• Transactions of Materials Processing
• /
• v.27 no.5
• /
• pp.289-295
• /
• 2018

The profile ring rolling process can realize various ring shapes unlike conventional rectangular cross-sectional ring products. In this paper, the defective groove in the bottom surface of L-shaped ring products was analyzed. Grooves are generated by non-uniform external forces due to profile main roll and initial blank shape. Process parameters such as the motion of dies and working temperature were determined. Mechanism of groove formation was analyzed by FE simulation on the basis of local external forces acting on the blank. Analysis results were similar to the groove actually occurring in the production line. Based on results of the analysis, two solutions were proposed for the groove. The position of the base plate supporting the blank was adjusted and edge length of the main roll was extended to suppress growth of grooves. It has been verified that groove was improved by applying two proposed methods in the shop-floor.

• Korean Journal of Cleft Lip And Palate
• /
• v.6 no.1
• /
• pp.35-42
• /
• 2003

PAP (Palatal Augmentation Prosthesis) may be given to the patients with dysphagia; especially, who cannot achieve tongue-palate contact. PAP fills hard palate area where the tongue cannot make contact and then the distance of tongue elevation is shortened. 1bat may be expected to improve swallowing and to prevent from aspiration. The purpose of this report is to show the effects of PAP in patients with dysphagia through the videofluoroscopic study. Oral-pharyngeal swallowing post PAP is analyzed in 2 cases; one is a person who had subarachnoid hemorrhage due to aneurysmal rupture, right hemiparesis, hydrocephalus and aphamia. And the other is a person who had squamous cell carcinoma on mouth floor and he had radical neck dissection and marginal mandibulectomy. In this report, the rate of aspiration, the transit time and length measurements of anatomical structure are examined in the each frame of videofluoroscopy. The results are as follows; 1) PAP decreased the aspiration in both cases. 2) In the cases of patients with PAP, the pharyngeal transit time was decreased.

• Journal of the Korean housing association
• /
• v.17 no.5
• /
• pp.147-157
• /
• 2006

A study on Composing Unit Spaces of Apartment Houses according to the Differentiation in Lifestyle by survey on preferences. The purpose of this study is to propose composition models of unit spaces for 85m2 net area apartment houses by lifestyle types. This study set up a hypothesis that there is a critical divergence of preferences in composition types of unit spaces according to lifestyle. To prove the hypothesis, investigation on variable floor plans of apartments to extract spatial composition types of units and questionnaire survey on lifestyleand preferences for composition types were implemented. To extract several factors regarding, characteristics of lifestyle, factor analysis, was implemented for each variable. Cluster analysis was conducted to cluster interviewees by similarity of lifestyle. To identify and define how each factor reacts, ANOVA and cross tabulation analysis between factors and clusters were used. The type of spatial composition was analyzed by plane characteristic, spatial relation and spatial usability on the basis of apartment plate type. As a result, lifestyle was divided into three types: reasonable lifestyle, trend-seeking lifestyle and conservative lifestyle. As, the result of investigating characteristics for the type of spatial composition according to the type of lifestyle, preferred types and main districts were different. Therefore, the hypothesis was proved.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2007.12a
• /
• pp.73-83
• /
• 2007

We interpreted marine seismic profiles in conjunction with swath bathymetric and magnetic data to investigate rifting to breakup processes at the eastern Korean margin that led to the separation of the southwestern Japan Arc. Analysis of rift fault patterns suggests that rifting at the Korean margin was primarily controlled by normal faulting resulting from extension rather than strike-slip deformation. Two extension directions of E-W and NW-SE for rifting are recognized. We interpret that the E-W direction represents initial rifting at the inner margin and the NW-SE direction probably represents the extension in response to tensional tectonics associated with the subduction of the Pacific Plate in the NW direction. No significant volcanism was involved in rifting. In contrast, the inception of sea floor spreading documents a pronounced volcanic phase which appears to reflect asthenospheric upwelling as well as rift-induced convection particularly in the narrow southern margin. We suggest that structural and igneous evolution of the Korean margin, although it is in a back-arc setting, can be explained by the processes occurring at the passive continental margin with magmatism influenced by asthenospheric upwelling.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2001.10a
• /
• pp.459-466
• /
• 2001

The floor vibration aspect for building structures which are in need of large open space are influenced by the interrelation between natural frequency and working loads. Structures with a long span and low natural frequency have a higher possibility of experiencing excessive vibration induced by dynamic excitation such as human activities. These excessive vibrations make the residents uncomfortable and the serviceability deterioration. Need formulation of loads data through actual measurement to apply walking loads that is form of dynamic load in structure analysis. The loads induced by human activities were classified into two types. First type is in place loads. the other type is moving loads. A series of laboratories experiments had been conducted to study the dynamic loads induced by human activities. The earlier works were mainly concerned to parameters study of dynamic loads. In this Paper, the walking loads have been directly measured by using the measuring plate in which two load cells were placed, the parameters, the load-time history of walking loads, and the dynamic load factors have been analyzed. Moreover, the shape of the harmonic loads which were gotten by decomposition the walking loads have been analyzed , and the walking loads modeling have been carried out by composition these harmonic loads derived by functional relation.

