• Magazine of the Korean Society of Agricultural Engineers
• /
• v.30 no.3
• /
• pp.58-68
• /
• 1988

Most of the Korean watersheds are mountaineous and consist of various soil types and land uses And seldom watersheds are found to have long term hydrologic records. The SNUA, a hydrologic watershed model was developed to meet the unique characteristics of Korean watershed and simulate the storm hydrographs from a small mountaineous watershed. Also the applicability of the model was tested by comparing the simulated storm hydrographs and the observed from Dochuk watershed, Gwangjugun, Kyunggido The conclusions obtained in this study could be summarized as follows ; 1. The model includes the simulation of interception, evaporation and infiltration for land surface hydrologic cycle on the single storm basis and the flow routing features for both overland and channel systems. 2. Net rainfall is estimated from the continuous computation of water balance at the surface of interception storage accounting for the rainfall intensities and the evaporation losses at each time step. 3. Excess rainfall is calculated by the abstraction of infiltration loss estimated by the Green and Ainpt Model from the net rainfall. 4. A momentum equation in the form of kinematic wave representation is solved by the finite differential method to obtain the runoff rate at the exit of the watershed. 5. The developed SNUA Model is a type of distributed and event model that considers the spatial distribution of the watershed parameters and simulates the hydrograph on a single storm basis. 6. The results of verification test show that the simulated peak flows agree with the observed in the occurence time but have relative enors in the range of 5.4-40.6% in various flow rates and also show that the simulated total runoff have 6.9-32% of relative errors against the observed. 7. To improve the applicability of the model, it was thought that more studies like the application test to the other watersheds of various types or the addition of the other hydrologk components describing subsurface storages are needed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.862-866
• /
• 2005

For urban watershed models, the ILLUDAS and SWMM are the popular rainfall-runoff models used in Korea. However, combined sewage systems in urban areas produced problems when a flood occured because of the surcharged precipitation amount which drained to the streams directly. Also, the lack of pipe line data and the difficulties of modeling yield inappropriate modeling results in urban runoff analysis. In addition, rainfall-runoff models in urban areas which use channel routing could have inaccurate and complicated processes. In this paper, the MIKE SWMM model has been applied for the stable runoff analysis of urban areas. Watershed and pipe line data were established by using past inundated records, DEM data, and the numerical pipe line data. For runoff modelings, the runoff block was adapted to a basin and the Extran block using dynamic equations was applied to the sewage system. After comparing to models that exist, it is concluded that the MIKE SWMM model produces reliable and consistence results without distorting the Parameters of the model.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.17-24
• /
• 2018

The HEC-HMS model was applied to identify the rainfall-runoff processes for the Anseongchun basin, where the lower part of the stream has been damaged severely by tropical storms in the past. Modeling processes include incorporating with the SCS-CN model for loss, Clark's UH model for transformation, exponential recession model for baseflow, and Muskingum model for channel routing. The parameters were calibrated through an optimization technique using a trial and error method. Sensitivity analysis after calibration was performed to understand the effects of parameters, such as the time of concentration, storage coefficient, and base flow related constants. Two storm water events were simulated by the model and compared with the corresponding observations. Good accuracy in predicting the runoff volume, peak flow, and the time to peak flow was achieved using the selected methods. The results of this study can be used as a useful tool for decision makers to determine a master plan for regional flood control management.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.6 no.1
• /
• pp.1-11
• /
• 2003

In this study, TOPMODEL(TOPography based hydrologic MODEL) was tested linked with Muskingum river routing technique for $581.7km^2$ Anseong-cheon watershed. Linear trend surface interpolation was used to give flow direction for flat areas located in downstream watershed. MDF (multiple flow direction) algorithm was adopted to derive the distribution of ln(a/$tan{\beta}$) values of the model. Because the coarser DEM resolution, the greater information loss, the watershed was divided into subwaterhseds to keep DEM resolution, and the simulation result of the upstream watershed was transferred to downstream watershed by Muskingum techniques. Relative error of the simulated result by 500 m DEM resolution showed 27.2 %. On the other hand, the relative error of the simulated result of 300 m DEM resolution by linked 2 subwatersheds with Muskingum method showed 15.8 %.

• Journal of Korea Water Resources Association
• /
• v.37 no.1
• /
• pp.43-54
• /
• 2004

The objective of this study is to propose reservoir operation method in relation to the suspended sediment concentration due to rainstorms. Present analysis is made for the Tamjin reservoir which is under construction. For the hydrologic computations the Huff rainfall distribution, Clark unit hydrograph method and Puls reservoir routing method are used. The variation of suspended sediment concentration is calculated by 2-dimensional RMA-4 model. As a result of this study, the possible intake time from the reservoir under low frequency flood is estimated and the rainfall-ret urn period - possible intake time relationship is established, which is very important in maintaining the water quality standard when supplying water from the reservoir for different utilizationurn period- possible intake time relationship is established, which is very important in maintaining the water quality standard when supplying water from the reservoir for different utilizations.

