• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2008년도 춘계학술발표회
• /
• pp.249-255
• /
• 2008

2007년 12월 7일 태안앞바다에서 발생한 Hebei Spirit호와 크레인바지선 삼성 1호의 충돌사고로 인한 대형오염사고의 발생단계에서 대응하는 전 과정을 통해 많은 문제점이 지적되었다. 이에 따라 저자는 이번 오염사고를 오염방지 측면에서 그 원인을 집중적으로 분석하여 개선책, 즉 예인선의 예인시의 출항통제 및 항해검사 기준 강화, VTS 서비스 확충 및 관리책임부서를 해양경찰청으로의 이관, 적합한 정박지 지정 및 선종별, 화물별, 목적별로 분리하여 정박지 관리, 위험물운반선의 특별관리시스템 도입 등을 제시함으로써 추후 오염사고의 방지에 도움을 주고자 하였다.

• 한국항만경제학회지
• /
• 제25권3호
• /
• pp.67-92
• /
• 2009

현재 우리나라에서 시행되는 예선서비스의 신청 및 예선배정방식은 항만유형에 따라 상이하게 존재하고 있으며 크게 공동배선제와 자유계약제로 구분 할 수 있다. 공동배선제란 선사가 예선업체를 선택할 수 있는 권리가 없으며 입출항 순서와 선박의 크기에 맞게 각 항만별 예선조합지회에서 결정된 방법에 따라 예선서비스를 공급받는 방식을 말한다. 자유계약제란 선사가 예선의 선택권을 갖고 예선업체를 선택하고 필요한 마력의 예선을 선택하는 방식을 말한다. 예선서비스의 특성 중의 하나는 예선의 안정적인 공급을 통한 선박 입 출항 및 이 접안의 지원이다. 이를 위해서는 예선업체가 적정한 수익을 창출하여 신조예선의 투입, 선원의 복지정책 실시 등의 지속적인 사업을 영위하여야 한다. 본 연구에서는 공동배선제를 실시하는 항만과 자유계약제를 실시하는 항만에서 예선사업을 전개하고 있는 예선업체들의 재무분석을 실증적으로 실시하여 예선업체가 적정수익을 창출하고 있는지를 분석하였다. 공동배선제를 실시하는 항만이 성장성 측면, 수익성 측면, 활동성 측면에서 자유계약제를 실시하는 항만보다 우수한 것으로 분석되었으며, 자유계약제하의 항만은 레버리지 비율 측면에서만 우수한 것으로 분석되어 항만에서 예선서비스의 안정적 공급을 고려할 때, 공동배선제를 더욱 확대 실시하여야 한다.

• Ocean Systems Engineering
• /
• 제6권2호
• /
• pp.143-159
• /
• 2016

Cargo, such as a Tension Leg Platform (TLP), Semi-submersible platform (Semi), Spar or a circular Floating Production Storage and Offloading (FPSO), are frequently dry-transported on a Heavy Lift Vessel (HLV) from the point of construction to the point of installation. The voyage can span months and the overhanging portions of the hull can be subject to frequent wave slamming events in rough weather. Tie-downs or sea-fastening are usually provided to ensure the safety of the cargo during the voyage and to keep the extreme responses of the cargo, primarily for the installed equipment and facilities, within the design limits. The proper design of the tie-down is dependent on the accurate prediction of the wave slamming loads the cargo will experience during the voyage. This is a difficult task and model testing is a widely accepted and adopted method to obtain reliable sea-fastening loads and extreme accelerations. However, it is crucial to realize the difference in the inherent stiffness of the instrument that is used to measure the tri-axial sea fastening loads and the prototype design of the tie-downs. It is practically not possible to scale the tri-axial load measuring instrument stiffness to reflect the real tie-down stiffness during tests. A correlation method is required to systematically and consistently account for the stiffness differences and correct the measured results. Direct application of the measured load tends to be conservative and lead to over-design that can reflect on the overall cost and schedule of the project. The objective here is to employ the established correlation method to provide proper high-frequency responses to topsides and hull design teams. In addition, guidance for optimizing tie-down design to avoid damage to the installed equipment, facilities and structural members can be provided.

