• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.560-564
• /
• 2004

The optimal design and combustion analysis of the gas generator for Liquid Rocket Engine (LRE) were performed. A fuel-rich gas generator in open cycle turbopump system was designed for 10ton$_{f}$ in thrust with RP-1/Lox propellant. The optimal design was done for maximizing specific impulse of main combustion chamber with constraints of combustion temperature and power matching required by turbopump system. Design variables were selected as total mass flow rate to gas generator, O/F ratio in gas generator, turbine injection angle, partial admission ratio, and turbine rotational speed. Results of optimal design show the dimension of length, diameter, and contraction ratio of gas generator. Also, the combustion test was conducted to evaluate the performance of injector and combustion chamber. And the effect of the turbulence ring was investigated on the mixing enhancement in the chamber.r.

• Journal of Ginseng Research
• /
• 제18권3호
• /
• pp.151-159
• /
• 1994

To evaluate the anticarcinogenic effect and its mechanism of red ginseng, the mice were treated with red ginseng and received subcutaneous Bl6 melanoma cell line injection on the back. Tumor incidence was same (100%) both in water and red ginseng-treated groups, but tumor production was delayed in red ginseng-treated group. Survival time was somewhat longer in red ginseng-treated group. The histopathological findings were similar in both groups, but lymphocytic infiltration around the tumor and melanin production in the tumor cells were prominent in the red ginseng-treated group. Flow cytometric analysis on T lymphocytes and natural killer cells revealed increased $T_H$/$T_S$ ratio and increased NK cells in red ginseng-treated group. These results suggest that the anticarcinogenic effect of red ginseng may be exerted by the increased cell-mediated immunity and natural killer cell activity.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2004년도 추계학술대회
• /
• pp.87-89
• /
• 2004

정밀화와 더불어 고품질화 되고 있는 사출성형 산업에서 CAE기술(Computer Aided Engineering)은 성형 시행오차를 줄여 원가를 절감하고, 생산성을 향상시킬 수 있는 최적의 대안이라 할 수 있다. 본 연구는 이러한 CAE 기술을 활용하여 현장에서 사출성형하기 힘든, 두께 0.3mm인 소형 RC비행기 Battery Case제품을 대상으로 유동해석을 통해 최적 Gate와 유동기구의 설계 조건을 도출하고 구현하고자 하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.1075-1077
• /
• 2003

본 논문에서는 직렬주입변압기가 없는 다중브리지 형태의 새로운 UPFC를 제안하고 그 특성을 분석한 내용에 대해 기술하고 있다. 송전계통에 적용 가능한 UPFC의 새로운 토폴로지를 제안하고 상세모델을 통하여 계통의 전력조류제어 및 파도상태시의 동특성을 시뮬레이션 한다. 1기무한모선 전력계통인 138kV 송전선로에 UPFC가 연결되어 있는 것으로 가정하여 제안하는 시스템의 동특성을 EMTDC 시뮬레이션으로 분석하였다. 제안하는 시스템은 직렬주입변압기가 없이 직접 선로에 연결하는 것이 가능하다. H-브리지 인버터의 수를 증가시킴으로써 동작전압을 유연하게 높일 수 있다.

• 한국표면공학회지
• /
• 제29권2호
• /
• pp.132-139
• /
• 1996

Experiments on the automatic control of NaOH concentration and on the spraying condition of NaOH solution in the alkaline degreasing process of a continuous hot-dip galvanizing line have been carried out in order to improve degreasing performance of a galvanizing sheet steel using laboratory degreasing and galvanizing simulators. The concentration of NaOH for the good degreasing has been determined to be 6.0% and more and this concentration has been able to be automatically well controlled within $\pm$0.1% by employing a solution electrical conductivity meter under a flow injection analysis condition rather than by employing a sodium ion selective electrode in the degreasing simulator. Frequent blocking of the spraying nozzles of the solution has been reduced considerably by the set-up and periodical operation of an automatic valve system in the nozzle system. By applying this automatic valve system and by automatic controlling the NaOH concentration and other ordinary variables in the degreasing process, the degreasing performance has been increased from the conventional 76% to the new 85%.

• 전기학회논문지P
• /
• 제53권3호
• /
• pp.116-121
• /
• 2004

This paper proposes a novel UPFC based on 3-level Half-bridge modules, isolated through single-phase multi-winding transformers. The dynamic performance of proposed system was analyzed by simulation with EMTDC, assuming that the UPFC is connected with the 138-kV transmission line of one-machine-infinite-bus power system. The proposed system can be directly connected to the transmission line without series injection transformers. It has flexibility in expanding the operation voltage by increasing the number of 3-level Half-bridge modules.

