities and temperature fields during rheology forming process, the each governing equations correspondent to the liquid and solid region are adapted. Therefore, each numerical model considering the solid and liquid coexisting region within the semi-solid material have been developed to predict the defects of rheology forming parts. The Arbitrary Boundary Maker And Cell(ABMAC) method is employed to solve the two-Phase flow model of the Navier-Stokes equation. Theoretical model basis of the two-phase flow model is the mixture rule of solid and liquid phases. This approach is based on using the liquid and solid viscosity. The Liquid viscosity is pure liquid state value, however solid viscosity is considered as a function of the shear rate, solid fraction and power law curves.

• Journal of Chest Surgery
• /
• 제35권8호
• /
• pp.580-583
• /
• 2002

배경: 선천성 심장병 환자들의 교정 수술 후 정확한 형태학적 혹은 혈역학적변화를 아는 것이 술 후 추가적으로 내과적 혹은 외과적인 치료가 필요로 하는가를 결성하는데 매우 중요하다. 심실중격결손 봉합술 후 잔류단락의 발생 빈도와 소량의 포편 주위 단락의 변화를 조사하였다. 대상 및 방법: 1995년 3월부터 1999년 12월까지 영남대학교의료원 흉부외과에서 영아기에 단순 심실중격결손으로 포편봉합술을 시행한 43명의 환자들을 대상으로 수술 후 심초음파를 시행하여 잔류단락 유무를 조사하였다. 결과: 전체 43례의 환자 중 수술 직후 잔류단락이 관찰된 환자는 11례로 26%에서 잔류단락이 발견되었으나 혈역학적으로 유의한 단락으로 재수술을 시행한 경우는 없었다. 단락의 발생빈도는 심실중격결손의 형태와 봉합을 위해 사용한 포편의 종류와는 무관하였다. 잔류단락이 발견된 환자 중 9명에서 단락의 소실을 확인할 수 있었으며 2례는 추적관찰에서 탈락하였다. 단락이 소실된 9명의 환자들의 단락이 마지막 확인된 기간은 평균 $4.2{\pm}3.6$개월 이었다. 결론: 수술 직후 포편 주위의 잔류단락은 종종 발견될 수 있으며 혈역학적으로 유의하지 않은 잔류단락은 대부분 6개월 이내에 자연 소실되었다.

• Journal of Korean Neurosurgical Society
• /
• 제54권2호
• /
• pp.93-99
• /
• 2013

Objective : Neurologic complications during carotid artery stenting (CAS) are usually associated with distal embolic event. These embolic incident during CAS are highly associated with the carotid plaque instability. The current study was undertaken to identify the angiographic characteristics of carotid plaque vulnerability, which was represented as filling defect in the cerebral protection filters during CAS. Methods : A total of 107 patients underwent CAS with use of a distal protection filter. Angiographic carotid plaque surface morphology was classified as smooth, irregular, and ulcerated. To determine predictable factors of filling defect in the protection filters, 11 variables were retrospectively analyzed which might influence filling defect in the protection filters during CAS. Results : Filling defects during CAS were presented in the 33 cerebral protection filters. In multivariate analysis, angiographic ulceration [odds ratio (OR), 6.60; 95% confidence interval (CI) : 2.24, 19.4; p=0.001], higher stenosis degree (OR, 1.06; 95% CI : 1.00, 1.12; p=0.039), and coexistent thrombus (OR, 7.58; 95% CI : 1.69, 34.05; p=0.08) were highly associated with filling defect in the cerebral protection devices during CAS. Among several variables, angiographic surface ulceration was the only significant factor associated with flow stagnation during CAS (OR, 4.11; 95% CI : 1.33, 12.72; p=0.014). Conclusion : Plaque surface morphology on carotid angiography can be a highly sensitive marker of plaque instability during CAS. The independent risk factors for filling defect in the filter devices during CAS were plaque ulceration, stenosis degree, and coexistent thrombus.

• 소성∙가공
• /
• 제12권1호
• /
• pp.3-10
• /
• 2003

The formation of surface defects associated with Jotting in injection molding is related to the geometries of cavity and fate, operational conditions and the rheological properties of polymer. In this study we have examined jetting phenomena in injection molding process for the throe kinds of PCs which have different molecular weights and structures, PBT and PC/ABS alloy with several injection speeds. We have used various cavity shapes those are tensile, flexural and impact test specimens with various gates and cavity thicknesses. Through this study we have observed that the jetting is related to the dic swell of material. This means that the jotting is strongly affected by the elastic flow property rather than the viscous flow property in viscoelastic characteristics of molten polymer. Different resins have different elastic properties, and elastic flow behavior depends on the shear rate of flow, i.e. injection speed. Large die swell would eliminate jetting however, the retardation of die swell would stimulate jetting. In the point of mole design, reducing the thickness ratio of cavity to gate can reduce or eliminate jetting regardless of amount of elasticity of polymer melt.