• 대한조선학회논문집
• /
• 제54권1호
• /
• pp.49-56
• /
• 2017

Recently, many research works on the icebreaking vessels have been published as the possibility of passing Arctic routes has been increasing. The model ship test on the pack ice model in the ice basin is actively carried out as a way to investigate the performance of icebreaking vessels. In this test, the concentration of pack ice is important since it directly affects the performance. However, it is difficult to measure the concentration because not only the pack ice has uneven shape but also it keeps floating around in the basin. In this paper, an algorithm to identify the concentration of pack ice is introduced. From a digital image of pack ice obtained in the ice basin, the goal is to measure the area of pack ice using an image processing technique. Instead of the general global binarization that yields numerical errors in this problem, a local binarization technique, coupled with image subdivision based on the quadtree structure, is developed. The concentration results obtained by the developed algorithm are compared with the manually measured data to prove its accuracy.

• 한국유체기계학회 논문집
• /
• 제17권2호
• /
• pp.41-47
• /
• 2014

Experimental results are given for the vertical motion of water in the water chambers for wave energy converter aligned along the wave propagation direction in order to avoid the impulsive wave forces. This paper mainly focuses on the property of the amplitude of the vertical motion of the water surface in the chambers. The amplification has been investigated by dimensionless parameters of wave period to resonance period ratio of the U-shaped oscillation, $T/T_r$, chamber size to wave length ratio, l/L, water depth to wave length ratio, h/L, amplitude of up-down motion of water particles to draft of the front wall ratio, ${\zeta}/D$. It has been shown that l/L should be less than 0.1 and as $T/T_r$ approaches unity the up-down of the water in the chambers is amplified. Also, the structure of the walls which form th water chambers has been examined roughly. It is deduced that the chambers set on both sides of the hull of a single-point moored floating vessel is preferable to those set along a fixed structure such as breakwaters.

• 한국항해학회지
• /
• 제10권2호
• /
• pp.83-96
• /
• 1986

In the restricted sea way such as fair way in harbor, narrow channel etc, the safe ship-handling is a very important problem, which is greatly related with turning ability of ships. It is of great importance that ship-handlers can grasp the position of pivoting point varying with time increase at any moment for relevant steering activities. Mean while, in advanced ship-building countries they study and investigated pivoting point related with turning characteristics, hut their main interest lies in ship design, not in safe ship controlling and maneuvering. In this regards it is the purpose of this paper to provide ship-handlers better under standing of pivoting point location together with turning characteristics and then to help them in safe ship-handling by presenting fact that pivoting points vary according to configuration of ships. The author calculated the variation of pivoting point as per time increase for various type of vessels, based on the hydrodynamic derivatives obtained at test of Davidson Laboratory of Stevens Institutes of Technology , New Jersey, U.S.A. The results were classified and investigated according to the magnitude of block coefficient , length-beam ratio, length-draft ratio, rudder area ratio ete, and undermentioned results were obtained. (1) The trajectory of pivoting point due to variation of rudder angle are all the same at any time, though the magenitude of turning circle are changed variously. (2) The moving of pivoting point is affected by the magnitude of block coefficient, length-beam ratio, length-draft ratio, however the effect by rudder area ratio might be disregarded. (3) In controlling and maneuvering of vessels in harbor, ship-handlers might regard that the pivoting point would be placed on 0.2~0.3L forward from center of gravity at initial stage. (4) The pivoting point of VLCC or container feeder vessels which have block coefficient more than 0.8 and length-beam ratio less than 6.5 are located on or over bow in the steady turning. (5) When a vessel intends to avoid some floating obstruction such as buoy forward around her eourse, the ship-handler might consider that the pivoting point would be close by bow in ballast condition and cloase by center of gravity in full-loaded condition.

• 한국항해항만학회지
• /
• 제34권5호
• /
• pp.311-317
• /
• 2010

하역장치가 장착된 모바일하버 선박은 새로운 해상운송시스템 개념으로, 특정 정박지에서 대형 컨테이너 선박에 계류하여 해상상태 3 이하 조건에서 신속하면서 효율적인 컨테이너 하역작업을 수행하는 것이다. 모바일하버와 관련한 주요 연구로는 고속하역시스템, 부유체 구조 설계, 안벽하역시스템 해석 및 작업크레인 설계 등의 원천기술 개발을 중심으로 수행되었다. 본 연구는 모바일하버 선박의 하역작업 중 동적안정성 확보를 위한 계류안정화시스템을 개발하고자 하는 것으로, 국내외 계류장치에 대한 현황 분석을 기초로 현재 선박에 탑재되어 있는 의장장치인 윈치시스템에 계류안정화 기능을 추가시킨 포지셔닝윈치를 개발하여 모선과의 상대운동을 최소화하는 방안에 대한 개념설계를 제안한다.

