• The Korean Journal of Pesticide Science
• /
• v.18 no.3
• /
• pp.141-147
• /
• 2014

Fenpyroximate is acaricide of pyrazole group. This acaricide have already been permitted for herb cultivation. This experiment was conducted to establish a determination method for fenpyroximate residue in herbal medicines using HPLC-PDA and HPLC-MS/MS. Fenpyroximate residue was extracted with acetone from samples of herbal which Liquorice Root (Glycyrrhiza uralensis) and Safflower Seed (Carthamus tinctorius Linne). The extract was diluted with saturated saline water and dichloromethane liquid-liquid partition (extraction) was followed to recover fenpyroximate from the aqueous phase. Amino propyl ($NH_2$) and florisil column chromatography was additionally employed for final clean up of the extract. The fenpyroximate was quantitated by HPLC-PDA and HPLC-MS/MS. The herbals were fortified with fenpyroximate at 2 or 3 levels per crop. Mean recovery ratio were ranged from 72.0 to 106.4%. The coefficients of variation were ranged from 0.2 to 4.4. Therefore, this analytical method was reproducible and sensitive enough to determine the residue of fenpyroximate in herbal medicines.

• Journal of the Korean Chemical Society
• /
• v.39 no.12
• /
• pp.902-909
• /
• 1995

Detection limit as well as calibration curves on organophosphorus pesticide(dimethoate, diazinon, parathion-methyl, fenitrothion, malathion) and BHCs were measured for evaluation of utility on qualitative or quantitative analysis of pesticides with ion Trap mass spectrometer and quadrupole mass spectrometer. As ionization source, EI and CI were adopted for qualitative analysis of pesticides by comparison of each fragmentation pattern. At the same time, the utility as trace analysis techniques through scan or selected ion monitoring(SIM) mode was evaluated. With ion trap for all pesticides, detection limit(DL, 1 ${\mu}L$ injection) on scan mode was ranged 0.008∼0.225 ng at signal to noise ratio 3. With quadrupole DL on scan mode was ranged 0.23∼3.1 ng over 0.032∼0.68 ng on SIM mode. The calibration curve with ion trap generated good linearity over 0.99 as correlation coefficient. As clean up procedure, Bio Beads S-X3 was used for the separation of oils from five organophosphorous pesticides in flour extractant showing more than 80% as recovery at most cases. In case of BHCs in jinseng with Florisil column, the recovery of pesticides has been 60% to 90%.

• Korean Journal of Food Science and Technology
• /
• v.37 no.4
• /
• pp.537-541
• /
• 2005

Estimation of concentrations of PAHs [benzo(a)anthracene, chrysene, benzo(b)fluoranthene, benzo(k)fluoranthene, benzo(a)pyrene, dibenzo(a,h)anthracene, benzo(g,h,i)perylene, indeno(1,2,3-c,d)pyrene] in cereals, pulses, potatoes, and their products available in Korean markets gave mean levels of 0.13, 0.08, 0.06, 0.03, 0.08, 0.15, 0.45, and $0.14{\mu}g/kg$, respectively, with recoveries between 82.6-106.6%. Methodology involved saponification and extraction with n-hexane, purification on Sep-Pak Florisil cartridges, and high performance liquid chromatography using a fluorescence detector.

• Korean Journal of Food Science and Technology
• /
• v.37 no.2
• /
• pp.304-307
• /
• 2005

Multiresidue method was set up for the simultaneous determination of various residual pesticides in potatoes and carrots, which was analyzed by gas chromatography-electron capture detector/nitrogen phosphorus detector. Method consisted with acetone/acetonitrile (9 : 1) extraction and dichloromethane partition, followed by florisil cartridge purification with hexane/dichloromethane/acetonitrile (50 : 45 ; 5) elution. Among 197 pesticides (194 kinds) spiked to food materials, 143 and 155 pesticides were recovered over 70% on potatoes and carrots, respectively. Nineteen pesticides including bromacil, cyproconazole, were not detected in water and sample matrices. Matrix components may affect the low detections of 25 pesticides such as benfuracarb, bitertanol from potatoes and 16 pesticides such as bitertanol, carbosulfan from Carrots. Some pesticides including dichlobenil, fluoroimide and iprodione were highly detected from one or both matrices even though they were not detected from water.

