• International Journal of Aeronautical and Space Sciences
• /
• v.2 no.2
• /
• pp.95-107
• /
• 2001

This paper is devoted to the parameter optimization of unmanned aerial vehicle's (UAV) flight control laws. Optimization procedure is based on the ideas of mixed $H_2/H_{\infty}$ control of multi-model plants. By using this approach, some partial $H_2$-terms defining the performance of nominal and parametrically perturbed Flight Control System (FCS) responses to deterministic command signals in stochastic atmosphere as well as $H_{\infty}$-terms defining robustness of the FCS can be incorporated in the composite cost function. Special penalty function imposed on the location of closed-loop system's poles keeps the speed of response and oscillatory properties for both nominal and perturbed FCS in reasonable limits. That is the reason why this procedure may provide reasonable trade-off between the performance and robustness of FCS that are very important especially for UAV. Its practical importance is illustrated by case studies of lateral and longitudinal control of small UAV.

• Journal of Advanced Navigation Technology
• /
• v.18 no.4
• /
• pp.288-295
• /
• 2014

Current ILS is difficult for the many aircraft to access to the system at the same time because of it's system. And the equipments should be installed at the direction of every runway. Also, There is limitation that landing procedures must be have of only ILS single course when the aircraft land on the ground. hereupon, The more air traffic exist, the longer delay time of flight be. GBAS using the GNSS has been developed to overcome those limitations. Before flight test in Teean airport, this paper compares the taean approach procedure and curved approach procedure by using the simulator. Comparison study shows that curved approach procedure takes less flight time, low fuel consumpsion and make it possible to avoid noise airspace more than original procedure.

• Journal of Advanced Navigation Technology
• /
• v.28 no.3
• /
• pp.272-277
• /
• 2024

In most countries, instrument flight procedures are designed by applying one of the following standards: the International Aviation Organization's DOC 8168, Air Navigation Services and Operation Procedures (PANS-OPS), or the US Federal Aviation Administration's TERPS, Terminal Procedures. In particular, the circling approach procedure has many differences between the two standards, and the US terminal procedure (TERPS) has become more complicated since 2013 by applying expanded standards depending on altitude. The circling approach procedures are more risky than straight-in approach procedures because it involves maneuvering the aircraft close to the ground at low energy for landing. In order to accurately understand these differences, this study provides to distinguish by what criteria the circling approach procedure is designed according to individual domestic airports in Korea, to calculate the radius for the range of circling approach areas that guarantee minimum obstacle avoidance during circling approach maneuvers, and to present methods for performing safe circling approach procedures.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.23 no.2
• /
• pp.51-56
• /
• 2015

This paper presents the procedure of drag prediction for EAV-1, based on a numerical analysis correlated to an in-flight test. EAV-1, developed by Korea Aerospace Research Institute, is a small-sized UAV to test a hydrogen-fuel cell power system. The long-endurance test flight of 4.5 hours provides numerous in-flight data. The thrust and drag of EAV-1 during the flight test are estimated based on the wind-tunnel test results for EAV-1's propeller performance. In addition, the CFD analysis using a commercial Navier-Stokes code is carried out for the full-scale EAV-1. The computational result suggests that the initial CFD analysis substantially under-predicts the in-flight drag in that the discrepancy is up to 27.6%. Therefore, additional investigation for more accurate drag prediction is performed; the effect of propeller slipstream is included in the CFD analysis through "fan disk" modelling. Also, the additional drag from airplane trim and load factor that actually exists during the flight test in a circular path is considered. These supplemental analyses for drag prediction turn out to be effective since the drag discrepancy reduces to 2.3%.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.18 no.2
• /
• pp.54-59
• /
• 2010