• Nuclear Engineering and Technology
• /
• 제51권7호
• /
• pp.1738-1748
• /
• 2019

Previous research has shown that the inclined condition has an impact on the natural circulation (natural circulation) mode operation of Floating Nuclear Power Plant (FNPP) mounted on the movable marine platform. Due to its compact structure, small volume, strong maneuverability, the Integral Pressurized Water Reactor (IPWR) is adopted as marine reactor in general. The OTSGs of IPWR are symmetrically arranged in the annular region between the reactor vessel and core support barrel in this paper. Therefore, many parallel natural circulation loops are built between the core and the OTSGs primary side when the main pump is stopped. and the inclined condition would lead to discrepancies of the natural circulation drive head among the OTSGs in different locations. In addition, the flow rate and temperature nonuniform distribution of the core caused by inclined condition are coupled with the thermal hydraulics parameters maldistribution caused by OTSG group operating mode on low power operation. By means of the RELAP5 codes were modified by adding module calculating the effect of inclined, heaving and rolling condition, the simulation model of IPWR in inclined condition was built. Using the models developed, the influences on natural circulation operation by inclined angle and OTSG position, the transitions between forced circulation (forced circulation) and natural circulation and the effect on natural circulation operation by different OTSG grouping situations in inclined condition were analyzed. It was observed that a larger inclined angle results the temperature of the core outlet is too high and the OTSG superheat steam is insufficient in natural circulation mode operation. In general, the inclined angle is smaller unless the hull is destroyed seriously or the platform overturn in the ocean. In consequence, the results indicated that the IPWR in the movable marine platform in natural circulation mode operation is safety. Selecting an appropriate average temperature setting value or operating the uplifted OTSG group individually is able to reduce the influence on natural circulation flow of IPWR by inclined condition.

• 대한한의학원전학회지
• /
• 제34권4호
• /
• pp.27-64
• /
• 2021

Objectives : This paper examined the Buddhist contents within the text, Bencaoshengyabanji(本草乘雅半偈). Methods : Medicinals that were searched through Buddhist vocabulary were examined. Results & Conclusions : Medicinals that quoted the Lengyanjing were related to the Water-Fire interaction, food and medicine, and karma, while those that quoted the Shidian were related to 無上道, 去惡殺蟲, 樞機滑利, and 生生之氣. Those related to the Great Earth of the Four Elements corrected the body's form based on Metal Qi, while those related to the Great Water were connected to the circulation of water dampness. Those related to the Great Fire were deeply related to Yang Qi, and those related to the Great Wind were connected to Wind control. Of the Four Origins, medicinals that were viviparous lowered Qi, while those that were oviparous were related to communicating Shen, treating diseases of the Conception Vessel, and the closing and opening of day and night. Medicinals originating from dampness were related to urination and fluid management, while those of metamorphosis were related to the process of Qi. Those related to emptiness were related to the communication of the Qi system, while those related to 六根六塵 were connected to calming the Shen and strengthening the will, and smoothing the nine orifices. Medicinals related to 圓通 were used for improving eyesight and hearing and controlling the closing and opening. Lu Zhi-yi's analysis of medicinals through the Lengyanjing is original in that it suggested a new perspective other than previous theories on pharmacology which were based on the Yin-Yang and Five Phases and Rising/Lowering/Floating/Sinking theories, but also pedantic and exaggerated. The Bencaoshengyabanji is a unique text on medicinals which analyzed each medicinal under Buddhist influence. However, it also followed the contexts of other previous texts on medicinals, and influenced Zou shu.

• Composites Research
• /
• 제34권6호
• /
• pp.350-356
• /
• 2021

활주 선형의 선박은 직선으로 운항하거나 선회할 때, 그 속도에 따라 위치와 트림이 변화하며, 선체에 큰 저항이 발생한다. 본 논문에서는 탄소복합소재를 선체에 적용하여 선체무게와 내구성이 향상된 레저보트의 전산유체역학을 통해 선형에 대한 저항을 추정하였다. 18ft급 레저보트의 선수부와 선미부의 저항 성능을 확인하고 선형 전체의 유동장을 추정하였으며, 수치해석을 통해 각 트림의 저항을 비교하여 선형에 대한 안정성을 확인하였다. 또한, 선체에 걸리는 힘이 크지 않아 설계된 선형이 충분히 견딜 수 있을 것을 확인하였고, 파도의 파장과 배의 길이를 관성력에 대한 중력의 비로 계산하여 롤링이 얼마의 힘으로 발생하는지 확인하여 보트의 안정성을 분석하였다.