• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.81-87
• /
• 2011

The aerodynamic features of a pantograph of a high speed train are analyzed according to shapes of pantograph covers. For this purpose, two types of pantograph covers were selected: a wedge type cover and a cone type cover. Then, the change of the aerodynamic forces of the pantograph affected by each type of the pantograph cover was computed. These results were compared with the original lift force of the pantograph. From the results, the cone type cover changes the flow direction from side to side compared with the wedge type cover. Consequently, it is confirmed that the effect of the wedge type cover on the lift force of pantograph is smaller than that of the cone type cover.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.777-782
• /
• 2001

In this study, we used In-line orifice mixer for efficient chemicals mixing in water treatment. The method of using In-line orifice mixer has been already proved the improvement of water treatment efficiency. Numerical study was performed using FLUENT, a commercial code, to standard design and production of effective In-line orifice mixer. As variable for exactly standardizing, a proper ratio between an outer diameter of cone and a diameter of pipe, a distance between cone and orifice, a determination of orifice diameter for an optimal mixing, a distance between injection nozzle's position and cone, Numerical study has been performed for optimal standard and analyzed flow field on a basis of turbulent intensity in an orifice downstream.

• 한국정밀공학회지
• /
• 제18권6호
• /
• pp.166-173
• /
• 2001

Composite materials consists of two or more different material layers. The usefulness of clad metal rods forms the possibilities of combination of properties of different metals. Copper clad aluminum composite materials are being used for economic and structural purpose. In this study, composite billet consists of commercially pure copper and aluminum(A6061) and experimental conditions consist of the combinations of clad thickness, extrusion ratio, and semi-cone angle of die. In order to investigate the influence of these parameters on the hot direct extrudability of the copper clad aluminum composite material rods, the experimental study have been performed with various extrusion temperatures, extrusion ratios, semi-cone angles of die, and composition rate of Cu:Al.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2005년도 제31회 KOSCO SYMPOSIUM 논문집
• /
• pp.287-293
• /
• 2005

Most of all combustion system has combustion instability. It is a serious problem in combustion system. Unstable injection is one of the source of combustion instability. The experimental investigation of spray characteristics for simplex swirl injector were conducted experimentally. Two kerosene based fuels were chosen as the atomizing fluid. As the major operating parameters, fuel temperature and injection pressure were chosen, and varied in the range from 253 K to 293 K and from 0.2 MPa to 1.0 MPa, respectively. Direct spray images and mean diameter were measured for the various combination of operating parameters in the flow field. The results of present study show that the injection pressure and spray cone angle are fluctuated at specific conditions while it is continuous steady injection. As the fuel temperature changes continuously, spray cone angle varies discontinuously through the region of injection instability.

• 한국분무공학회지
• /
• 제5권2호
• /
• pp.43-52
• /
• 2000

Numerical simulation of steady, non-evaporating hollow-cone sprays interacting with concentric annular air jets is performed using the discrete stochastic particle method in KIVA. The spray characteristics such as SMD, mean droplet velocity, liquid volume flux, air/liquid mass ratio, and droplet number density arc obtained and compared with the measurements involving different air flow rates in large and small annuli. Overall satisfactory agreement is achieved between calculation and experiment except for the deviation in the downstream SMD arising from uncertainty in the size distribution function at injection, and inaccuracy in the averaged spray parameters due to the small volumes of axisymmetric 2-D sector meshes close to the axis.

• 대한기계학회논문집A
• /
• 제30권10호
• /
• pp.1202-1208
• /
• 2006

This paper presents an experimental characteristics of electro-hydraulic proportional pressure control valve. In this study, poppet and valve body which are assembled into the proportional solenoid were designed and manufactured. The constant force characteristics of proportional solenoid actuator in the control region should be independent of the plunger position in order to be used to control the valve position in the fluid flow control system. The stroke-force characteristics of the proportional solenoid actuator is determined by the shape (or parameters) of the control cone. In this paper, steady state and transient characteristics of the solenoid actuator for electro-hydraulic proportional valve are analyzed using finite element method and it is confirmed that the proportional solenoid actuator has a constant attraction force in the control region independently on the stroke position. The effects of the parameters such as control cone length, thickness and taper length are also discussed.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2005년도 춘계학술발표회
• /
• pp.1283-1284
• /
• 2005

