• Journal of Mechanical Science and Technology
• /
• 제18권11호
• /
• pp.2032-2041
• /
• 2004

Results from an experimental study of flow distribution in a close-coupled catalytic converter(CCC) are presented. The experiments were carried out with a flow measurement system specially designed for this study under steady and transient flow conditions. A pitot tube was a tool for measuring flow distribution at the exit of the first monolith. The flow distribution of the CCC was also measured by LDV system and flow visualization. Results from numerical analysis are also presented. Experimental results showed that the flow uniformity index decreases as flow Reynolds number increases. In steady flow conditions, the flow through each exhaust pipe made some flow concentrations on a specific region of the CCC inlet. The transient test results showed that the flow through each exhaust pipe in the engine firing order, interacted with each other to ensure that the flow distribution was uniform. The results of numerical analysis were qualitatively accepted with experimental results. They supported and helped explain the flow in the entry region of CCC.

• 대한기계학회논문집B
• /
• 제27권7호
• /
• pp.837-844
• /
• 2003

The exhaust gas flow in the inlet collector of close coupled catalyst(CCC) adapted to the exhaust manifold is very complex flow because the exhaust gas is a pulsation flow with several port flow. The distribution of gas flow and temperature in inlet collector effect to the efficiency of catalytic converter. In this study, it measures temperatures on several point in inlet collector with two kind of inlet collector volume. And it analyzes with CFD to exhaust manifold and close coupled catalyst for temperature and flow. Comparing to measured and analyzed result, it find increasing of collector volume effects to catalyst temperature distribution and uniformity of catalytic converter

• 대한기계학회논문집B
• /
• 제25권4호
• /
• pp.533-539
• /
• 2001

In this study, results from an experimental and numerical study of flow distribution in a close-coupled catalytic converter (CCC) are presented. The experiments were carried out using a glow measurement system. Flow distribution at the exit of the first monolith in the CCC was measured using a pitot tube under steady and transient flow conditions. Numerical analysis was done using a CF D code at the same test conditions, and the results were compared with the experimental results. Experimental results showed that the uniformity index of exhaust gas velocity decreases as Reynolds number increases. Under the steady flow conditions, flow through each exhaust pipe concentrates on a small region of the monolith. Under the transient flow conditions, flow through each exhaust pipe with the engine firing order interacts with each other to spread the flow over the monolith face. The numerical analysis results support the experimental results, and help explain the flow pattern in the entry region of the CCC.

• 대한기계학회논문집B
• /
• 제27권1호
• /
• pp.84-94
• /
• 2003

It is known that tip clearance flows reduce the pressure rise, flow range and efficiency of the turbomachinery. So, the clear understanding about flow fields in the tip region is needed to efficiently design the turbomachinery. The Navier-Stokes code with the proper treatment of the boundary conditions has been developed to analyze the three-dimensional steady viscous flow fields in the transonic rotating blades and a numerical study has been conducted to investigate the detail flow physics in the tip region of transonic rotor, NASA Rotor 67. The computational results in the tip region of transonic rotors show the leakage vortices, leakage flow from pressure side to suction side and their interaction with a shock. Depen ding on the operating conditions, toad distributions and the position of shock-wave on the blade surface are very different close to the blade tip of the transonic compressor rotor. The load distribution and the shock-wave position close to the blade tip had the close relationship with the starting position of leakage vortex and the direction of leakage flow.

• 한국조경학회지
• /
• 제28권1호
• /
• pp.83-91
• /
• 2000

This study was carried out to develop the close-to nature construction technology for the stream which has been improved just for the flood control with artificially straightened and concrete covered, losing the various functions of the stream such as wild-life habitat, polluted water purification and waterscape. Jungpyung stream in youngin City, Kyunggi Province was selected as a case study site. The results were as follows; 1. Existing stream improvement planning could accept the close-to-nature techniques of the low-flow revetment, keeping the capability of flood control and water use. 2. The low-flow revetment was planned and executed to the bottom of the stream without damaging the existing bank, and the slope of the low-flow revetment was adjusted as 1:1.2∼1.5. Consequently it would not disturb the water flow when the flood occurred and it would keep the constant water flow even at the drought with providing a stable ecosystem and water purification. 3. Low-flow revetement was planted with Salix species and perennials naturally, and it would be a precious biotope for the diverse floras and faunas. 4. Some furnitures such as stepping stone bridge, wooden bridge and step were installed to the suitable locations for the convenience of users, and it will be ot only the sound stream environment but also easy access to the waterscape. 5. This case study site will be monitored for 3 years systematically after the construction was finished in September, 1999 to get the exact results for the scientific approvement