• Nuclear Engineering and Technology
• /
• 제50권8호
• /
• pp.1412-1420
• /
• 2018

An experiment was performed using the large-scale test facility (LSTF), which simulated a 1% vessel upper head small-break loss-of-coolant accident with an accident management (AM) measure under an assumption of total-failure of high-pressure injection (HPI) system in a pressurized water reactor (PWR). In the LSTF test, liquid level in the upper head affected break flow rate. Coolant was manually injected from the HPI system into cold legs as the AM measure when the maximum core exit temperature reached 623 K. The cladding surface temperature largely increased due to late and slow response of the core exit thermocouples. The AM measure was confirmed to be effective for the core cooling. The RELAP5/MOD3.3 code indicated insufficient prediction of primary coolant distribution. The author conducted uncertainty analysis for the LSTF test employing created phenomena identification and ranking table for each component. The author clarified that peak cladding temperature was largely dependent on the combination of multiple uncertain parameters within the defined uncertain ranges.

• 한국전기전자재료학회논문지
• /
• 제26권5호
• /
• pp.401-409
• /
• 2013

Numerical analysis on RF (Radio-Frequency) thermal plasma treatment of micro-sized Ni metal was carried out to understand the synthesis mechanism of nano-sized Ni powder by RF thermal plasma. For this purpose, the behaviors of Ni metal particles injected into RF plasma torch were investigated according to their diameters ($1{\sim}100{\mu}m$), RF input power (6 ~ 12 kW) and the flow rates of carrier gases (2 and 5 slpm). From the numerical results, it is predicted firstly that the velocities of carrier gases need to be minimized because the strong injection of carrier gas can cool down the central column of RF thermal plasma significantly, which is used as a main path for RF thermal plasma treatment of micro-sized Ni metal. In addition, the residence time of the injected particles in the high temperature region of RF thermal plasma is found to be also reduced in proportion to the flow rate of the carrier gas In spite of these effects of carrier gas velocities, however, calculation results show that a Ni metal particle even with the diameter of $100{\mu}m$ can be completely evaporated at relatively low power level of 10 kW during its flight of RF thermal plasma torch (< 10 ms) due to the relatively low melting point and high thermal conductivity. Based on these observations, nano-sized Ni metal powders are expected to be produced efficiently by a simple treatment of micro-sized Ni metal using RF thermal plasmas.

• 대한수의학회지
• /
• 제32권4호
• /
• pp.649-661
• /
• 1992

This study was performed to compare DNA content by flow cytometer (FCM) and glutathione S-transferase placental form (GST-P) positive foci for searching objective and accurated properties of tumor. Sprague-Dawley rats aged six weeks were divided into three groups and group 1 and 2 of rats were given an intraperitoneal injection of diethylnitrosamine at 200mg/kg body weight and group 3 of rats were given saline. Three weeks after beginning of the experiment, all groups were performed partial hepatectomy. Group 1 of rats were begun to feed on diets containing 0.02% 2-acetylaminofluorene as a promoter for six weeks, group 2 and 3 of rats were begun to feed on basal diets. At 4, 6, and 8 weeks after initiation, all groups of rats were killed, livers were extracted for H & E stain, immunohistochemical stain, and DNA ploidy analysis. In quantitative analysis for GST-P positive lesion number and area by using Image Analyzer, group 1 and 2 represented significant difference in comparison with group 3. In ploidy distribution, diploid cells of group 1 and 2 were increased significantly in comparison with those of group 3 at 4, 6, and 8 weeks after initiation, respectively tetraploid cells were reduced. But S-phase cells were not changed significantly. It is concluded that ploidy change by FCM is useful as objective data for early detection in hepatocarcinogenesis. Therefore, methodology and study of DNA content are carried out for more objective and accurate ploidy analysis in liver tumor.

• 분석과학
• /
• 제30권3호
• /
• pp.122-129
• /
• 2017

Methamphetamine addiction is a critical issue due to the lack of effective pharmacotherapy and high potential for relapse. Nevertheless, there are no distinct biomarkers for diagnosis or prognosis for methamphetamine addiction. In the present study, a rat model for methamphetamine self-administration was established and alteration of urinary metabolites by methamphetamine addiction was investigated by the targeted metabolite analysis using mass spectrometry. Rat urine samples were collected at three time points (before and after addiction and after extinction) from the methamphetamine-addicted group as well as the age-matched control group. The collected samples were prepared using AbsoluteIDQ p180 kit and analyzed using flow injection analysis (FIA) - or high performance liquid chromatography (HPLC) - tandem mass spectrometry (MS/MS). The levels of lysine, acetylornithine and methioninesulfoxide were distinctively altered depending on the status of metheamphetamine addiction or extinction. In particular, the level of acetylornithine was reversely changed from addiction to extinction, for which further studies could be useful for biomarker discovery or mechanistic studies for methamphetamine addiction.