• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.1173-1176
• /
• 2007

This paper investigates the natural modes and static reponses of modularized floating structure. As an example structure, a floating parking place$(120m{\times}60m)$ is considered. In the evaluation of natural modes and static responses, numerical equations are formulated by FEM(Finite Element Method) and the natural modes are solved by subspace iteration method. By comparing responses of structures of various sizes of module unit, the effect of unit size is also investigated.

• Journal of the Society of Naval Architects of Korea
• /
• v.56 no.5
• /
• pp.396-409
• /
• 2019

In this paper, a comparative study on the radiation techniques for the motion analysis of the three dimensional floating structure with the forward speed was carried out. The Sommerfeld radiation condition, the damping technique, and the point shift technique were used for the comparative study. Radiated wave patterns and hydrodynamic coefficients of the heave motion of floating structure with the forward speed were compared and analyzed. The characteristics and limitations of each radiation technique were analyzed through the calculation results. To overcome the limitations of conventional radiation techniques, the hybrid radiation technique combining the Sommerfeld radiation condition with the damping technique was proposed. It is confirmed that the proposed method, the Hybrid radiation technique, improves the limitation of the speed range and the dissipation of the wave of the conventional radiation technique. The motion analysis code of the three dimensional floating structure with the forward speed based on the Rankine source method with hybrid radiation technique was developed. In order to validate the developed code, hydrodynamic analyses were carried and compared with published experiments.

• Journal of Ocean Engineering and Technology
• /
• v.5 no.2
• /
• pp.16-30
• /
• 1991

A numerical procedure is described for predicting the dynamic responses of combined systems of floating breakwaters and huge offshore structures supported by a large numer of the floating bodies in waves. The hydrodynamic interactins among tatal floating bodies are taken into account in their exact form within the context of linear potential theory. Wave control effects are discussed with both hydrodynamic interactions and hydrodynamic-structure interaction effects. The method presented is applicalbe to combined systems of floating breakwaters and huge structures for ocean space utilization for which a number of practical uses are seen in the future.

• Journal of Ocean Engineering and Technology
• /
• v.5 no.2
• /
• pp.156-156
• /
• 1991

A numerical procedure is described for predicting the dynamic responses of combined systems of floating breakwaters and huge offshore structures supported by a large numer of the floating bodies in waves. The hydrodynamic interactins among tatal floating bodies are taken into account in their exact form within the context of linear potential theory. Wave control effects are discussed with both hydrodynamic interactions and hydrodynamic-structure interaction effects. The method presented is applicalbe to combined systems of floating breakwaters and huge structures for ocean space utilization for which a number of practical uses are seen in the future.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.4
• /
• pp.222-228
• /
• 2015

Power MOSFETs (metal oxide semiconductor field effect transistor) operate as energy control semiconductor switches. In order to reduce energy loss of the device, it is essential to increase its conductance. However, a trade-off relationship between the breakdown voltage and conductance of the device have been the critical difficulty to improve. In this paper, theoretical analysis of electrical benefits on single floating island power MOSFET is proposed. By the method, the optimization point has set defining the doping limit under single floating island structure. The numerical multiple 2.22 was obtained which indicates the doping limit of the original device, improving its ON state voltage drop by 45%.

• Journal of the Korea Society of Computer and Information
• /
• v.5 no.3
• /
• pp.76-83
• /
• 2000

The continuous time signal system by development of CMOS technology have been receiving consideration attention. In this paper, Low pass filter using new CMOS floating resistor have been designed with cut off frequency for speech signal Processing. Especially a new floating resistor consisting entirely of CMOS devices in saturation has been developed. Linearity within $\pm$0.04% is achieved through nonlinearity via current mirrors over an applied range of $\pm$1V The frequency response exceeds 10MHz, and the resistors are expected to be useful in implementing integrated circuit active RC filters. The low pass filter designed using this method has simpler structure than switched capacitofilter. So reduce the chip area. The characteristics of the designed low pass filter using this method are simulated by pspice program.

• Journal of the Society of Naval Architects of Korea
• /
• v.56 no.1
• /
• pp.11-22
• /
• 2019

In this paper, a Rankine source method is applied and validated to analyze the hydrodynamic response of a three-dimensional floating structure in the frequency domain. The boundary value problems for radiation and diffraction problem are solved by using a desingularized indirect boundary integral equation method (DIBIEM). The DIBIEM is simpler and faster than conventional methods based on the numerical surface integration of Green's function because the singularities of Green's function are located outside of fluid regions. In case of floating structure with complex geometry, it is difficult to desingularize the singularities of Green's function consistently. Therefore a mixed approach is carried out in this study. The mixed approach is partially desingularized except singularities of the body. Wave drift loads are calculated by the middle-field formulation method that is mathematically simple and has fast convergence. In order to validate the accuracy of the developed program, various numerical simulations are carried out and these results are analyzed and compared with previously published calculations and experiments.

• Composites Research
• /
• v.26 no.2
• /
• pp.105-110
• /
• 2013

In this study, we suggest the new floating PV generation structure which is improved the structural and economical efficiency compared with the system developed in the previous research. Pultruded FRP has superior physical and chemical material properties compared with those of conventional structural materials. Especially, pultruded FRP has an excellent corrosion-resistance, light-weight, and it also has high specific strength and stiffness which are highly appreciated for the design and fabrication of floating PV generation structure under harsh environmental condition. In this study, structural analysis using the finite element method has been performed to investigate the safety of new floating PV generation structure and newly applied structural members.

• Journal of Navigation and Port Research
• /
• v.36 no.3
• /
• pp.225-232
• /
• 2012

In this research, the influence of additional vertical deformation of floating pontoon when dead load of each story is loaded during construction was investigated. The analysis procedure is presented for considering the influence of the additional deformation to calculate the additional moment of super-frame. Following the procedure, an example building with 3 storied steel frame was analyzed. Analysis method that taking no account for deformation of pontoon to the modeling was underestimated by ignoring design load following deformation of vertical load. By operating the load at the same time, design load under the influence of large deflection of model which whole modeling of floating structure was overestimated. So analysis method of floating structure considering the construction sequences demonstrated the suitable method.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.2
• /
• pp.26-32
• /
• 2001

In this paper, elastic responses of a floating structure in waves with a breakwater are presented. The method of source-dipole distribution is used to analyze the velocity potentials for the fluid region. The deflections of structure are expanded approximately in terms of natural mode functions of free-free beam. The model for present calculation is a floating plate with an length of 1000m and the hydroelastic responses for a floating structure with a straight breakwater are shown. The effects of distance between breakwater and structure, bending rigidity and relative length of regular waves are examined.