• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2001년도 학술발표회 발표논문집
• /
• pp.340-343
• /
• 2001

The main objective of this study is to simulate design flood discharge of the Sungjoo basin. GIS and HEC-HMS were used in this study. GIS technique can extract various hydrological factors from D.E.M(Digital Elevation Model) and the parameters extracted from each watershed were applied to the HEC-HMS. As a result of this study, GIS technique is useful to tile extraction of watershed characteristics factors and HEC-HMS is successful in tile simulation of design flood discharge.

• Korean Journal of Hydrosciences
• /
• 제5권
• /
• pp.17-31
• /
• 1994

Because of the Keumkangsan-Dam and the Peace-Dam constructed in recent years, it is expected that the peak flood discharge and the peak flood stage at the Hwachun-Dam site have been changed. In this study, two methods were used to simulate and compare the effects of the upstream dam construction on the change of the discharge and the stage. One is the storage function method widely used for the hydrological routing in the country. The other is the DWOPER(Dynamic Wave Operational Model) package conducted on four different scenarios: (1) before the construction of the Keumkangsan-Dam and the Peace-Dam; (2) the exclusion of the Keumkangsan-Dam watershed (before the construction of the Peace-Dam); (3) the exclusion of the Keumkangsan-Dam watershed (after the construction of the Peace-Dam) ; (4) the exclusion of the Peace-Dam watershed. The results of the four test cases from the two methods show that the peak flood discharge and the peak flood stage at the Hwachun-Dam site are reduced due to the construction of the Peace-Dam. From these findings, it is suggested that the operational criteria for the optimal dam-operation of the Hwachun-Dam need to be modified.

• 산업기술연구
• /
• 제26권A호
• /
• pp.129-137
• /
• 2006

In this research, we made a one and two-dimensional analysis of numerical data collected from the bend curvature of a bended river section. According to the result from the numerical analysis, the inflow ＆ output angle caused a water level deviation which increased with an increase of the flood discharge. From the water level deviation of our two-dimensional numerical model, we obtained the maximum slope of 6,67% when the inflow and output angle was 105 degrees and the flood discharge was 500 CMS. As for the right side, the differences with the one-dimensional numerical model were reduced when the angle was more than $90^{\circ}$. As for the left side the differences were reduced when the angle was more than $105^{\circ}$. For a river with more than 90 degrees bend curvature, a hydraulic experiment would be more appropriate than a numerical analysis.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2015년도 학술발표회
• /
• pp.173-173
• /
• 2015

The flood water level in tidal river is determined by the joint effects of flood discharge and tidal water levels at downstream boundary. Due to the variable tidal boundary conditions, the evaluated design water levels associated with a certain flood event can be significantly different. To avoid determining of design water levels just by a certain tidal boundary condition and remove the influence of variability in boundary condition from the evaluation of design water levels, a probabilistic approach is considered in this study. This study focuses on the development of a method to evaluate the realistic design water levels in tidal river with taking into account the combined effects of river discharge and tidal level. The flood water levels are described by the joint probability of two driving forces, river discharge and tidal water levels. The developed method is applied to determine design water levels for the tidal reach of the Han River. An unsteady flow model is used to simulate the flow in the reach. To determine design water levels associated with a certain flood event, first, possible boundary conditions are obtained by sampling starting times of tidal level time series; then for each tidal boundary condition, corresponding peak water levels along the channel are computed; and finally, design water levels are determined by computing the expectations of the peak water levels. Two types of tides which are composed by different constituents are assumed (one is composed by $M_2$, and the other one is composed by $M_2$ and $M_2$) at downstream boundary, and two flood events with different maximum flood discharges are considered in this study. It is found that (a) the computed design water levels with two assumed tides have no significant difference for a certain flood event, though variability of peak water levels due to the tidal effect is considerably different; (b) tidal effect can reach to the Jamsil submerged weir and the effect is obvious in the downstream reach of the Singok submerged weir; (c) in the tidally affected reach, the variability of peak water levels due to the tidal effect is greater if the maximum flood discharge is smaller.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.591-594
• /
• 2007

The purpose of this study is to estimate the critical flood discharge and flash flood trigger rainfall for alarm system providing for a flash flood in mountainous. This study was effectively estimated a topographic characteristic factor of basin using the GIS. Especially, decided stream order using GIS at stream order decision that is important for input variable of GCIUH. Result that calculate threshold discharge to use GCIUH, at the Mureung valley basin, flash flood trigger rainfall was 16.34mm in the first 20 minutes when the threshold discharge was $14.54\;m^3/sec$.

• 대기
• /
• 제30권2호
• /
• pp.155-167
• /
• 2020

In order to produce more detailed and accurate information of river discharge and freshwater discharge, global high-resolution hydrodynamic model (CaMa-Flood) is applied to an operational land surface model of global seasonal forecast system. In addition, bias correction to grid runoff for the hydrodynamic model is attempted. CaMa-Flood is a river routing model that distributes runoff forcing from a land surface model to oceans or inland seas along continentalscale rivers, which can represent flood stage and river discharge explicitly. The runoff data generated by the land surface model are bias-corrected by using composite runoff data from UNH-GRDC. The impact of bias-correction on the runoff, which is spatially resolved on 0.5° grid, has been evaluated for 1991~2010. It is shown that bias-correction increases runoff by 30% on average over all continents, which is closer to UNH-GRDC. Two experiments with coupled CaMa-Flood are carried out to produce river discharge: one using this bias correction and the other not using. It is found that the experiment adapting bias correction exhibits significant increase of both river discharge over major rivers around the world and continental freshwater discharge into oceans (40% globally), which is closer to GRDC. These preliminary results indicate that the application of CaMa-Flood as well as bias-corrected runoff to the operational global seasonal forecast system is feasible to attain information of surface water cycle from a coupled suite of atmospheric, land surface, and hydrodynamic model.