• 대한기계학회논문집B
• /
• 제26권4호
• /
• pp.604-613
• /
• 2002

Generation characteristics of electrospray droplets for highly viscous liquid have been investigated by measuring size distributions of droplets emitted from the Taylor cone using glycerol solutions with various conductivities. Because of very small volatility of glycerol, droplet sizes can be measured by an aerodynamic size spectrometer (TSI Aerosizer DSP) with negligible evaporation of droplets. For highly conducting and viscous liquid, the sizes of the droplets electrosprayed from the Taylor cone are found to be relatively insensitive to applied voltages and the electrosprays assisted by the corona discharge call produce monodisperse droplets as long as the corona intensity is not too high. Near the minimum flow rate where a liquid cone is stable, the spray tends to consist of a one -peak monodisperse distribution of drop lets. However, at high flow rates, the spray bifurcates into bimodal distributions, which are consistent with the result of the previous study for less viscous liquids than our liquids. For liquid flow rates (Q) below 1 nl/s, the measured droplet diameters by the aerosizer are in the range of 0.30 to 1.2 ${\mu}{\textrm}{m}$ for the glycerol solutions. The diameters of monodisperse droplets scale approximately with $r^*=Q_$\tau$(Q$\tau$){^1/3}$ where $r^*$ is a characteristic length and $\tau$is the electrical relaxation time of the fluid. However, when compared with several represe ntative scaling laws, the droplet diameters are two to six factors greater than those predicted by the scaling laws. This may be closely related to the combined effect of the much higher viscosity and the electrical charge on the jet breakup of glycerol so solution.

• 대한기계학회논문집B
• /
• 제37권2호
• /
• pp.161-170
• /
• 2013

Double cone 버너를 장착한 스월 예혼합 연소기에 대한 유동 및 연소 특성을 분석하여 swirler 모델을 이용한 수치적 모델링 방법을 제시하였다. 버너 출구에서 형성되는 내부 재순환 영역을 근사적으로 구현하도록 swiler의 내 외경을 각각 56 mm, 152 mm로 결정하였으며 이를 토대로 유량, 반경 반향 속도를 결정하였다. 접선 방향 속도의 설정을 위해 swirl 각도와 재순환 각도를 도입하였으며 40 m/s인 경우 유사한 내부 재순환 영역이 형성되었다. 라이너 출구에서 온도와 속도의 오차는 각각 2.8%, 0%로 작았지만, NOx의 경우 67% 가량 감소한 결과를 보였다. Swirler 모델은 EV 버너의 유동 및 연소 특성을 근사적으로 모사하는 모델의 하나로서 정량적 평가 인자에서 오차를 보이지만, 유동 및 화염, NOx 형성 영역의 경향성이 유사하므로 swirler 모델을 채택하여 복잡한 형상의 발전용 가스터빈 연소기의 효율적인 수치해석이 타당할 것으로 판단된다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.892-895
• /
• 2017

대형 가스터빈 연소기 구성품인 단일 압력선회식 연료분사기(Pressure swirl simplex liquid injector)를 설계, 분무특성 및 성능을 시험을 통해 평가하였다. 공급 압력 대비 분무 유량을 측정하여 설계점 기준 분무유량과 비교하였으며 섀도우그래프(Shadowgraph)를 통해 분무가시화이미지를 기록, 분무의 형상을 정성적으로 파악하고 분무각을 측정하였다. 시험 결과 동일한 공급압력 대비 측정된 분무유량은 설계점 기준 유량과 거의 일치하여 설계 및 제작의 정합성이 확인되었으며 섀도우그래프 이미지를 통해 연료분사기의 분무형상을 파악하고 설계 의도된 분무각이 나타남을 확인할 수 있었다. 이를 기반으로 향후 PDA(Phase Doppler Anemometry)를 통한 분무측정을 통해 보다 구체적인 연료 분사기의 분무 성능 및 특성을 파악할 수 있을 것으로 기대된다.