• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 1999년도 Proceedings of Pre-symposium of the 10th ISWPC
• /
• pp.164-171
• /
• 1999

A new technique for recycling process water was developed in order to reduce the calcium hardness of the closed OCC recycling system. Calcium ions present in the white water were precipitated as calcium carbonate by a reaction with sodium carbonate and the CaCO$_3$precipitates were easily removed from the system by a dissolved air flotation(DAF) method. After the DAF stage, CO$_2$-gas was purged into the water because the pH of Na$_2$CO$_3$-treated white water was reduced to neutral by CO$_2$gas. Since CaCO$_3$precipitate tends to stick onto the fine fiber surface and then is selectively removed from the water, a proper amount of suspended solid in the process water acts as an important factor in deciding the removal efficiency. By the application of Na$_2$CO$_3$addition - DAF - CO$_2$purging to the short circulated white water the calcium hardness was significantly reduced by 92% and more. The removal of calcium ions with fine fibers led to drainage improvement, reduction of fresh water consumption, and enhanced efficiency of wet-end chemicals.

• 한국군사과학기술학회지
• /
• 제26권2호
• /
• pp.159-170
• /
• 2023

In the present study, the dynamic behavior characteristics of an amphibious assault vehicle during water entry were analyzed using STAR-CCM+, a commercial computational fluid dynamics(CFD) code. All computations were performed using an overset mesh system and a RANS based flow-solver coupled with dynamic fluid-body interaction(DFBI) solver for simulating three degrees of freedom motion. For numerical validation of the solver, a water entry simulation of inclined circular cylinder was conducted and it was compared between an existing experiment data and CFD results. The pitch angle variation and the trajectory of the circular cylinder during water entry shows good agreement with previous experimental and numerical studies. For the water entry simulations of the amphibious assault vehicle, the analysis of dynamic behaviors of the amphibious assault vehicle with different slope angles, submerged depths and initial velocities were conducted. It is confirmed that the steep slope angle increases the submerged volume of the amphibious assault vehicle, so the buoyancy acting on the vehicle is increased and the moved distance for the re-flotation is decreased. It is also revealed that the submerged volume is increased, bow-up phenomenon occur earlier.

• 펄프종이기술
• /
• 제32권1호
• /
• pp.48-56
• /
• 2000

The objective of this study was to investigate the enzymatic deinking technology. Office recycled papers such as computer printed out(CPO) and white ledger(WL) were used in the evaluation of four different deinking conditions ; alkaline deinking , neutral deinking and enzymatic deinking at alkaline and neutral pH. Filltering pads were prepared after flotation deinking to measure brighteness gain and ink removal efficiency. Three different surfactants were also used in the evaluation of deinking efficiency including surface chemical properties by measuring foam height and stability, surface tension and cloud point of views. The results indicated that the neutral deinking method with enzyme and surfactant addition showed highest deinking efficiency of office recycled papers.

• 대한기계학회논문집B
• /
• 제30권10호
• /
• pp.982-986
• /
• 2006

It is well known that the surface tension forces can make a particle denser than water float when the size of the particle is of the order of 1 mm. This is deeply related to the basic mechanism enabling small insects to wander around on the pond surface and also to a newly emerging technology of self-assembly using capillary forces. For the quantitative understanding of this effect, we experimentally study the maximum density of a cylinder that can float on water and how fast the cylinder sinks when the density exceeds the maximum value. We compare our experimental results with the theoretical prediction and find good agreement between them.

• Environmental Engineering Research
• /
• 제24권2호
• /
• pp.191-201
• /
• 2019

Petroleum industry produces one of the popular hazardous waste known as Petroleum Sludge. The treatment and disposal of petroleum sludge has created a major challenge in recent years. This review provides insights into various approaches involved in the treatment, and disposal of petroleum sludge. Various methods used in the treatment and disposal of petroleum sludge such as incineration, stabilization/solidification, oxidation, and bio-degradation are explained fully and other techniques utilized in oil recovery from petroleum sludge such as solvent extraction, centrifugation, surfactant EOR, freeze/thaw, pyrolysis, microwave irradiation, electro-kinetic method, ultrasonic irradiation and froth flotation were discussed. The pros and cons of these methods were critically considered and a recommendation for economically useful alternatives to disposal of this unfriendly material was presented.