• Korean Journal of Food Science and Technology
• /
• v.31 no.6
• /
• pp.1495-1502
• /
• 1999

Gamma-irradiated beef and chicken at the dose levels of 0.5 to 10 kGy were subjected to the detection of radiation-induced 2-alkylcyclobutanones whether irradiated or not. Radiation-induced 2-alkylcyclobutanones were extracted from beef and chicken fats, separated by florisil column chromatography and identified with GC/MS method by selected ion monitoring(SIM). When beef and chicken were irradiated, 2-dodecylcyclobutanone, 2-tetradecylcyclobutanone and 2-(5'-tetradecenyl)cyclobutanone were formed from palmitic, stearic and oleic acids. Concentrations of 2-alkylcyclobutanones were linearly increased with the dose levels of irradiation and depended upon the composition of fatty acids in beef and chicken. Radiation-induced 2-alkylcyclobutanones in irradiated beef and chicken were remarkably detected at 1 kGy and over, while these compounds were not detected in non-irradiated samples. The concentrations of radiationinduced 2-alkylcyclobutanones were relatively constant during 6 months.

• Korean Journal of Environmental Agriculture
• /
• v.16 no.4
• /
• pp.333-340
• /
• 1997

An analytical method was developed to determine residues of haloxyfop-R and its methyl ester in soils and soybeans using gas-liquid chromatography (GLC) with electron capture detector (ECD). Soil or soybean sample was acidified and extracted with acetone. The extract was then subjected to ion-associated partition to individually separate haloxyfop-R and the neutral methyl ester. One phase containing haloxyfop-R was methylated with $BF_3$/methanol, partitioned to n-hexane and analyzed by GLC/ECD. The other phase containing the methyl ester was further purified by Florisil column chromatography prior to GLC determination. No cross contamination was found between two phases containing each of the acid and methyl ester, thus two compounds can be separately determined as the identical haloxyfop-R-methyl. Overall recoveries of haloxyfop-R from fortified samples averaged 88.2${\pm}$3.9% (n=12) and 88.3${\pm}$4.0% (n=6) for soils and soybeans respectively, and those of haloxyfop-R-methyl showed mean values of 89.2${\pm}$4.0% (n=12) and 85.6${\pm}$5.6% (n=6). Detection limits of both haloxyfop-R and its methyl esterwere 0.005㎎/㎏ and 0.01㎎/㎏ for soil and soybean samples respectively.

• Analytical Science and Technology
• /
• v.16 no.1
• /
• pp.48-58
• /
• 2003

The effects of physico-chemical properties of soils on PCBs analysis in Korea was studied Three kinds of extraction solvents(toluene, acetone:hexane, dichloromethane) was selected to apply three different soils. The silicagel, florisil and alumina column cleanup also performed to compare the elution patterns, and three different methods (EPA, Japan, Proposed method in this study) of 62 PCBs also compared the individual peaks recoveries. The solvent average recovery was surveyed the order of toluene, acetone:hexane, dichloromethane as 77.94%, 58.59%, 54.20% for soil A, 53.65%, 80.32%, 68.27% for soil B and 44.52%, 60.35%, 56.36% for soil C, respectively. The average recovery was depended on the soil characters. The highest recoveries of each soil were obtained the toluene for soil A, acetone:hexane for soil B and C. However, the coplanar PCBs was obtained the highest recovery with dichloromethane. Thus, to select the solvent for the analysis of PCBs in solid, the selected compounds have to consider to get good result. The silicagel, florisil, alumina I and alumina II column cleanup process were surveyed the range of 38.73%~98.26%, and the higher chlorinated compounds was obtained the lower recovery compared to the low chlorinated compounds, generally. This results are also consistent with the coplanar PCBs isomers. The compared results of three different countries were obtained the 37.15% for USA, 45.92% for Japan and 44.46% for proposed method in this study.

