• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.5
• /
• pp.774-780
• /
• 2011

The guidance control module is needed for control of a GPS guided bombs to improve the accuracy and availability of a conventional bomb. In this paper, we present the development of hardware design, software design and test environments of it. And we also show the process of the tests and the results verifying and proving for its required functions and performances through ground tests and flight tests.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.7
• /
• pp.660-665
• /
• 2011

Reconfigurable Flight Simulator for an airborne tactical mission based on virtual reality technology is developed as a software configurable cockpit with computer display as virtual instruments. It can simulate F-15K, KF-16, T/A-50 class fighter and depending on simulated cockpit, control stick and throttle are replaceable. For effective immersion, Video See-Through type HMD is applied.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.8
• /
• pp.745-751
• /
• 2008

This paper presents a framework for GPS/INS/Vision based navigation system of helicopters. GPS/INS coupled algorithm has weak points such as GPS blockage and jamming, while the helicopter is a speedy and high dynamical vehicle amenable to lose the GPS signal. In case of the vision sensor, it is not affected by signal jamming and also navigation error is not accumulated. So, we have implemented an GPS/INS/Vision aided navigation system providing the robust localization suitable for helicopters operating in various environments. The core algorithm is the vision based simultaneous localization and mapping (SLAM) technique. For the verification of the SLAM algorithm, we performed flight tests. From the tests, we confirm the developed system is robust enough under the GPS blockage. The system design, software algorithm, and flight test results are described.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.12
• /
• pp.1238-1243
• /
• 2008

This paper presents an HILS(Hardware in the Loop Simulations) based experimental study for the UAV's flight trajectory planning/generation algorithms and guidance/control laws. For the various mission that is loaded on each waypoint, proper trajectory planning and generation algorithms are applied to achieve best performances. Specially, the 'smoothing path' generation and the 'tangent orbit path' guidance laws are presented for the smooth path transitions and in-circle loitering mission, respectively. For the control laws that can minimize the effects of side wind, side slip angle($\beta$) feedback to the rudder scheme is implemented. Finally, being implemented on real hardwares, all the proposed algorithms are validated with integrations of hardware and software altogether via HILS.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.4
• /
• pp.559-567
• /
• 1987

In this paper, the real time simulation of continuous dynamic system was performed by general integration algorithms using multiprocessor. For the stable simulation, the relation between stability of integration method and integration step-size was investigated from the stability graph. As a typical illustration, the real-time digital simulation and the real-time hard-ware-in-the-loop simulation of flight control system were performed and reviewed. Moreover through the real-time simulation, the design verification and performace test of flight control system could be evaluated. The computer used for simulation is AD10, which is a very high-speed special-purpose computer designed specifically for a time-critical simulation of large and complex models of dynamic systems. The simulation validity is demonstrated by comparing hardware simulation results with software simulation results.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.28 no.1
• /
• pp.59-65
• /
• 2020

This paper presents comparative results of configuration modeling and aerodynamic analysis to single-engine airplanes such as C-172, SR-20, and DA40NG. The software OpenVSP was used as an airplane configuration modeling tool. OpenVSP can provide the fastest method to get three-dimensional aircraft configuration from given basic data and drawings of aircraft. Parametric design input in OpenVSP, from given aircraft geometric parameters, was applied to small airplanes mentioned. New aircraft models in this study were reversely designed to coincide with the publicly obtained dimensions of the original aircraft. The basic aerodynamic analysis of newly designed modeling aircraft was performed by the vortex lattice method. Results are shown that the similarity of aerodynamic data obtained except for the lack of DA40NG. In conclusion, the modeling process applied to this work is valuable to obtain conceptual design insight in the reverse design from the small airplanes currently in use for flight training.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.7 no.1
• /
• pp.69-76
• /
• 2004

When simulating the mission flight of a fighter equipped with the avionic ECM pod, it is massively required to provide the correct information of threats, to depict the real environment of mission area, and to precisely model the capability of the ECM system. Also, in order to get the reliable results of those simulation, it should be supported the flexible changes of threat environments and the examination of multiple flight paths. This paper presents a software system which is possible to flexible and interactive ECM simulation. This system has capable of the 2D or 3D visualization of virtual battle field, the management of electronic threat data, and the simulation of engagement model.

• Advances in aircraft and spacecraft science
• /
• v.6 no.5
• /
• pp.371-389
• /
• 2019

The implementation of a robust $H_{\infty}$ Control, which is numerically efficient for uncertain nonlinear dynamics, on longitudinal and lateral autopilots is realised for a quarter scale Piper J3-Cub model accepted as an unmanned aerial vehicle (UAV) under the condition of sensor noise and disturbance effects. The stability and control coefficients of the UAV are evaluated through XFLR5 software, which utilises a vortex lattice method at a predefined flight condition. After that, the longitudinal trim point is computed, and the linearization process is performed at this trim point. The "${\mu}$-Synthesis"-based robust $H_{\infty}$ control algorithm for roll, pitch and yaw displacement autopilots are developed for both longitudinal and lateral linearised nonlinear dynamics. Controller performances, closed-loop frequency responses, nominal and perturbed system responses are obtained under the conditions of disturbance and sensor noise. The simulation results indicate that the proposed control scheme achieves robust performance and guarantees stability under exogenous disturbance and measurement noise effects and model uncertainty.

• Journal of Aerospace System Engineering
• /
• v.8 no.2
• /
• pp.21-26
• /
• 2014

The aircraft manufacturers are constantly driving to reduce manufacturing lead times and cost at the same time as the product complexity increases and technology continues to change. Integrated Modular Avionics (IMA) is a solution that allows the aviation industry to manage their avionics complexity. IMA defines an integrated system architecture that preserves the fault containment and 'separation of concerns' properties of the federated architectures. In software side, the air transport industry has developed ARINC 653 specification as a standardized Real Time Operating System (RTOS) interface definition for IMA. It allows hosting multiple applications of different software levels on the same hardware in the context of IMA architecture. This paper describes a study that provided the avionics software design for separation of fault and backup of core function to reduce workload of pilot with cost efficiency.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.17 no.3
• /
• pp.1-8
• /
• 1990

The digital terrain model (DTM) or digital elevation model (DEM) is commonly used in representing the continuous variation of relief over space. One of the most frequent applications is to display the three dimensional view of the landform concerned. In this paper, the altitude matrices-regular grid cell format of the elevation in Mt. Kyeryong National Park were used in developing the three dimensional view software for the first time in Korea. It required the removal of hidden lines or surfaces. To do this, it was necessary to identify those surfaces and line segments that are visible and those that are invisible. Then, only the visible portions of the landform were displayed. The assumption that line segments are used to approximate contour surfaces by polygons was used in developing the three dimensional orthographic view. In order to remove hidden lines, the visibility test and masking algorithms were used. The software was developed in the engineering workstation, SUN 3/280 at the Institute of Space Science and Astronomy using 'C' in UNIX operating system. The software developed in this paper can be used in various fields. Some of them are as follows : (1) Landscape design and planning for identifying viewshed area(line of sight maps) (2) For planning the route selection and the facility location (3) Flight simulation for pilot training (4) Other landscape planning or civil engineering purposes