• The Journal of Asian Finance, Economics and Business
• /
• 제7권8호
• /
• pp.87-94
• /
• 2020

The paper aims to investigate the impact of presenting statements of cash flow using the direct method and the indirect method on loan decision by credit officers at Vietnamese banks. The data was collected from 150 credit officers of commercial banks in Vietnam based on the questionnaire about making loan decision when the cash flow statement is presented in different methods, namely, direct and indirect methods. This research uses T-tests to check whether using the direct or indirect method affects the accurate calculation of loan criteria, affects the loan decision by credit officers, and compare these two methods in the aspects of information provision. The research has pointed out that: 1) the direct method helps the calculation of indicators related to loans more accurately; 2) credit officers say that, while the direct method of presenting cash flow statement provides clearer information, the use of either the direct method or the indirect method does not affect the banks' loan decision. Since then, the author recommends that cash flow statements should be provided with information in a direct method to present the information needed for loan decision more accurately so as to improve the quality of cash flow statement.

• 대한기계학회논문집B
• /
• 제30권5호
• /
• pp.438-445
• /
• 2006

We performed the simulation of the unsteady three dimensional flow over a square cylinder in a wind tunnel in moderate Reynolds number range, $100{\sim}2500$ by using LBM. SGS model was applied for the turbulent flow. Frist of all we compared LBM(Lattice Boltzmann Method) solution of Poiseuille flow applied Farout and bounce back boundary conditions with the analytical and FOAM solutions to verify the applicability of the boundary conditions. For LBM simulation the calculation domain was formed by structured grids and prescribed uniform velocity and density inlet and Farout boundary conditions were imposed on the in-out boundaries. Bounceback and wind tunnel boundary conditions were applied to the cylinder walls and the boundaries of calculation domain respectively. The maximum Strouhal number of the vortex shedding is 0.2025 at Re = 750. and the number maintains the constant value of 0.18 when Re>1000. We also predicted that the critical reynolds number of the turbulent flow is in the range of $250{\sim}500$.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회(1)
• /
• pp.86-87
• /
• 2005

• 유변학
• /
• 제10권4호
• /
• pp.202-216
• /
• 1998

기존의 'Orthotropic' 근사모델의 개선된 형태인 ORW를 새로운 유동 자료를 이용하여 수치적으로 구하였다. 기존의 'Orthotropic' 근사모델인 ORF나 ORL은 특히 전단유동 하에서 상호작용상수 $C_1$<0.001인 경우 비물리적 진동특성을 나타낸다. 물론 center-gated disk와 같은 비균일 유동하에서도 비물리적 진동특성을 나타내고 'Distribution Function Calculation'과 비교하여 배향 상태를 낮게 예측한다. 이런 현상들은 바로 least-square 최적화 시 사용된 유동 자료에 기인한 것을 알 수 있었다. 작은 상호작용계수의 균일 유동 자료를 이용하여 최적화를 한 ORW의 경우 비물리적 진동특성도 나타나지 않았고 균일 및 비균일 유동하에서 모두 정성적으로 잘 일치함을 확인할 수 있었다. 최적화 시 사용된 함수의 선택은 근사모델을 발전시키는데 그다지 영향을 미치지 못하였다. 하지만, 모든 배향 텐서의 eigenvalue들을 고려하면 보다 정량적으로 발전시킬 수 있지만 이들의 함수모양 선택은 중요하고 어려운 문제다. 비교를 위하여 ORW와 다른 여러 가지 근사모델을 이용하여 Film-gated strip과 Center-gated disk에 대한 연계효과 및 평면속도구배를 포함한 사출성형 충전공정의 수치모사를 수행하였다. ORW가 'Distribution Function Calculation' 과 비교하여 정량적으로도 거의 비슷한 결과를 예측함을 보여주지만 실제 실험자료와 비교하였을 때 약간의 차이가 있음을 확인하였다. 따라서 좀 더 정확히 섬유의 배향도를 예측하기 위해서는 섬유들의 상호작용을 나타내는 항의 모델링의 변화가 요구된다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1054-1061
• /
• 2009