The flight deck crew must manage complexity during daily flight operations. The Airline may obtain data regarding threats and errors through LOSA(Line Operations Safety Audits) on normal flights as predictive safety tool in Safety Management System of the Airline to actively improve the systems such as SOP(Standard Operation Procedure), training, evaluation and the TEM(Threat and Error Management) for the flight deck crew. The flight deck crew make errors when they fail managing threats. The crew mismanage around ten percent of threats and commit errors. The major mismanaged threats are aircraft malfunction, ATC(Air Traffic Communication), and wether threats. The effective countermeasures of TEM for manageing threats are leadership, workload management, monitor & cross check, Vigilance, communication environment and cooperation of the crew. It is important that organizations must monitor for the hazards of threats and improve system for the safer TEM environments.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.171-174
• /
• 2007

The COMS flight software is implemented by ADA language and the high level application program language (APL). The APL is used to implement the Interpreted Program (IP) functions which are running on the processor. The IP functions have been developed for the payload management and monitoring with the automatic on-board operational procedure. The IP allows an easier re-programming if necessary. The ground can load or unload IP separately from ADA code in the RAM flight software. The uploaded IP is interpreted and executed by the Interpreted Program Environment (IPE) which is one of the functions implemented in the RAM flight software. In this paper, we introduce the IP and IPE function.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.25 no.1
• /
• pp.35-39
• /
• 2017

The engine is the most significant and essential part of the aircraft. As a result, systematical handling in the aircraft development stage is required from engine design to implementation to the full-scale airframe. This survey demonstrates the procedures demanded by the KAS 23 Civil Aircraft to acquire the engine Type Certification and the flight test procedures for ensuring the operational stability. Surveys were conducted on domestic and international aircraft engine certifications, technical regulations and documentations related to the Means of Compliance for flight test development stage. In addition, organized reference items that should be considered for the certification of engine flight test procedures were reviewed based on the KC-100.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.8
• /
• pp.657-664
• /
• 2013

The flight loads analysis was carried out on the aircraft with high aspect ratio flexible wings by using commercial software MSC/NASTRAN. The aerodynamic model for flight loads analysis was corrected, compared with results of the wind tunnel test. And in-house program was developed for pre and post works. In-house program enabling management of much data automatically consists of three modules: 'Construction of the mass distributed model', 'Selection of critical load cases', 'Generation of external loads for structural design'. By utilizing these techniques and programs, the procedure of flight loads analysis was established for effective development of an aircraft.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.7
• /
• pp.629-634
• /
• 2008

This paper presents the flight test procedure and the results for the airspeed indicator calibration of a light airplane the name of ChangGong-91, which is the first type certified aircraft from Korean Ministry of Construction and Transportation, as a part of the flight test validation to get the certification. The flight tests for airspeed position error calibrations are conducted using tower fly by method in order to calibrate swivel head testboom which is attached to the right wing tip of the airplane. Also system to system method is applied in order to calibrate the airspeed indicator of the cockpit. The flight test is conducted at the basis of the 'Korean Airworthiness Standard' which is the regulation of Korean Ministry of Construction and Transportation. The airspeed error range for the testboom and the airspeed indicator are determined to $-0.75{\sim}+0.75$ knot and to $-4.0{\sim}+2.0$ knots, respectively. The calibration results are applied to ChangGong-91 Flight Operation Manual.

• Journal of Korean Society for Quality Management
• /
• v.49 no.3
• /
• pp.255-268
• /
• 2021

Purpose: We sought to understand why a high-speed rotating projectile featuring a fuze-and-body assembly sometimes exhibited airburst, and we intended to improve the flight stability by eliminating airburst. Methods: We performed characteristic factor analysis, structural mechanics modeling, and dynamic modeling and simulation; and we scheduled firing tests to discover the cause of airburst. We used a step-by-step procedure to analyze the reliability function for selecting the bonding force standard that prevents airburst. Results: The 00MM high-speed rotating projectile features a fuze bonded to a body assembly; the bonding sometimes can break on firing. The resulting contact force, vibration and roll damping during flight generated yaw. Flight became unstable; fuze operation triggered an airburst. Our reliability test improved the bonding force standard (the force was increased). When the bonding force was at least the minimum required, a firing test revealed that airburst/flight instability disappeared. Conclusion: Analysis and identification of the causes of flight instability and airburst render military training safer and enhance combat power. Ammunition must perform as designed. Our method can be used to set standards that improve the performances of similar types of ammunition.