• 청정기술
• /
• 제25권3호
• /
• pp.179-188
• /
• 2019

석탄화력 발전시 석탄은 석탄회로 발생하게 되는데 비회(fly ash)가 80%, 저회(bottom ash)가 20% 비율로 발생된다. 그러나 이들 대부분은 재활용되지 못하고 매립장에 전량 폐기되고 있고, 비회 및 저희를 매립하는 매립장이 포화될 경우 새로운 대체 매립장을 건설하지 못하는 한 석탄화력발전소의 운영을 중지해야 하는 경우가 발생할 수 있다. 본 연구에서는 비회를 재활용하여 자원화하기 위해 습식 부유선별기술(부선과정)을 이용하여 비회 내 유용성분{미연탄소(unburned carbon, UC), 뮬라이트(ceramic microsphere, CM), 실리카(cleaned ash, CA)}을 회수하였으며, 회수된 유용성분들의 특성분석으로 산업 소재로 재활용 가능성을 조사하였다. 비회로부터 회수된 유용성분의 회수율은 UC 92.10%, CM 75.75%, CA 69.71%로 부선과정을 통하여 UC가 다른 성분보다 회수율이 16 ~ 22% 더 우수한 것으로 나타났다. UC의 연소가능성분(combustible component, CC)은 52.54wt%, 발열량도 $4,232kcal\;kg^{-1}$로 높아서 석탄 기준 C의 함량 100%일 경우 $8,100kcal\;kg^{-1}$로 감안할 때 산업용 연료로 사용이 가능할 것으로 사료된다. CM과 CA의 분리는 pH의 영향으로 UC 보다는 화학적 분리가 효과적이었으며, 회수된 CA의 $SiO_2$ 함량은 78.66wt%, CM의 $SiO_2$ 함량은 53.55wt%로 나타나 산업용 소재로 재활용 가능성을 확인할 수 있었다.

• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 2005년도 추계정기총회 및 제26회 학술발표대회 고분자리싸이클링기술 특별심포지엄
• /
• pp.173-177
• /
• 2005

리튬이온 2차전지(Lithium ion battery, LIB)는 기존에 사용되던 전지에 비해 에너지 밀도가 높고 충방전 사이클이 우수하다. 이 때문에 휴대전화와 노트북 등에 수요가 급속하게 증가하고 있으며 1995년 LIB의 생산량은 4천만 개에서 2004년에는 약 8억 개로 20배 이상 증가하였다. 이에 따라 폐LIB도 급속하게 증가하게 되어 전국적인 재활용 시스템의 확보가 필요한 실정이다. 본 연구에서는 폐LIB에 함유되어 있는 유가금속 중에서 리튬코발트옥사이드(이하 $LiCoO_2$)를 회수하기 위하여 분쇄기(orient vertical cutting mill)와 진동 Screen을 사용하여 유기분리막, 금속류(Aluminium foil, Copper foil, case 등) 그리고 전극물질(lithium cobalt oxide와 graphite 등의 혼합 분말)로 분리하였다. 전극물질에서 $LiCoO_2$와 graphite 분리를 위한 전처리 단계로서 $500^{\circ}C$ 정도의 열처리를 하여 $LiCoO_2$의 표면 성질을 변화시켜 부유선별에 의해 $LiCoO_2$와 graphite의 분리가 가능하도록 하였다. 부유선별 실험 결과 93% 이상의 순도를 가지는 $LiCoO_2$를 92% 이상 회수할 수 있었다.

