• Journal of Astronomy and Space Sciences
• /
• 제39권4호
• /
• pp.181-194
• /
• 2022

Korea Pathfinder Lunar Orbiter (KPLO), also known as Danuri, was successfully launched on 4 Aug. from Cape Canaveral Space Force Station using a Space-X Falcon-9 rocket. Flight dynamics (FD) operational readiness was one of the critical parts to be checked before the flight. To demonstrate FD software's readiness and enhance the operator's contingency response capabilities, KPLO FD specialists planned, organized, and conducted four simulations and two rehearsals before the KPLO launch. For the efficiency and integrity of FD simulation and rehearsal, different sets of blind test data were prepared, including the simulated tracking measurements that incorporated dynamical model errors, maneuver execution errors, and other errors associated with a tracking system. This paper presents the simulation and rehearsal results with lessons learned for the KPLO FD operational readiness checkout. As a result, every functionality of FD operation systems is firmly secured based on the operation procedure with an enhancement of contingency operational response capability. After conducting several simulations and rehearsals, KPLO FD specialists were much more confident in the flight teams' ability to overcome the challenges in a realistic flight and FD software's reliability in flying the KPLO. Moreover, the results of this work will provide numerous insights to the FD experts willing to prepare deep space flight operations.

• 한국항공운항학회지
• /
• 제31권1호
• /
• pp.79-91
• /
• 2023

In response to the recent surge in aviation demand, major airports and aviation authorities continue to make efforts to formulate arrival and approach procedures that take into account efficient aircraft separation, noise and environmental issues of carbon (CO2) emissions. In order to ensure efficient traffic control and environmental issues, as a result, a new concept Trombone, Point Merge, etc. have been introduced and widely used in the domestic airspace. However, these new concept procedures which do not properly reflect the characteristics of the aircraft operation performance and the FMS vertical descent guidance hinder flight efficiency as well as bring in turn negative factors such as level-off flight and the use of drag device at the busiest phase of the flight descent operation, like the Continuous Descent Operation (CDO). Accordingly, throughout modification the current Standard Terminal Arrival Route (STAR) and Instrument Approach Procedure(IAP) that reflect the aircraft descent performance and the FMS guidance, the flight operation safety and efficiency is expected to be improved eventually. We herewith analyze and propose the way of improving flight efficiency in the arrival operation procedure by supplementary modification which consequently contribute to the aviation industry international competitiveness.

• 한국항공운항학회지
• /
• 제18권4호
• /
• pp.106-112
• /
• 2010

After a series of aircraft noise measurements conducted in Noise Sensitive Areas(NSAs) in Gangwha Island, there appeared to be no regions affected by aircraft noise of over 75 WECPNL, the legal noise level standard for aircraft operations. However, with regard to the future environment where flight operations at Incheon International Airport are likely to escalate, an INM analysis result drawn shows that the number of regions afflicted by such noise will increase in Gangwha Island. Therefore, we studied similar cases from developed countries, which are pertinent to solutions for aircraft noise abatement in the vicinity of airports and herewith provided 6 more flight operation procedures other than those 3 currently in service at Incheon International Airport.

• International Journal of Aeronautical and Space Sciences
• /
• 제8권1호
• /
• pp.115-121
• /
• 2007

The aeroelastic analysis of rotor blades with trailing edge flaps, focused on reducing vibration while minimizing control effort, are investigated using large deflection-type beam theory in forward flight. The rotor blade aerodynamic forces are calculated using two-dimensional quasi-steady strip theory. For the analysis of forward flight, the nonlinear periodic blade steady response is obtained by integrating the full finite element equation in time through a coupled trim procedure with a vehicle trim. The objective function, which includes vibratory hub loads and active flap control inputs, is minimized by an optimal control process. Numerical simulations are performed for the steady-state forward flight of various advance ratios. Also, numerical results of the steady blade and flap deflections, and the vibratory hub loads are presented for various advance ratios and are compared with the previously published analysis results obtained from modal analysis based on a moderate deflection-type beam theory.

• 한국항공운항학회지
• /
• 제21권1호
• /
• pp.39-44
• /
• 2013

The amount of greenhouse gas (GHG) emissions has been increasing steadily over the last 4 years, averaging 6.8 percent a year, due to the growth of low cost carriers and the increased demand for air transportations. For the aviation GHG reduction, various fuel saving activities are implemented in many areas such as high-efficiency aircraft and bio-fuel development in the technical part and low carbon flight procedures, short cut route development in the operational approach. Among the various reduction technologies, we focused on low carbon flight procedures that are crucial to GHG reduciton and suggested a reduction effect according to target implementation rate using by fuel saving estimation data in each aircraft type.