본 연구에서는 현재 국내외적으로 설치가 이루어지고 있는 PSD에 대하여 설치 유무에 따른 화재유동 변화와 배연효율변화에 중점을 두어 연구를 진행하였다. 시뮬레이션 모델은 대구지하철 중양로 역사이며, 승강장과, 대합실 2개층을 포함하여 화재해석을 수행하였고, 화재해석 프로그램은 FDS를 사용하였다. 역사 전체를 모델링함에 따른 격자수 증가로 많은 계산시간이 소요되므로 병렬처리 기법을 통한 화재해석을 수행하였다. PSD 유무에 따른 화재유동 및 배연효율 변화의 비교를 위하여 화재사나리오를 작성하여 Case 별로 화재해석을 수행하였다. 화재규모는 NFPA-130 을 참조하여 10Mw 상황에서의 화재유동 을 연구하였다. 해석 결과는 NFPA-130을 참고하여 승객안전에 중점을 두어 분석하였다.

• 전기학회논문지
• /
• 제65권1호
• /
• pp.9-15
• /
• 2016

Distribution networks are operated in radial fashion during the normal state. Loop configuration is also required temporally in case of live load transfer among the adjacent feeders. Voltage angles of each substation buses are very important data in order to calculate power flow of the loop structured distribution feeders. This paper proposes substation bus voltage angle calculation method using voltage angle difference measured at the normally open tie switches. Simulation case studies using Matlab simulink have been performed to establish feasibility of proposed method.

• Nuclear Engineering and Technology
• /
• 제44권8호
• /
• pp.831-846
• /
• 2012

KAERI has developed a two-phase CFD code, CUPID, for a refined calculation of transient two-phase flows related to nuclear reactor thermal hydraulics, and its numerical models have been verified in previous studies. In this paper, the CUPID code is validated against experiments on the downcomer boiling and moderator flow in a Calandria vessel. Physical models relevant to the validation are discussed. Thereafter, multi-scale thermal hydraulic analyses using the CUPID code are introduced. At first, a component-scale calculation for the passive condensate cooling tank (PCCT) of the PASCAL experiment is linked to the CFD-scale calculation for local boiling heat transfer outside the heat exchanger tube. Next, the Rossendorf coolant mixing (ROCOM) test is analyzed by using the CUPID code, which is implicitly coupled with a system-scale code, MARS.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.43-46
• /
• 2007

To find out the optimum design of hydrogen storage and supply tank using Metal Hydride (briefly MH) and to make clear the performance characteristics under various conditions are our research purpose. In order to use the low-temperature exhaust heat, $LaNi_{4.7}Al_{0.3}$ which operates under the low pressure of 1MPa is chosen, and we measure the basic properties, namely density, specific heat, PCT(Pressure-Concentration-Temperature) characteristic, and effective thermal conductivity. Then, a numerical calculation model of hydrogen storage using MH alloy is suggested and this thermal diffusion equation of model is solved by the backward difference method. This calculation results rate compared with the experimental results of the systems which installed 1kg MH alloy and, it is found out that our calculation model can well predict the experimental results. By the experimental using MH alloy, it is recognized that the hydrogen flow rate can control by the step adjustment of brine temperature.

• Journal of Electrical Engineering and Technology
• /
• 제9권1호
• /
• pp.254-258
• /
• 2014

This paper presents the performance analysis results of a short line fault interruption of a gas circuit breaker, particularly a self-blast type breaker. Hot gas flow analysis was carried out using a CFD calculation combined with the arc model and nozzle ablation model. To evaluate the interruption performance, the index function was defined using the pressure in the heating chamber and the density above the arc region. The simulation and test results showed that the gas flow field and suitable choice of an interruption performance index can be used to predict the interruption characteristics and provide guidelines for designing self-blast breakers with a higher interruption capability.

• 대한조선학회논문집
• /
• 제41권2호
• /
• pp.61-69
• /
• 2004

In this study, flow around rudder is analyzed by utilizing the numerical calculation, and the rudder open water test is performed to validate the calculation. The aim of this study is to design the new rudder shape to improve manoeuvring performance. In first, flow around two-dimensional rudder section is analyzed to understand the characteristics of section profile. And the calculation for all-movable rudders is performed and compared with results of rudder open water test. It is hard to numerically predict the drag force because the value is sensitive to the turbulence modeling and grid spacing near the wall. However, the lift force is predicted well. And we can prove that concave profile of the rudder section produce more lift and torque than convex one as a experiment. However PANEL method that ignore viscous effect cannot distinguish the difference of them. So, we can look for the numerical tool to be developed the new rudder shape.