• Proceedings of the Korea Environmental Mutagen Society Conference
• /
• 2002.05a
• /
• pp.14-23
• /
• 2002

Development of oligodendrocytes and the generation of myelin internodes within the spinal cord depends on regional signals derived from the notochord and axonally derived signals. Neuregulin (NRG)-1, localized in the floor plate as well as in motor and sensory neurons, is necessary for normal oligodendrocyte development. Oligodendrocytes respond to NRGs by activating members of the erbB receptor tyrosine kinase family. Here, we show that erbB2 is not necessary for the early stages of oligodendrocyte precursor development, but is essential for proligodendroblasts to differentiate into galactosylcerebroside-positive (GalC+) oligodendrocytes. In the presence of erbB2, oligodendrocyte development is normal. In the absence of erbB2 (erbB2-/-), however, oligodendrocyte development is halted at the proligodendroblast stage with a >10-fold reduction in the number of GalC+ oligodendrocytes. ErbB2 appears to function in the transition of proligodendroblast to oligodendrocyte by transducing a terminal differentiation signal, since there is no evidence of increased oligodendrocyte death in the absence of erbB2. Furthermore, known survival signals for oligodendrocytes increase oligodendrocyte numbers in the presence of erbB2, but fail to do so in the absence of erbB2. Of the erbB2-/- oligodendrocytes that do differentiate, all fail to ensheath neurites. These data suggest that erbB2 is required for the terminal differentiation of oligodendrocytes and for development of myelin.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.4
• /
• pp.351-357
• /
• 2003

An easy learning elevator originated is opened to compare the existed teaming equipment, and it had a high studied efficiency that the sequence control circuit can open and close with the wire. The structure of equipment to be controlled from the first floor to the fifth floors is demostrated by the constructive apparatus with the lamps to express the function of the open-close of the door according to the cage moving with a mechanical actuation of the forward reverse breaker and the motor of load, and the mechanical actuation of hand-operation control components of push-button S/W and L/S and relay etc. These components let connect each other in order to control of the elevator function with the auto program and the designed sequence control circuit. Consequently the cage could go and come till 1∼5 steps with an auto program of the elevator and the sequence control circuit. The sequence control circuit is controlled by the step of forward and reverse to follow as that the sensor function of L/S1 ∼ L/S5 let posit with the control switchs of S/W1 ∼ S/W5 of PLC testing panel and switchs of S/W1 ∼ S/W5 installed on the transparent acryl plate of the frame. In here, improved apparatus is the hand-auto operation combined learning equipment to study the principle and technique of the originate sequence control circuit and the auto program of PLC.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.16 no.1
• /
• pp.19-32
• /
• 2003

The structural system of a hybrid building is composed of upper shear wall which resist lateral force by bending deformation and lower frame which resist lateral force by shear deformation. A deep transfer girder is used to transfer gravity load safely from super structures to structural frame beneath. Because of the vertical discontinuity, a building with transfer girder must be analyzed by dynamic analysis. However, this structural system has many problems in performing dynamic analysis that cannot be solved by general analysis procedure. The slabs In transfer floor are considered as either a Plate element or a rigid diaphragm in finite element analysis without appropriate evaluation of their characteristics. Therefore, a reasonable analysis method is proposed in this study by evaluating the diaphragm effect of a hybrid structure system.

• Design & Manufacturing
• /
• v.15 no.3
• /
• pp.13-18
• /
• 2021

In plate forming technology, cylindrical drawing process is widely used in industry due to technological development. In this study, we used stainless steel 3042B and stainless steel 304J1, which are the most commonly used materials in the production of cold and hot water tanks for water purifiers, among cylindrical drawing products. Under the same conditions, the thickness of the sidewall of the product formed by drawn experiment was studied. As a result of the experiment, the bottom thickness of stainless steel 304J1 was considered to be thick. It is judged that the defect rate can be reduced by changing the breaking phenomenon of the floor surface of the cold and hot water bottles to the material of stainless steel 304j1. Stainless steel 304 2B material shows a sharp change in thickness from punch corner R to sidewall position, while stainless steel 304J1 material showed a uniform change from punch corner R to sidewall position. Stainless steel 304J1 material is considered to improve the clamping of the product in the process of extracting the product after hand drawing. The appearance of stainless steel 3042B products is considered to produce more wrinkles in the flange, which exerts greater tensile force on the sidewall during molding, resulting in uneven sidewall thickness.

• The Journal of Korean Physical Therapy
• /
• v.34 no.4
• /
• pp.175-180
• /
• 2022

Purpose: Leg length discrepancy causes the posture deformation, gait asymmetry, and lower back pain. The purpose of this study is to investigate the correlation among functional leg length discrepancy (FLLD), muscle activity, muscle contraction onset time and vertical ground reaction force (vGRF) during simple lifting task. Methods: Thirty-nine subjects participated in this study. FLLD was measured from the umbilicus to medial malleolus of left and right leg using a tape. The subjects performed to lift a 10 kg box from the floor to chest. The muscle activity and muscle contraction onset time of rectus abdominis, erector spinae and rectus femoris was measured using EMG system and vGRF was measured by two force plate. Pearson correlation was used to fine out the correlation among FDDL, muscle activity, muscle contraction onset time and vGRF during simple lifting task. Results: Correlation between FLLD and difference of muscle activity of short-long side was very high (r>0.9) during simple lifting task. Correlation between FLLD and difference of muscle contraction onset time of short-long side was very high (r>0.9) during simple lifting task. And correlation between FLLD and difference of vGRF of short-long side was high (r>0.7) during simple lifting task. Conclusion: This study suggests that there is high correlation between FLLD and muscle activity, muscle contraction onset time, and ground reaction force during simple lifting task. Therefore, FLLD could negatively affect the postural balance.