• 산업기술연구
• /
• 제7권
• /
• pp.27-47
• /
• 1987

Fine anthracite is very difficult to upgrade by conventional processes such as gravity concentration or froth flotation, because large quantities of fine coals are generated at the mining and preparation stages and a significant portion of these fine coals are mixed with gangue minerals. This study, therefore, was carried out for the purpose of improving recovery of low ash clean coal, effective beneficiation of low-grade coking coal and removal of sulphur from high-sulphur coals by employing the method of selective agglomeration using oil or polystrene flocculants, for coals which are generally hydrophobic in nature will be extracted by using flocculants. Studies were performed by varying solid concentration, concetration of bridging liquid, mixing speed and mixing time, balling speed and balling time, dispersant dosage, flocculant dosage, pulp pH, and particle size. The results were : when the methods of the oil agglomeration and selective flocculation were employ(in the two process the sample was ground to the size of -74 micron), 1) ash content of the agglomerated coal was 9.85, 7.83%, 2) combustibel recovery of it was 98.5%, 93.5%, respectively. It was observed in selective flocculation that polystyrene is an effective flocculant for coal, De-entrapment of shale from the concentrate flocculated by mechanical agitation was necessary for substantional reductions in final ash content.

• 대한화학회지
• /
• 제35권4호
• /
• pp.355-361
• /
• 1991

수용액 시료 중 흔적량 수은[Hg(II)]을 공침-부선기술에 의하여 분리-농축하는 방법에 관하여 연구하였다. 물시료 1000ml에 0.1M Ce$^{3+}$ 용액 3.0 ml를 가하고, 1.0M NaOH 용액으로 pH를 11.0으로 되게 조절하여 Hg(II)를 Ce(OH)$_3$와 함께 공침시켰다. 0.1${\%}$ sodium oleate 용액 2.0 ml를 가하여 만든 소수성 침전을 질소기체로 bubbling하여 용액 표면으로 띄웠다. 뜬 침전을 감압 플라스크에 모으고 2.0M HNO$_3$ 5.0 ml 로 녹였다. 탈이온수로 용액을 묽혀 25.00 ml로 정확히 만들었다. Hg(II)의 함량을 냉증기-원자흡수 분광법으로 정량하였다. 정량과정에서 Ag$^+$, Br$^-$, I$^- $ 등의 간섭은 관찰되지 않았다. 고려대학교 서창캠퍼스의 폐수에서 Hg(II)의 분석결과는 1.98 ng/ml 이었고, 이 값에 대한 상대표준편차는 3.6${\%}$이었다. 또 이 폐수에 1.0과 2.0ng/ml의 Hg(II)를 첨가하여 분석한 회수율은 각각 95와 91${\%}$이었다. 이런 결과로부터 본 분석법이 물시료 중 흔적량 Hg(II)의 정량에 꽤 정확하고 재현성이 있음을 확인할 수 있었다.

• 상하수도학회지
• /
• 제34권6호
• /
• pp.393-402
• /
• 2020

In the membrane process, it is important to improve water treatment efficiency to ensure water quality and minimize membrane fouling. In this study, a pilot study of membrane process using reservoir water was conducted for a long time to secure high flux operation technology capable of responding to influent turbidity changes. The raw water and DAF(Dissolved Air Flotation) treated water were used for influent water of membrane to analyze the effect of water quality on the TMP (Trans Membrane Pressure) and to optimize the membrane operation. When the membrane flux were operated at 70 LMH and 80 LMH under stable water quality conditions with an inlet turbidity of 10 NTU or less, the TMP increase rates were 0.28 and 0.24 kPa/d, respectively, with minor difference. When the membrane with high flux of 80 LMH was operated for a long time under inlet turbidity of 10 NTU or more, the TMP increase rate showed the maximum of 43.5 kPa/d. However, when the CEB(Chemically Enhanced Backwash) cycle was changed from 7 to 1 day, it was confirmed that the TMP increase rate was stable to 0.23 kPa/d. As a result of applying pre-treatment process(DAF) on unstability water quality conditions, it was confirmed that the TMP rise rates differed by 0.17 and 0.64 kPa/d according to the optimization of the coagulant injection. When combined with coagulation pretreatment, it was thought that the balance with the membrane process was more important than the emphasis on efficiency of the pretreatment process. It was considered that stable TMP can be maintained by optimizing the cleaning conditions when the stable or unstable water quality even in the high flux operation on membrane process.