• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.389-392
• /
• 2011

본 연구에서는 틸트로터 비행체인 스마트무인기의 비행시험에서 엔진성능 데이터를 추출하고 분석하였다. 비행시험은 프롭로터의 틸트각이 90도에서 0도로 변화하고 다시 0도에서 90도로 변환하는 천이비행 영역에서 이루어졌다. 비행시험으로부터 수집된 엔진성능 데이터로서 엔진 동력과 비연료 소모율은 엔진성능계산프로그램의 예측결과와 잘 일치하였다.

• 한국정밀공학회지
• /
• 제33권10호
• /
• pp.781-787
• /
• 2016

We introduce FEST (Flight Environment Simulation Test) procedures for precise guided missiles to reliably improve systems. Flight vibration specification was established based on power spectral density curves calculated from flight test data of a high speed precise guided missile. A FEST pre-profile was developed according to flight vibration specification and delivered to a precise guided missile assembly. Vibration responses were measured by installing accelerometers on electronic components vulnerable to dynamic forces. The FEST profile was adjusted by comparing the vibration responses and the flight vibration specification. Subsequently, the FEST profile was repeatedly modified through trial and error, because the responses were similar to the flight environment. The modified FEST profile enabled performance testing of assembled precise guided missiles under simulated flight conditions on the ground, where unexpected errors could be corrected before the flight tests, leading to cost and risk reduction in the development of the precise guided missile system.

• 제어로봇시스템학회논문지
• /
• 제10권2호
• /
• pp.131-138
• /
• 2004

Automatic flight control system (AFCS) for a low-cost unmanned aerial vehicle is described in this paper. Development process and block diagram of the AFCS are introduced. The flight control law for longitudinal and lateral channel autopilot is designed using optimization process. In this procedure, the performance index is composed of desired location of closed loop system poles and H$_2$norm of the resultant flight control system. This procedure is applied to the autopilot design of an unmanned target vehicle. Performance of the AFCS is evaluated by processor-in-the-loop simulation test and flight test. These results show that the AFCS has acceptable performance fur low cost UAV.

• 한국항공운항학회지
• /
• 제5권1호
• /
• pp.7-16
• /
• 1997

Airspeed and altimeter calibration of Twin Bee was conducted by the flight test. We have adopted system to system method. Flight test data is corrected for instrumented error and position error, and the resultin data was satisfied. Climb Performance flight test also was conducted. But we could not have all data because of limited flight time. The resulted data was satisfied compare with calculated data.

• International Journal of Aeronautical and Space Sciences
• /
• 제5권1호
• /
• pp.57-63
• /
• 2004

UAV(Unmanned Aerial Vehicle) has become one of the most popularmilitary/commercial aerial robots in the new millennium. In spite of all theadvantages that UAVs inherently have, it is not an easv job to develop a UAVbecause it requires very systematic and complete approaches in full developmentenvelop. The ground test and evaluation phase has the utmost importance in thesense that a well-developed system can be best verified on the ground. In addition,many of the aircraft crashes in the flight tests were resulted from the incompletedevelopment procedure. In this research, a verification procedure of the wholeairbome integrated system was conducted including the flight management system.An airbome flight control computer(FCC) senses the extemal environment from thepehpheral devices and sends the control signal to the actuating system using theassigned control logic and flight test strategy. A ground test station controls themission during the test while the downlink data are transferred from the flightmanagement computer using the serial communication interface. The pilot controlbox also applies additional manual actuating commands. The whole system wastested/verified on the wind-tunnel system, which gave a good pitch controlperformance with a preUspecified flight test procedure. The ground test systemguarantees the performance of fundamental functions of airbome electronic systemfor the future flight tests.

• 한국군사과학기술학회지
• /
• 제24권2호
• /
• pp.204-210
• /
• 2021

In this paper, we studied a method of wirelessly checking up the POD for captive flight tests which is performed during the development of guided weapons systems. The wireless power transfer module, the power distribution device, and the battery pack were designed to wirelessly power the captive flight test POD, and the communication device was designed to enable wireless communication between the POD and the check-up device. The communication device was designed to enable WiFi, IR communication, and laser diode communication, so that various communication methods could be tested. Through the performance test, it was confirmed that power was stably supplied to the captive flight test POD, and the wireless communication performance was verified by measuring the delay time and error rate. As a result, by using our system the POD check-up for the captive flight test was performed wirelessly and the data of the captive equipment could be obtained effectively.

