• 제목/요약/키워드: Float Type

검색결과 70건 처리시간 0.02초

불일치 사례로 유발되는 초등학생들의 반응에 대한 정성적 연구 (A Qualitative Study on the Elementary School Students' Responses Produced by a Discrepant Event)

  • 고한중;석종임;노태희;강석진
    • 한국초등과학교육학회지:초등과학교육
    • /
    • 제24권4호
    • /
    • pp.426-434
    • /
    • 2005
  • In this study, elementary school students' responses toward a discrepant event about a float-or-sink problem were investigated through semi-structured interviews. Initial participants were 61 fifth-grade students from two elementary schools. After excluding the students who did not possess the target misconception from the results of a preconception test and who were not willing to participate in an interview, 31 students (14 males and 17 females) were finally interviewed by two teacher-interviewers. During the interviews, students were first provided with a hands-on experiment which was the same as the situation in the preconception test, and then they were asked about believability of the discrepant event, inconsistency between the discrepant event and their existing conceptions, and belief change after experiencing the discrepant event. Interviews were audio- and video-taped, and then were transcribed by two interviewers. After analyzing the interview transcriptions, we found four types of students' responses; rejection, uncertainty, peripheral belief change, and belief change. We also found that belief change response type should be classified into three distinctive subtypes; belief decrease, ad-hoc belief change, and analytical-abductive belief change.

  • PDF

2차원 경계요소법을 이용한 부유체의 운동 특성 연구 (Analysis on motions characteristics of Floaters using two-dimensional Boundary Element Method)

  • 백미선;성유창
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2013년도 춘계학술대회
    • /
    • pp.136-138
    • /
    • 2013
  • 현재 해상교통안전시설인 표준등부표의 종류는 10가지이며, 가장 작은 등부표가 4.4m로 대형인 것이 현실이다. 따라서 제작, 교체 및 수리가 용이한 부유형의 소형 등부표를 제안하고자 하였다. 한편 부유형의 경우 환경적 외력에 의한 위치 신뢰도가 떨어지며, 특히 유실 등의 사고에 대비하기 위한 안정성 검토가 필요하다. 이 논문에서는 새로운 등부표의 운동성(Heave, Sway, Pitch)을 상용프로그램을 사용하여 Encounter Frequency별 분석하고, 2차원 경계요소법(Boundary Element Method, BEM)을 이용하여 부유체의 단면형상에 따른 유체력을 수치시뮬레이션하였다.

  • PDF

깊이카메라를 이용한 파고장 계측 시스템의 구축 (Development of Wave Height Field Measurement System Using a Depth Camera)

  • 김호용;전찬일;서정화
    • 대한조선학회논문집
    • /
    • 제58권6호
    • /
    • pp.382-390
    • /
    • 2021
  • The present study suggests the application of a depth camera for wave height field measurement, focusing on the calibration procedure and test setup. Azure Kinect system is used to measure the water surface elevation, with a field of view of 800 mm × 800 mm and repetition rate of 30 Hz. In the optimal optical setup, the spatial resolution of the field of view is 288 × 320 pixels. To detect the water surface by the depth camera, tracer particles that float on the water and reflects infrared is added. The calibration consists of wave height scaling and correction of the barrel distortion. A polynomial regression model of image correction is established using machine learning. The measurement results by the depth camera are compared with capacitance type wave height gauge measurement, to show good agreement.

신경망과 유전알고리즘을 이용한 고효율 태양전지 접촉형성 공정 최적화 (Process Optimization of the Contact Formation for High Efficiency Solar Cells Using Neural Networks and Genetic Algorithms)

  • 정세원;이성준;홍상진;한승수
    • 한국정보통신학회논문지
    • /
    • 제10권11호
    • /
    • pp.2075-2082
    • /
    • 2006
  • 이 논문은 p-type single-crystalline float zone (FZ) 웨이퍼를 이용한 고효율 태양전지 제조 공정상의 공정 모델링과 최적화 기술에 대하여 서술하였다. 태양전지 제조 공정 중 중요한 4가지의 공정 1) Emitter formation; 2) Anti-Reflection-Coating (ARC): 3) Screen-printing; 4) Contact formation 중에서 제조비용을 줄여주며, 성능을 증대 시키는데 중요한 contact formation 공정을 모델링을 하고, 최적화 하였다. 본 논문에서는 공정에 소요되는 시간과 비용을 줄이기 위해 실험 계획법 (design of experiments: DOE) 중 중심 합성계획 (central composite design)을 이용하여 24개의 요인 (factorial), 8개의 축점 (axial points), 3개의 중심점 (center points)과 실험의 범위를 증가시키기 위한 6개의 임의점(random points)으로 실험계획을 수립하였다. 접촉형성(contact formation) 공정 이후에는 실험 결과를 사용하여 신경망 (neural network)으로 모델링을 하였다. 수립된 신경망 모델을 바탕으로 유전자 알고리즘 (genetic algorithm)을 이용하여 다양한 조합의 공정 파라미 터를 합성하는 방법으로 최적화를 수행하여 고효율의 태양전지를 구현할 수 있는 최적의 공정 조건을 수립하였다.