• 한국환경과학회지
• /
• 제24권4호
• /
• pp.425-435
• /
• 2015

A number of projects for development have been done continuously due to the increase of tourist in Jeju Island. However flood disaster countermeasure due to urbanization is not considered during this development projects. This study is to make basic process for the flood estimation in Han stream of Jeju Island. The variation of stream discharge due the every 5 years' land use change from 1980 to 2005. Data for flood events (rainfall and discharge) were collected for HEC-HMS model. Clark method was used for unit hydrograph analysis. For the estimation of Clark unit hydrograph parameters, Kraven II and Sabol's empirical equations were applied. The peak discharge increased 9.9~33.67% and total discharge amount increased 12.53~30.21%. Also, time of concentration for peak discharge was reduced by 10 minutes for each event.

• 대한토목학회논문집
• /
• 제38권3호
• /
• pp.407-415
• /
• 2018

본 연구는 댐의 시간당 홍수유출자료와 강우-유출모형의 모의를 통해 댐의 홍수조절에 대한 역할과 댐 상류 및 하류의 공간적인 영향에 대해 분석하였다. 이를 위한 연구지역으로 안동댐과 임하댐의 영향을 받는 낙동강 상류유역을 선정하였으며 1997년부터 2010년까지의 홍수사상 31개를 분석하였다. 댐의 홍수저감율(Flood Reduction Rate: FRR) 분석은 홍수규모가 커질수록 댐의 방류가 커져 댐의 홍수저감율이 작아질 것으로 예상하였으나 몇몇 사상을 제외하고 예상과 다른 결과를 보였다. 홍수크기와 홍수저감율의 관계성은 유출총량(Volume)이 첨두 유출량(Peak discharge)보다 잘 나타내었다. 선정 유역에서 가장 거리가 있는 성주수위관측소에서의 두 댐 영향은 댐상류 유역면적이 크고 홍수저감율이 큰 안동댐이 평균적으로 7% 크게 영향을 미쳤다. 성주수위관측소가 포함하는 유역을 기준으로 유역면적의 비와 홍수저감율의 비를 비교하면 댐의 홍수저감율은 면적의 비보다 대부분 작게 나타나는 것을 보였다. 댐의 홍수저감율의 영향은 댐이 포함하는 유역면적의 8.5배에 해당하는 유역면적에서 홍수저감율이 10% 이하로 떨어지는 것으로 분석되었으며 이는 남한강유역의 결과(7배)보다 크게 나타난 것이다.

• 한국습지학회지
• /
• 제21권spc호
• /
• pp.90-97
• /
• 2019

최근 연속적인 호우사상으로 인해 홍수가 발생하고 있으며, 이로 인한 재산 및 인명피해가 증가하고 있다. 따라서 본 연구에서는 연속적인 호우사상 발생 사례를 바탕으로 거대강우 시나리오와 거대홍수를 정의하였다. 경안천 유역의 100년 빈도 확률강우사상이 연속적으로 발생한다는 가정하에 거대강우 시나리오를 생성하였으며, 거대홍수량을 산정하기 위하여 SSARR(Streamflow Synthesis and Reservoir Regulation)모형을 이용하였다. 또한, 보다 합리적인 유출해석을 수행하기 위하여 SCE_UA기법을 통해 매개변수를 추정하고, SSR(Sum of Squared of Residual)과 첨두유량 모의에 유리한 WSSR(Weighted Sum of Squared of Residual)의 목적함수를 이용하여 모형의 보정 및 검증을 수행하였다. 이를 통해 적합성 검토를 수행하였다. 그 결과, 경안천 유역의 100년 빈도 강우사상의 연속발생으로 인한 거대홍수량은 4,802㎥/s로 산정되었고, 경안천하천정비기본계획(2011)에서 산정한 100년 빈도 단일 강우사상에 의한 홍수량은 3,810㎥/s으로 산정되었다. 따라서 거대홍수량이 단일 호우사상에 의한 홍수량 보다 약 992㎥/s 만큼 증가하는 것으로 확인되었으며, 이는 향후 거대홍수를 고려할 경우, 경안천 유역의 치수방어대책 수립시 참고자료로 활용할 수 있을 것으로 기대된다.

• 한국수자원학회논문집
• /
• 제42권9호
• /
• pp.725-736
• /
• 2009

홍수사상은 크게 첨두홍수량, 홍수용적, 지속기간 등과 같은 서로 상관된 세 가지의 요소로 정의될 수 있다. 그러나 그동안 수공학적 계획이나 설계, 운영 등을 위한 홍수빈도해석에서는 주로 첨두홍수량 한가지 요소에 초점을 맞추어 홍수빈도해석을 수행해 왔다. 이러한 단변량 홍수빈도해석은 서로 상관된 홍수사상 사이의 복잡한 확률적 거동을 분석하는 데 있어 한계를 가지고 있다. 따라서, 본 연구에서는 Gumbel 혼합모형을 이용한 이변량 홍수빈도해석을 수행하여 홍수심도를 평가하는 방안을 제시하였다. 소양강댐의 35개년 일유입량 자료와 대청댐의 28개년 일유입량자료에 대해 각각의 홍수사상을 분리하고, 분리한 홍수사상에 대해 첨두홍수량과 홍수용적 사이의 결합분포와 결합재현기간 등을 도출하였다. 또한 이러한 이변량 홍수빈도해석에 의해 도출된 홍수 특성을 단변량 홍수빈도해석의 결과와 비교함으로써, 홍수심도 평가에 있어 이변량 홍수빈도 해석기법의 적용성에 관하여 검토하였다.