• Proceedings of the Korea Water Resources Association Conference
• /
• 1998.05a
• /
• pp.62-67
• /
• 1998

낙동강 수계 다목적댐 하류 지역에 대한 홍수조절 의사결정 능력을 향상시키고자 강우- 유출 모형으로 선정된 저류함수법으로 낙동강 수계 다목적댐 하류부의 유역유출 체계를 먼저 구 성하였다. 저류함수법에 의한 낙동강 수계 유역유출 체계도는 유역의 물리적 특성을 감안하여 소 유역은 41개, 하동망은 28개로 구성하였다. 또한 수문학적 하도추적 기법이 갖는 결점을 보완하기 위하여 낙동강 본류 및 상류에 댐이 있는 금호강, 황강, 남강, 밀양강 등 1 지류 이상의 홍수추적 을 수리학적 모형으로 보완하여 유역유출 체계를 이원화하여 두시스템을 상호·연계할 수 있도록 하였다. 상기 두 시스템을 '93년 8월 홍수(8, 7~8, 15)에 시험 적용하였다. 모형수행 경과 홍수기 댐운영시 저류함수모형에 의한 강우 유출 모형과 수리학적 하도추적 모형을 통합한 시스템을 동시에 적용하여 상호 보완 과정을 통해 운영한다면 다목적댐의 홍수조절 의사결정능력을 향상시킬 수 있다고 판단된다. 본 연구에서는 사용자가 해석적 방법으로 유역에서 수문자료를 이용하여 매개변수를 대화식으로 산정할 수 있는 GUI 시스템을 EXCEL97 환경에서 개발하여 신뢰성 있는 Rating curve가 확보 상·하류에 위치한 12개 수위관측소에서 89개 홍수사상을 대상으로 유역의 매개변수를 산정하였다. 또한, 미계측 유역의 저류함수 관련 매개변수 확장을 위하여 12개 소유역 에 대한 매개변수의 평균값과 유역면적, 하도연장 및 경사, 유역의 사면경사 등의 지형인자들을 조합하여 지역화분석을 수행하여 미계측 유역의 매개변수 산정식으로 제안하였다. 본 회귀식으로 산정된 소유역별 매개변수를 '93년 8월 홍수(8, 7~8, 15)에 적용한 결과, 낙동강 수계 본류상 주요 수위관측소별 홍수량예측이 이근천공식 보다 양호한 결과를 주어 본 연구에서 제시한 유역의 매 개변수 회귀식은 미계측 유역의 매개변수 산정시 충분한 활용성을 입증하였다. 저류함수법에 의 한 낙동강 수계 다목적댐 하류부의 유역유출 체계도는 수리학적 하도추적 모형과의 연계와 유역 의 물리적 특성을 감안하여 현재의 홍수통제소에서 운영하는 홍수예경보 시스템의 유출체계도와 우리공사 물관리 상황실의 저수관리 모형의 유출체계도를 기준으로 재구성하여 다목적댐 하류부의 소유역은 41개, 하도망은 28개로 결정하였다.

• Journal of Korea Water Resources Association
• /
• v.51 no.5
• /
• pp.405-415
• /
• 2018

Hydraulic variables such as discharge coefficient, gate opening, and upstream water depth are required to calculate the discharge of vertical lift gate. It is very important for a precise gate design, because it may affect the rest, to predict the behavior of gate opening during operation. In this study, an equation by which gate opening could be predicted with any upstream water depths was derived from the relation between the calculated value from buoyancy theory and measured one from experiment for a floating gate model. Downpull force was the reason for the differences between the calculated and the measured and it was verified using pressure coefficient. Also, the relation of discharge coefficient with gate opening ratios was derived. The derived relations were used for flood routing and it was realized that downpull force effect should be fully taken into account during gate design.

• Convergence Security Journal
• /
• v.20 no.1
• /
• pp.33-40
• /
• 2020

The rainwater pumping station located near a river prevents river overflow and flood damages by operating several pumps according to the appropriate rules against the reservoir. At the present time, almost all of rainwater pumping stations employ pumping policies based on the simple rules depending only on the water level of reservoir. The ongoing climate change caused by global warming makes it increasingly difficult to predict the amount of rainfall. Therefore, it is difficult to cope with changes in the water level of reservoirs through the simple pumping policy. In this paper, we propose a pump operating method based on deep reinforcement learning which has the ability to select the appropriate number of operating pumps to keep the reservoir to the proper water level using the information of the amount of rainfall, the water volume and current water level of the reservoir. In order to evaluate the performance of the proposed method, the simulations are performed using Storm Water Management Model(SWMM), a dynamic rainfall-runoff-routing simulation model, and the performance of the method is compared with that of a pumping policy being in use in the field.

• Journal of Korea Water Resources Association
• /
• v.38 no.11
• /
• pp.907-916
• /
• 2005

For an urban watershed modeling, the ILLVDAS and SWMM model were the popular rainfall-runoff models using in Korea. However, combined sewerage systems in urban area produce some problems when a flood event happens because of the surcharged precipitation amounts which drain to streams directly. Also, rack of pipe line data and difficulties of modeling yield inappropriate modeling results in urban runoff analysis. In addition, rainfall-runoff models in an urban which using channel routing could be inaccurate and complicated processes. In this paper, the MIKE SWMM model has been applied for a stable urban area runoff analysis. Watershed and pipe line data were established by using past inundated records, DEM data and numerical pipe line data. For a runoff modeling, the Runoff block was adapted to a basin and the Extran block using dynamic equation was applied for sewerage system. After a comparisons against existing models yield that the MIKE SWMM model produce reliable and consistence results without distorting parameter of the model.

• Journal of Korea Water Resources Association
• /
• v.42 no.3
• /
• pp.259-270
• /
• 2009

The applicability of the developed distributed rainfall runoff model using a multi-directional flow allocation algorithm and a real-time updating algorithm was evaluated. The rainfall runoff processes were simulated for the events of the Andong dam basin and the Namgang dam basin using raingauge network data and weather radar rainfall data, respectively. Model parameters of the basins were estimated using previous storm event then those parameters were applied to a current storm event. The physical propriety of the multi-directional flow allocation algorithm for flow routing was validated by presenting the result of flow grouping for the Andong dam basin. Results demonstrated that the developed model has efficiency of simulation time with maintaining accuracy by applying the multi-directional flow allocation algorithm and it can obtain more accurate results by applying the real-time updating algorithm. In this study, we demonstrated the applicability of a distributed rainfall runoff model for the advanced basin-wide flood management.