활하중 분포에 따른 콘크리트 부유식 컨테이너 터미널의 구조성능 및 거동 (Structural Performance and Behavior of Concrete Floating Container Terminal by Live Load Distributions)

  • 이두호;정연주;유영준
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제19권1호
    • /
    • pp.72-80
    • /
    • 2015
  • 본 연구에서는 총 10가지 다양한 컨테이너 활하중 분포에 따른 콘크리트 부유식 컨테이너 터미널 하부슬래브의 휨응력분포와 변위분포를 비교분석하였다. 또한, 대상구조물의 구조성능과 거동을 수치해석적으로 검토하였다. 활하중 분포에 따른 구조성능 검토결과 3가지 하중분포 (A, B, D-type)는 인장거동을 보이며, 그 외의 7가지 하중분포 (C, E, F, G, H, I, J-type)에서는 압축거동을 나타내었다. 특히, D, F-type에서는 과도한 압축응력이 발생하였으며, 부력 프리플랙션 제어를 통하여 압축응력을 저감할 수 있을 것으로 사료된다. 활하중 분포에 따른 구조거동 검토결과 B, E, F, I-type에 대한 부유구조체의 기울기가 메가플로트 기준을 초과하였으며, 이와 같은 하중분포는 컨테이너 적하 시에 회피해야 될 것으로 판단된다. 종합적으로, 부유식 컨테이너 터미널에 관련된 기준 및 연구가 많지 않은 현실을 감안할 때, 본 연구는 컨테이너 터미널의 구조성능 및 거동을 검토를 위한 초석이 될 것이며, 사용 가이드라인으로 활용이 가능할 것으로 판단된다.

보행(步行) 이앙기(移秧機)를 위(爲)한 무선자동제어(無線自動制御) 시스템의 개발(開發)(II) -공시기(供試機)의 포장실험(圃場實驗)- (Development of a Wireless Control System for Rice Transplanter of Walking Type(II) -Field Test of the Experimental Machine-)

  • 김창수;최규홍;민영봉;김성태
    • Journal of Biosystems Engineering
    • /
    • 제17권3호
    • /
    • pp.213-222
    • /
    • 1992
  • To develop the wireless remote opreating system of walking rice transplanter, this study was carried out for manufacturing the wireless remote control system acting upon the transplanter. The first report of this study contained about the construction and operating method of a developed remote control system for 2-row walking type transplanter. It is the second report about the field test for an experimental transplanter being attached a wireless control system and for a conventional transplanter. The test was executed to investigate the characteristics of velocity, rectilinearity, turning time, interval of roots and of rows, and field capacity in accordance with various engine speeds for an experimental transplanter. The measurements of this test were compared with those of the conventional transplanter. The obtained results were as follows : 1. The operating velocity of the experimental transplanter was faster than the conventional one when the high speed range of the engine but the variances were very large. 2. The rectilinearity, interval of raws and of roots, and the turning time of the experimental transplanter was inferior to the conventional one at some speed ranges of the engine. 3. Field capacity of the experimental transplanter was superior to the conventional one at high speed of the engine. 4. There were some disadvantages for the experimental transplanter to operate, because it was constructed without any aid devices, such as float and hydraulic system for instance. But if the remote control system of this study equip at the modern walking transplanter, it will be improved and utilized without defects which was revealed from this test.

  • PDF

대청호 수류차단막 설치 위치에 따른 녹조제어 효과 분석 (Analysis the Effects of Curtain Weir on the Control of Algal Bloom according to Installation Location in Daecheong Reservoir)

  • 이흥수;정세웅;정희영;민병환
    • 한국물환경학회지
    • /
    • 제26권2호
    • /
    • pp.231-242
    • /
    • 2010
  • The objective of study was to determine an optimal location of a float-type curtain weir in Daecheong Reservoir and to assess its effectiveness for the control of algal blooms in the reservoir. CE-QUAL-W2, a laterally averaged two-dimensional hydrodynamic and eutrophication model, was modified to accommodate vertical displacement of the weir according to water surface fluctuation and applied to simulate the reservoir hydrodynamics and water quality changes for the reservoir. The model calibrated in a previous study was updated and validated for different hydrological conditions representing drought year (2008) and normal year (2006) for the study, and adequately simulated the temporal and spatial variations of water temperature, nutrients and algal (Chl-a) concentrations. The effectiveness of curtain weir on the control of algal bloom was evaluated by applying the validated model to 2001 and 2006 assuming 9 scenarios for different installation locations. The reduction rates of algal concentration were placed in the range of 11.2~40.3% and 20.3~56.7% for 2001 and 2006, respectively. Although, the performance of curtain weir was slightly varied for different locations and different hydrological years, overall, the performance was improved as the weir was installed further downstream.