• The Korean Journal of Pesticide Science
• /
• v.15 no.1
• /
• pp.22-27
• /
• 2011

Nonylphenols are toxic compounds classified as endocrine disruptors. We investigated the nonylphenols clean-up procedures for the contamination control in the quantitative analysis. In this research we analyzed the residual nonylphenols in the solvent and the SPE cartridges. First, at the analysis of HPLC grade solvents (n-hexane, diethyl ether, ethyl acetate and its mixture), diethyl ether was confirmed the residue as 0.963 ${\mu}g/mL$, and we eliminated the contaminant through the distillation with $CaH_2$, Second, at the analysis of SPE cartridges (silica gel and Florisil), all products were showed the residue at 0.046~13.0 ${\mu}g/mL$, but unfortunately the residue in the cartridge were not easily removed with referenced methods in all tested SPE cartridges except in silica gel SPE cartridge with glass ware.

• Journal of Food Hygiene and Safety
• /
• v.27 no.4
• /
• pp.332-338
• /
• 2012

A simple and sensitive analytical method was developed using gas chromatography with electron capture detector (GC-ECD) and gas chromatography-mass spectrometry (GC-MS) for determination of Picoxystrobin in agricultural products (apple, hulled rice, mushroom, pepper, soybean, and mandarin). Picoxystrobin residues were extracted with acetonitrile, partitioned with saline water, and then they were cleaned up on a florisil solid-phase extraction (SPE) cartridge to obtain an extract suitable for analysis by GC-ECD and GC-MS. The method was validated using 6 agricultural product samples spiked with Picoxystrobin at different concentration levels (0.02, 0.05 and 0.5 mg/L). Average recoveries of Picoxystrobin (using each concentration three replicates) ranged 64.0~98.3% with relative standard deviations less than 10%, calibration solutions concentration in the range 0.1~5 mg/L, and limit of detection (LOD) and limit of quantification (LOQ) were 0.005 and 0.02 mg/L, respectively. The result showed that the developed analytical method is suitable for Picoxystrobin determination in agricultural products.

• Journal of the Korean Society of International Agriculture
• /
• v.30 no.4
• /
• pp.339-346
• /
• 2018

Cyanazine is a member of the triazine family of herbicides. Cyanazine is used as a pre- and post-emergence herbicide for the control of annual grasses and broadleaf weeds. This experiment was conducted to establish a determination method for cyanazine, as domestic unregistered pesticide, residue in major agricultural commodities using HPLC-DAD/MS. Cyanazine was extracted with acetone from representative samples of five raw products which comprised apple, green pepper, Kimchi cabbage, hulled rice and soybean. The extract was diluted with saline water and partitioned to dichloromethane for remove polar extractive in the aqueous phase. For the hulled rice and soybean samples, n-hexane/acetonitrile partition was additionally employed to remove non-polar lipids. The extract was finally purified by optimized florisil column chromatography. On a $C_{18}$ column in HPLC, cyanazine was successfully separated from co-extractives of sample, and sensitively quantitated by diode array detection at 220 nm. Accuracy and precision of the proposed method was validated by the recovery experiment on every major agricultural commodity samples fortified with cyanazine at 3 concentration levels per agricultural commodity in each triplication. Mean recoveries were ranged from 83.6 to 93.3% in five major representative agricultural commodities. The coefficients of variation were all less than 10%, irrespective of sample types and fortification levels. Limit of quantitation(LOQ) of cyanazine was 0.02 mg/kg as verified by the recovery experiment. A confirmatory method using LC/MS with selected-ion monitoring(SIM) technique was also provided to clearly identify the suspected residue.