• Journal of Welding and Joining
• /
• 제33권2호
• /
• pp.85-90
• /
• 2015

Recently many studies for improvement of productivity and automation of process are in progress, and among others, laser-arc hybrid welding that combined laser and arc has attracted much attention. Since parameters by interactions as well as the parameters of each heat source should be considered, There are a lot of hardship in actual application, even though many researches have been done so far. Therefore in this study, bead welding was done to examine the effects of the flow rate of shield gas and the distance between laser and arc during laser-arc hybrid welding. As for hybrid heat source, disk laser and MIG were used. As experiment result, sound bead and weld with no defect were formed when the flow rate of front and rear shield gas were respectively 20 l/min and 15 l/min, and deep penetration was done at DLA=3 mm.

• 한국수산과학회지
• /
• 제30권1호
• /
• pp.139-147
• /
• 1997

Sediment transport around artificial habitat which is induced by the change ol flow due to installation of the structure plays a role not only as a defect function of subsidence and burial but also bottom-environment control function. This study examined the characteristics of local scouring and deposition with sediment sizes, current velocities and installation direction of artificial habitat in flow field. Resultant subsidence and burial processes are investigated and discussed with Reynolds number. Together with sediment number and dimensionless time elapse, prediction formulas are established by combining these relationships. Bottom control function as cultivating effects is discussed with installation direction, and applicability of countermeasures is compared and stone pavement method is recommended.

• 대한수의학회지
• /
• 제56권4호
• /
• pp.209-213
• /
• 2016

This study evaluated several known echocardiographic markers related to the assessment of severity in dogs with patent ductus arteriosus (PDA) after the closure of ductus arteriosus (DA). Forty-two dogs with patent ductus arteriosus were enrolled in this study. Evaluated echocardiographic markers were left atrial to aortic root ratio, left ventricular end-diastolic dimension to aortic root ratio, indexed left ventricular end-diastolic and end-systolic dimensions, end-diastolic and end systolic volume index, pulmonic flow to systemic flow (Qp/Qs) ratio, velocities of pulmonary regurgitant and systolic jets, pulmonary flow profiles and the presence of mitral regurgitation. Those markers were evaluated before, 1 day, and 30 days after the closure of DA. Statistically significant changes in some echocardiographic markers (i.e., Qp/Qs) were observed. Although several studies in human and dogs have evaluated the clinical outcome of PDA occlusion using several echocardiographic markers, this study has firstly evaluated all echocardiographic markers known to be useful for assessing the clinical outcome of PDA occlusion in human, and has demonstrated that those markers including the Qp/Qs and pulmonary flow profiles were useful in evaluating of clinical outcome of PDA in dogs and the reduction of LA and LV preload after ductal closure could dramatically reduce after successful ductal occlusion of PDA in dogs.

• Design & Manufacturing
• /
• 제2권4호
• /
• pp.54-61
• /
• 2008

Warpage, which is one of the molding trouble, acts as possible factor which results in defect in assembly. In this study, a mold was designed to produce specimens with rib parallel to flow direction, specimens with rib perpendicular to flow direction and specimens without rib. This work researched change of warpage according to injection molding condition such as injection pressure, packing pressure, packing time, resin temperature, mold temperature in non-crystalline resins(PC, ABS), crystalline resins(PP, PA66), and 30% glass fiber reinforced-resins(PC, ABS, PP, PA66).Specimens with rib and Crystalline resins show more warpage than specimens without rib and non-crystalline resins, respectively. Glass fiber reinforced-resins and specimens with rib parallel to flow direction show smaller warpage than conventional resins and specimens with rib perpendicular to flow, respectively. Specimens with rib and specimens without rib show reduced warpage as packing time increases. In addition, warpage increase as resin temperature increases. It is found that CAE shows similar tendency with experiment as packing time, resin temperature. when the rib is caused, warpage will reduce and prevent the transformation. product of a irregular form occurs warpage. In the study It'll be basic data that product occurs warpage, preferablity.

• Journal of Chest Surgery
• /
• 제27권7호
• /
• pp.624-627
• /
• 1994

Congenital coronary arteriovenous fistula is a rare cardiac defect that causes coronary arterial flow to drain into the right cardiac chambers, the pulmonary artery, the coronary sinus, or the left cardiac chambers. The most frequently involved vessel is the right coronary artery. We experienced a case that had a coronary arteriovenous fistula associated with valvular heart disease. With the cardiopulmonary bypass done under hypothermia, mitral valve replacement was accomplished and the fistulas of both proximal and distal portions of the right coronary artery were closed with 3-0 prolene. Postoperative course was uneventful.

• 대한치과의사협회지
• /
• 제54권4호
• /
• pp.252-257
• /
• 2016

This manuscript aims at discussing the technical and biological aspects of peri-implant disease. The following contents will be discussed. -The difference between peri-implantitis and peri-implant mucositis. -Prevalence of peri-implant disease. -Risk factors for peri-implantitis. -Indications and boundaries of non-surgical and surgical treatment -Treatment flow-chart by Schwarz -Limitations of non-surgical treatment -Methods to decontaminate diseased surfaces -Importance of defect configuration in surgical treatment -Biomechanical factors that influence the progression and decontamination related to peri-implantitis -Maintenance of implants.