Topex/Poseidon 고도계자료를 이용한 동북아시아 연변해역의 해수면 변화 연구 (Sea Level Variabilities in the East Asian Marginal Seas by Topex/Poseidon Altimeter Data)

  • Yoon, Hong-Joo
    • 한국정보통신학회논문지
    • /
    • 제5권6호
    • /
    • pp.1190-1194
    • /
    • 2001
  • TOPEX/POSEIDON(T/P) 위성의 7년 간 고도계자료를 사용하여 동북아시아지역에서의 해수면 순환과 해수면 변화에 대하여 연구하였다. 헌장 조위자료와 고도계자료간의 비교에서, 고도계에 포함되어 있는 60일의 tidal aliasing(M$_2$ 및 S$_2$의 해양조석 성분)의 영향을 제거한 후 순수 해수면 성분을 구하였다. 해수면 변동을 보면 쿠로시오 해류가 사행을 하면서 강하게 흘러가는 일본 동남부해역에서 뚜렷한 와류의 형성과 함께 높은 해수면 변화 값을 보였다. 이것은 쿠로시오의 확장과 해저지형의 영향과 기인하다. 평균해수면은 황해 및 동해에 비해서 북태평양해역에서 높게 나타났다.

  • PDF

스테레오 영상 기반의 객체 탐지 및 객체의 3차원 위치 추정 (Object Detection and 3D Position Estimation based on Stereo Vision)

  • 손행선;이선영;민경원;서성진
    • 한국정보전자통신기술학회논문지
    • /
    • 제10권4호
    • /
    • pp.318-324
    • /
    • 2017
  • 본 항공기에 스테레오 카메라를 장착하여 영상 기반의 비행 객체 탐지 및 탐지된 객체의 3차원 위치를 추정하는 방법을 제시하였다. 구름 사이에 존재할 수 있는 원거리의 작은 객체를 탐지하기 위한 방법으로 PCT 기반의 Saliency Map을 생성하여 이용하였으며, 이렇게 탐지된 객체는 좌우 스테레오 영상에서 매칭을 수행하여 스테레오 시차(Disparity)를 추출하였다. 정확한 Disparity를 추출하기 위하여 비용집적(Cost Aggregation) 영역을 탐지 객체에 맞추어 가변되도록 가변 영역으로 사용하였으며, 본 논문에서는 Saliency Map에서 객체의 존재 영역으로 검출된 결과를 사용하였다. 좀 더 정밀한 Disparity를 추출하기 위하여 Sub-pixel interpolation 기법을 사용하여 Sub-pixel 레벨의 실수형 Disparity를 추출하였다. 또한 이에 카메라 파라미터를 적용하여 실제 탐지된 비행 객체의 3차원 공간 좌표를 생성하여 객체의 공간위치를 추정하는 방법을 제시하였다. 이는 향후 자율비행체의 영상기반 객체 탐지 및 충돌방지 시스템에 활용될 수 있을 것으로 기대된다.

부상웨어 설치에 따른 대청호 조류 성장 억제 효과 수치모의 (Numerical Modeling Effects of a Skimmer Weir Method on the Control of Algal Growth in Daecheong Reservoir)

  • 김유경;정세웅;이흥수;정용락
    • 한국물환경학회지
    • /
    • 제23권5호
    • /
    • pp.581-590
    • /
    • 2007
  • A float-type weir has been proposed for the control of algal blooms in some of eutrophic reservoirs recently. It is known as a costly and ecologically sound method, but there is little understanding about the sustainability of this low-cost technology for reservoirs that are located in monsoon climate areas where large flood events during the summer cause high water surface fluctuations. The objective of this study was to assess the effectiveness of a skimmer weir aimed at controlling algal blooms in the lacustrine zone and near the drinking water withdrawal structures of Daecheong Reservoir under various hydrodynamic flow conditions. The effect of weir on the control of algal blooms was simulated using a laterally averaged two-dimensional hydrodynamic and eutrophication model that can accommodate vertical displacement of the weir following the water surface fluctuations. Numerical simulations were performed for two different hydrological conditions, 2001 and 2004 for representing drought year and normal year, respectively. The results showed that the weir is very effective method to control algal blooms in the reservoir by curtailing the transport of phosphorus and algae from contaminated inflow to the downstream lacustrine epilimnion during the draught year. However, large flood events occurred in 2004 transported nutrients and algae built upstream of the weir into the downstream euphotic zone by strong entrainments.