• 한국군사과학기술학회지
• /
• 제26권3호
• /
• pp.252-261
• /
• 2023

Analysis of dynamic characteristics and flight vibration test for unmanned aerial vehicles was studied by using dummy test body. The FEM model for dummy test body was supplemented by results of modal and random vibration test. The free end boundary condition to simulate flight environments was made by test setup using bungee cable. Prior to the flight vibration test using a dual electric vibration exciters, the test procedure to calculate quantitative vibration level was studied by using military specification. The actual test was successfully done by using the analysis and pretest results. From the analysis results, it was possible to determine the feasibility of the test by predicting the excitation force of the flight vibration test and to get the response of any point which could not be measured by the test. The results of this study will much contribute to the Test and Evaluation of unmanned aerial vehicles.

• 한국군사과학기술학회지
• /
• 제19권5호
• /
• pp.606-612
• /
• 2016

A Captive Flight Test(CFT) is used to verify the performance of missile component such as seeker and guiding algorithm of missile. Recently most of surface to air missile adapts multi-mode guidance method which include command guidance and active/passive guidance. A CFT system for missile system adapting multi-mode guidance method consists of pod equipment, command transmitting system and measuring system. In this paper, we proposed CFT system and testing method for missile which adapt multi-mode guidance, and system integration procedure by using distributed missile system integration method and procedure. The proposed CFT system and system integration method was applied to CFT of surface to air missile, and brought successful result.

• 항공우주시스템공학회지
• /
• 제9권3호
• /
• pp.23-30
• /
• 2015

In this study, a transient structural load analysis system was constructed to calculate the applied load on the suspension equipment corresponding to the aircraft flight conditions based on military specifications. Aircraft flight data (altitude, velocity, acceleration, angle of attack and etc. at aircraft center of gravity) were used as input parameters and the calculated load of the suspension equipment at wings on the left and right side was printed out for the structural load analysis. As a calculation procedure, first of all, load analysis was carried out at the center of gravity of the external store, Secondly, a trial reaction force analysis was conducted on hook and swaybrace of suspension equipment. All procedure of calculations was programed to analyze the structural load automatically. To verify the numerical results, structural load analysis using the experimental flight data was performed.

• 항공우주시스템공학회지
• /
• 제9권2호
• /
• pp.25-33
• /
• 2015

Global market of unmanned aircraft(UA) is rapidly expending based on the versatile and efficient utility of the UA. Domestically many industries, universities and research institutes are trying to do research and development of the UA in various angle of aspect. In spite of these effort, all the participants of research and development of the UA has been suffering the difficulty of acquiring the airspace around vicinity of Goheung airfield for the flight test of UA. Although the current procedure of execution of the flight test of UA is set after acquiring the airspace by applying the NOTAM(Notice To Air Man) to the Ministry of Land, Infrastructure and Transport(MLIT) at least 7 days before the flight test and commencing with the publication of the NOTAM by MLIT, if the flight test is carried out as planned, changing or reapplying the NOTAM expends mort time and makes difficulty often. Therefore it is needed that a restricted airspace for the flight test of UA is established and make all the executioner of flight test uses the exclusive airspace without limitation. This research proposes the restricted airspace with short term and long term establish requirement of airspace separately. The short term requirement has been established with the airspace of 10 nm radius and 8,000 ft altitude in which the requirements of flight test can be carried out more than 90% without needs of supplement of the additional airspace. The long term has been established within the airspace of 30 nm radius which is the maximum Radio Line Of Sight(RLOS) and 8,000 ft altitude with exclusion of current air way, airport control area, approaching corridor to the airport, existing restricted area(RA) and Military Operating Area(MOA) for the purpose of minimizing inconvenience of the other airspace user. Once establishing the exclusive airspace for the flight test of UA, research and development of industries, universities and research institutes will be more vigorous and contributes to the national economy.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.47.6-47
• /
• 2002

UAV(Unmanned Aerial Vehicle) has become one of the most popular military/commercial aerial robots in the new millenium. In spite of all the advantages that UAVs inherently have, it is not an easy job to develop a UAV because it requires very systematic and complete approaches in full development envelop. The ground test & evaluation phase has the utmost importance in the sense that a well developed system can be best verified on the ground. In addition, many of the aircraft crashes in the flight tests were resulted from the incomplete development procedure. In this research, a verification procedure of the whole airborne integrated system was conducted including the flight management sys...