• International Journal of Aeronautical and Space Sciences
• /
• 제13권2호
• /
• pp.238-249
• /
• 2012

Flight test of flapping micro air vehicles (FMAVs) is carried out using an instrumented measurement system to obtain various engineering parameters and hence to assess the flight performance of the vehicles through the data investigation. An indoor flight test facility equipped with a motion capture system and tracking cameras is used for the work presented in this paper. Maneuvers including straight-level flight, ground flapping, takeoff and landing are tested. Spatial position and orientation data are obtained from the retro-reflective tracking markers attached to the vehicles. Subsequent test analysis is carried out by generating performance parameters from raw data and then assessing the flight performance by comparison of the vehicles. The main findings of this work confirm that the test method and procedures presented here enable the systematic numerical data measurement and assessment of the flying performances of these vehicles, and show the applicability for the test and evaluation of general flapping MAVs.

• 한국산학기술학회논문지
• /
• 제20권4호
• /
• pp.479-488
• /
• 2019

비행시험 운용절차는 유도무기 비행시험 시스템 설계 및 구현을 위한 중요 산출물의 하나로서 비행시험 진행 단계별 임무계획, 수행방법, 안전대책 등을 포함한다. 유도무기체계 개발이 첨단화, 전략화 됨에 따라서 유도무기 비행시험은 점차 복잡화, 광역화 되고 있다. 이에 따라 시험안전을 확보하기 위해서는 비행시험 운용절차의 신뢰성 증대가 요구되었다. 특히, 새로운 개념의 비행시험 수행을 위해서 시험 전 불확실성을 예측하고 대비할 수 있도록 비행시험 운용절차 설계에서 M&S 기법의 적용을 통한 검증이 필요하게 되었다. 관련 연구로서 비행시험의 최적 프레임워크 개발 연구와 비행시험 프로세스 모델기반 개선 연구들이 발표되었지만, 상위 개념의 프로세스를 중심으로 한 결과로서 하위 수준의 비행시험 자원과 연동하는 비행시험 운용절차에 직접 적용하기에는 구체성이 부족하였다. 또한, 기존의 문서기반으로 구성된 비행시험 운용절차는 시험자원의 거동과 성능에 대한 분석능력의 한계로 시험자원의 중복과 누락, 직관적이지 않는 표현으로 운용자 간의 의사소통 저하, 그리고 다수의 비행시험에 적용하기 위한 확장성 부족 등의 문제가 발생하였다. 이를 개선하기 위해 본 논문에서는 모델기반 시스템공학(MBSE) 기법의 적용을 통한 유도무기 비행시험 운용절차의 설계 방법을 제안하였다. 구체적으로 이전의 비행시험 정보를 기반으로 비행시험 진행 단계와 수행방안을 정의한 후, 요구사항으로부터 시험자원의 임무수행을 SysML 모델 기반으로 구성한 템플릿으로 제공하였다. 또한 시뮬레이션 분석을 통해서 정상상황과 비상상황에 대한 최적의 수행절차를 도출하였으며, 사례 적용을 통해서 검증하였다. 본 연구를 통해서 시험자원의 거동과 성능에 대한 분석능력의 증대로 신뢰성이 향상되었고, 다수의 비행시험에 적용할 수 있는 확장성으로 효율성이 증대되었으며, 향후 개발 예정인 유도 무기 비행시험에도 지속적으로 활용할 수 있다.

• 한국항공운항학회지
• /
• 제3권1호
• /
• pp.37-47
• /
• 1995

It is very important to determine the performance and operating envelope of engine for aircraft's flight. The basic performance is provided by manufacturer, but installed engine's operating envelop is only determined by flight test. First, this study was measured cylinder head temperature(CHT), exhaust gas temperature(EGT) and oil temperature. At pre-determined altitude and power rate, these temperatures were measured by change of mixture ratio and mixture ratio condition for economic operation and max. power were found. And secondly, with the measured temperatures, possible positions of mixture lever were determined by flight test for stable flight Chang-91 and Lycoming IO-360-A series four cylinders engine with 200 hp was used for this study.

• 한국항공운항학회지
• /
• 제15권4호
• /
• pp.9-16
• /
• 2007

Tilt rotor aircraft can take off and land vertically and cruise faster than any other helicopter. A scaled flight demonstration model of a tilt rotor aircraft has been developed by KARI. Because the flight characteristics of tilt rotor are not well known, the developed scaled model would be helpful to evaluate flight control algorithm of a full scale aircraft. The tethered hover test has been performed in order to improve hover flight characteristics of tilt rotor aircraft prior to flight test of the small scaled model. During the tethered hover test, the performance of rotor speed governor, rate SAS (Stability Augmentation System) and control surface mixers have been evaluated. We expect that the results of real flight hover test would be quite same as tethered hover test. Therefore the tethered hover test results will reduce the risk of flight test properly by fixing some of hidden problems which might occur during the flight test. This paper presents the results of tethered hover test in detail and shows how it could be final ground test before flight test. The control mixer gain and rate SAS feedback gains were modified in order to get higher controllability and stability during the tethered hover flight. The rotor governor showed that it could keep rotor RPM constant with very small deviation even during severe pilot collective input change. The tethered hover test results gave pilot and engineers confirmation and experience about the scheduled flight test.