• International Journal of Fluid Machinery and Systems
• /
• 제5권1호
• /
• pp.18-29
• /
• 2012

This paper deals with the CFD analysis of cavitating flow in the mixed-flow pump with the specific speed of 1.64 which suffers from a high level of noise and vibrations close to the optimal flow coefficient. The ANSYS CFX package has been used to solve URANS equations together with the Rayleigh-Plesset model and the SST-SAS turbulence model has been employed to capture highly unsteady phenomena inside the pump. The CFD analysis has provided a good picture of the cavitation structures inside the pump and their dynamics for a wide range of flow coefficients and NPSH values. Cavitation instabilities were detected at 70% of the optimal flow coefficient close to the NPSH3 value (NPSH3 is the net positive suction head required for the 3% drop of the total head of the pump).

• 디지털콘텐츠학회 논문지
• /
• 제15권1호
• /
• pp.53-60
• /
• 2014

영화든 애니메이션이든 영상의 프레임에 담긴 쇼트들은 상당히 가변적이지만 클로즈업은 피사체에서 보여 지는 의미들을 부각시킨다. 영화에서의 클로즈업은 배우의 연기가 중요한 영향을 미치는 반면 애니메이션은 감독 및 애니메이터가 창조한 캐릭터의 연기를 대신하고 있어 클로즈업에 대한 이해가 우선되어야 한다. 이 연구는 애니메이션 내러티브에서 특별한 의미로 기능하는 클로즈업의 연출적 효과들을 극장용 애니메이션을 중심으로 고찰하였다. 클로즈업의 다양한 연출 효과들 중에서도 내러티브의 자연스러운 흐름과 관객의 감정이입으로 몰입을 유도하는 연출 효과를 중심으로 하였다. 내러티브의 자연스러운 흐름을 유도하는 연출 효과로 서술적 클로즈업을 분석하였으며, 캐릭터의 내면적 심리를 효과적으로 전달하여 관객의 감정이입을 유도하는 연출 효과로 심리적 클로즈업을 분석하였다. 마지막으로 극적인 효과를 창출하여 극의 몰입을 유도하는 상징적 클로즈업을 분석하여 애니메이션에서의 클로즈업 연출이 내러티브 전개의 완성도를 높이는데 기여할 수 있을 것으로 기대한다.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.477-478
• /
• 2006

Close-coupled atomizers are of great interest and controlling their performance parameters is critical for metal powder producing and spray forming industries. In this study, designed close-coupled nozzle systems were used to investigate the effect of the nozzle types and protrusion length of the melt delivery tube on the pressure formation at the melt delivery tube tip. The observed metal flow rate was not behaving as what was earlier assumed, namely that, deeper aspiration enhanced metal flow rate. Higher aspiration pressure at the tip of the melt delivery tube increases the stability of atomization process.

• 대한기계학회논문집A
• /
• 제28권3호
• /
• pp.318-324
• /
• 2004

The stability of a simply supported straight pipe is investigated. The time dependent flow is assumed to vary harmonically about a constant mean velocity. Stability conditions and dynamic reponses of a governing equation are conducted by use of multiple scale mettled. Parametric resonances and combination resonances are investigated. Stability boundaries are analytically determined. The resulted stability conditions show that instabilities exist when the frequency of flow fluctuation is close to two times the natural frequency or to the sum of any two natural frequencies. In case that the fluctuated flow frequency is close to zero or to the difference of two natural frequencies, however, instabilities are not found up to the first order of perturbation. Stability charts are numerically Presented fir the first two vibration modes.

• 대한기계학회논문집A
• /
• 제30권12호
• /
• pp.1588-1595
• /
• 2006

The stabilities of a pinned-pinned straight pipe conveying fluid are investigated by complexification-averaging method. The flow is assumed to vary harmonically about a constant mean velocity. Instability conditions of a governing equation are analytically obtained about parametric primary, secondary and combination resonances. The resulted stability conditions show that instabilities exist when the frequency of flow fluctuation is close to one and two times the natural frequency or to the sum of any two natural frequencies. In case that the fluctuated flow frequency is close to the difference of two natural frequencies, instabilities does not exist.